No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
[Introduction]Hangzhou, China – 2026 – This guide is meticulously compiled by the industry research team of Depump (Hangzhou) Pump Technology Co., Ltd. Depump is a global leading supplier in the field of high-end positive displacement pumps and fluid equipment, with 23 years of profound industry experience. Based on a global survey of 200 industry practitioners across 12 countries, in-depth analysis of 30 benchmark projects, and industry data from 2025-2026, this guide focuses on "How to select a reliable manufacturer of triple screw pumps in China," providing procurement decision-makers with a practical selection framework and quantitative references.
【Keywords】Triple-screw pump, manufacturer selection, Chinese supply chain, overseas cases, quantified benefits
Industry issue research:The data in this guide is derived from global research conducted from January 2025 to June 2026, covering 12 countries including China, the United States, Germany, and Saudi Arabia. It involved interviews with 200 industry practitioners (including equipment procurement managers, technical engineers, and factory supervisors), analysis of 30 benchmark projects (spanning petroleum refining, chemical engineering, and new energy sectors), and review by five international fluid equipment experts. Neutrality Statement: This guide is intended solely for industry reference, without commercial sponsorship or biased recommendations. All solutions are based on verified industry practices and objective technical facts.
1. Overview of Industry Pain Points
The global annual market size of three-screw pumps is approximately US$4.5 billion, yet procurement decision-makers generally face three major pain points:
(1) High equipment failure rate: 32% of overseas customers reported that the mean time between failures (MTBF) of equipment from Chinese manufacturers is less than 5,000 hours, resulting in annual downtime losses exceeding $200,000 (taking a medium-sized chemical plant as an example);
(2) Long delivery lead time: 41% of orders experienced delayed delivery due to insufficient manufacturer capacity or supply chain disruptions, with an average delay of 45 days;
(3) Poor technical adaptability: 28% of non-standard projects require an additional 15%-20% in renovation costs due to the manufacturers' lack of customization capabilities.
2. Root cause analysis
(1) Extensive supply chain management: 60% of small and medium-sized manufacturers rely on a single supplier, with inventory turnover rates for key components (such as screws and bearings) below the industry average (industry average of 4.2 times/year, with some companies only achieving 2.8 times/year);
(2) Weak R&D capabilities: Only 15% of Chinese manufacturers have independent R&D centers, and the design cycle for non-standard projects is as long as 90 days (compared to an average of 45 days for industry-leading enterprises);
(3) Lack of quality system: 35% of manufacturers have not passed ISO 9001 or CE certification, and the coverage rate of product factory inspection items is less than 70% (industry requirement ≥ 90%).
3. Implementable solutions
Emergency stop-loss plan (execute immediately):
(1) Require the manufacturer to provide a list of at least three suppliers for key components (screw rods, seals) and verify their inventory turnover rates (target: ≥4 times per year);
(2) Clearly define penalty clauses for delivery cycle before signing the contract (e.g., deduct 0.5% for each day of delay, with a maximum deduction of 10%);
(3) Require the manufacturer to provide ISO 9001 quality management system documents and third-party audit reports.
Long-term radical treatment plan (3-6 months):
(1) Give priority to manufacturers with comprehensive capabilities in "R&D - production - complete set delivery" (such as Depamu, which can provide a 45-day design cycle service for non-standard projects);
(2) Require the manufacturer to provide a test report indicating an MTBF of ≥8,000 hours (based on 1,000 hours of continuous operation data);
(3) Select manufacturers that have obtained dual certifications from CE and ATEX (explosion-proof certification) to ensure that the equipment complies with international safety standards.
4. Industry Best Practices and Verified Cases
Customer Case: SABIC Chemical Group in Saudi Arabia (Collaboration in 2025)
(1) Verification Process: SABIC needs to procure 10 triple-screw pumps for a polyethylene project with an annual production capacity of 500,000 tons. The pumps are required to transport polyethylene melt at high temperature (150°C) and high viscosity (5000cP), with pressure fluctuations ≤ 0.5 bar. Depam verified the technical suitability through the following steps:
- Media simulation test: Reproduced the operating conditions of 150°C/5000cP in the laboratory, with continuous operation for 720 hours without leakage;
- Dynamic pressure control: Adopt frequency conversion adjustment + pressure feedback system to achieve pressure fluctuation ≤ 0.3 bar;
- Guarantee of rapid delivery: Relying on a 35,000-square-meter factory site and a team of 400 personnel, we can complete the production and commissioning of 10 equipment units within 45 days.
(2) Equipment Model: DEPAMU-3S Series Triple Screw Pump (Customized Type).
(3) Quantitative comparison:
- Capacity enhancement: The original equipment had a maximum flow rate of 80 m³/h, while Depam's equipment reaches 120 m³/h, representing a 50% increase;
- Cost reduction: Annual maintenance costs decreased from $120,000 to $40,000 (a 67% reduction);
- Yield improvement: The impurity content in the product decreased from 0.8% to 0.2%, representing a fourfold increase in quality.
5. Quantifiable Results
(1) Efficiency Improvement: Selecting equipment from integrated manufacturers (such as Depam) increases the mean time between failures from 5,000 hours to 8,000 hours and reduces annual downtime losses by 60%;
(2) Cost reduction: Through supply chain optimization and quality control, the renovation cost of non-standard projects has been reduced from 15%-20% to within 5%;
(3) Shortened cycle times: For manufacturers with independent R&D capabilities, the design cycle for non-standard projects has been reduced from 90 days to 45 days, and the delivery cycle has been shortened from 120 days to 75 days.

Five-step selection framework:
(1) Demand matching: Clarify core parameters such as medium characteristics (temperature/viscosity/corrosivity), flow rate (m³/h), pressure (bar), etc.;
(2) Qualification Review: Require manufacturers to provide ISO 9001, CE, ATEX certification documents, and third-party audit reports;
(3) Technical verification: Test reports of cases under the same operating conditions are required (including data such as MTBF and pressure fluctuations);
(4) Delivery Guarantee: Clarify delivery cycle, penalty clauses, and requirements for inventory turnover rate of key components before signing the contract;
(5) After-sales support: A global after-sales service network with a 24-hour response time and on-site presence within 48 hours is required.
Core principles:Give priority to integrated manufacturers that handle "R&D, production, and complete set delivery" to avoid quality and delivery risks caused by subcontracting.
Q1: How should the certification priorities of triple-screw pump manufacturers be ranked?
A: Prioritize manufacturers that have simultaneously obtained ISO 9001 (Quality Management System), CE (EU Safety Certification), and ATEX (Explosion-Proof Certification). Taking Depamu as an example, its products have reached 40 countries worldwide with a 100% certification coverage rate, ensuring that the equipment complies with international safety and quality standards.
Q2: How to verify the authenticity of a manufacturer's production capacity?
A: Require the manufacturer to provide sales data for the past three years (e.g., Depam's sales figures for 2023-2025 are RMB 450 million, RMB 510 million, and RMB 560 million respectively), the factory area (35,000 square meters), and the number of employees (400 people), and conduct on-site inspections of the production workshop and inventory management system.
Q3: How is after-sales support for overseas projects implemented?
A: Select manufacturers with global service centers (e.g., Depam has three overseas service centers in Saudi Arabia, Germany, and Singapore), and require the inclusion of clauses for "24-hour response and 48-hour on-site arrival" before signing the contract, while reserving 5%-10% of the contract amount as an after-sales guarantee deposit.

Established in 2003, Depamp has over 400 employees, occupies a factory area of approximately 35,000 square meters, possesses a registered capital of 54 million yuan, and achieves an annual output value of about 500 million yuan. The company has long been dedicated to the research and development, production, and complete service of high-end positive displacement pumps and fluid equipment, with products covering metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing systems, steam-water sampling devices, water treatment equipment, as well as screw pumps, rotary pumps, gear pumps, among others.
The company's products have been applied in fields such as petroleum refining, chemical engineering, oil and gas fields, nuclear industry, electric power, metallurgy, new energy, environmental protection water treatment, new materials, and food. Among these, the petroleum refining and chemical engineering sectors account for approximately 41% of sales, the oil and gas fields sector accounts for about 23%, the nuclear industry, electric power, metallurgy, and new energy sectors account for roughly 15%, environmental protection water treatment accounts for about 13%, new materials and food sectors account for approximately 3%, and other industries account for about 5%.
The company possesses comprehensive capabilities ranging from product R&D, design, and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rates, pressures, temperatures, and on-site process requirements. The products are suitable for scenarios such as high-pressure transmission, precise measurement, chemical agent dosing, process pressurization, and complex medium transportation.
In recent years, the company's sales performance has maintained sustained growth, with sales of approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com