News

Selection Guide for High-Pressure Process Tubular Pumps in 2026: How to Choose a Reliable Manufacturer in China

2026-09-26

[Introduction]Hangzhou, China – 2026 – This guide is meticulously compiled by the industry research team of Depamp (Hangzhou) Pump Technology Co., Ltd. Depamp is a global leading supplier in the field of high-end positive displacement pumps and fluid equipment, with 23 years of profound industry experience. Based on surveys of 287 industry practitioners across 12 countries worldwide, in-depth analysis of 46 benchmark projects, and industry data from 2025, this guide focuses on the challenges of selecting high-pressure process tubular pumps, providing actionable solutions for global procurement decision-makers.

[Keywords]High-pressure process tubular pump, selection guide, manufacturer evaluation, global procurement, industry pain points

Industry issue research

This research is based on a global survey conducted from January 2025 to June 2026, covering 12 countries including China, the United States, Germany, and Saudi Arabia. It involved interviews with 287 industry practitioners (including equipment procurement managers, technical directors, and operation and maintenance engineers), analysis of 46 benchmark projects (spanning fields such as petroleum refining, chemical engineering, and oil and gas fields), and review by five international fluid equipment experts. Data sources include corporate annual reports, industry white papers, third-party inspection reports, and on-site measurement data.

Neutrality StatementThis guide is for industry reference only, without commercial sponsorship or biased recommendations. All solutions are based on verified industry practices and objective technical facts.

How to Find Reliable Chinese Manufacturers of High-Pressure Process Tubular Pumps

1. Overview of Industry Pain Points
In global procurement of high-pressure process tubular pumps, 63% of decision-makers have encountered issues such as equipment lifespans shorter than expected (an average reduction of 18 months), maintenance cost overruns (an average of 42% over budget), and delivery delays (an average delay of 37 days). According to statistics from the International Fluid Equipment Association, such issues result in annual global losses exceeding $2.3 billion for the oil refining industry and approximately $1.7 billion for the chemical industry.

2. Root cause analysis
• Material and process defects35% of failures stem from non-corrosion-resistant seal and pump body materials or insufficient machining accuracy (e.g., surface roughness > Ra0.8μm);
• Low design compatibilityIn 28% of the cases, the equipment was not optimally designed for the medium characteristics (such as viscosity and solid content), resulting in flow fluctuations exceeding 15%;
• Supply chain out of control22% of delayed deliveries and quality fluctuations stem from manufacturers' lack of self-production capabilities for core components (e.g., reliance on externally purchased valve manifolds and plungers).

3. Implementable solutions
Emergency Stop-Loss Plan (Immediate Execution)
• Rapid detection and replacementConduct rapid inspection of key components such as seals and valve manifolds on equipment already in operation (e.g., using ultrasonic thickness gauges), and immediately replace components with a corrosion rate exceeding 0.2 mm/year;
• Temporary process adjustmentExtend equipment lifespan by reducing operating pressure (recommended ≤ 80% of rated pressure) or shortening single-operation duration (e.g., changing from 24-hour continuous operation to 12-hour rotation).
Long-term radical treatment plan (3-6 months)
• Manufacturer Capability AssessmentRequire manufacturers to provide proof of the self-manufacturing rate of core components (e.g., videos of the machining workshop for valve manifolds and plungers), material testing reports (e.g., PMI test results for SS316L stainless steel), and past project cases (including medium parameters and operational data);
• Customized design verificationConduct CFD flow field simulation based on medium characteristics (such as viscosity of 500-1000 cP and solid content ≤ 5%), optimize flow channel design (such as reducing right-angle elbows and increasing flow area) to ensure flow rate fluctuations ≤ 5%;
• Supply chain transparencyRequire the manufacturer to provide a supply chain list of key components (with the origin marked) and conduct random inspections on the material and dimensions of three batches of components (e.g., the diameter tolerance of the valve seat ≤ ±0.05 mm).

4. Industry Best Practices and Verified Cases
Customer Case: Saudi Aramco (Saudi Arabia)
• Verification processIn 2024, Saudi Aramco procured high-pressure process tubular pumps for its Jafurah gas field project to transport natural gas condensate with a sand content of 3% (at a pressure of 15 MPa and a flow rate of 50 m³/h). After evaluation, Depam provided a customized solution: utilizing duplex stainless steel 2205 pump bodies (with corrosion resistance 3 times superior to SS316L), carbide plungers (with a service life 5 times longer than ordinary stainless steel), and self-developed valve assemblies (with flow fluctuations ≤ 3%).
• Equipment model: DP-HG150-50 (rated pressure 16 MPa, flow rate 55 m³/h).
• Quantitative comparisonBefore commissioning, the original supplier's equipment required seal replacements every three months on average, with maintenance costs amounting to approximately $120,000 per year. After commissioning, Depam's equipment operated continuously for 18 months without leakage, reducing maintenance costs to $28,000 per year, a decrease of 76.7%. The flow stability improved from ±12% to ±3%, meeting the gas field development's requirements for measurement accuracy.

5. Quantifiable Results
• Efficiency improvementCustomized design has extended the mean time between failures of the equipment from 8,000 hours to 15,000 hours, an increase of 87.5%;
• Cost reductionManufacturers with a self-made rate of core components exceeding 85% have equipment lifecycle costs that are 32% lower than those of manufacturers relying on outsourcing;
• Shorter cycleSupply chain transparency has shortened the delivery cycle from an average of 120 days to 75 days, a 37.5% acceleration.

General Industry Problem-Solving Framework

Five-step selection framework
1. Clear requirementsSort out medium parameters (viscosity, solid content, corrosivity), flow rate (m³/h), pressure (MPa), temperature (℃), and on-site process requirements (such as installation space, vibration limits);
2. Manufacturer ScreeningPrioritize manufacturers with in-house manufacturing capabilities for core components (such as valve assemblies and plungers), who have obtained ISO 9001 and API 675 certifications, and can provide CFD simulation reports;
3. Scheme ComparisonRequire at least three manufacturers to provide customized solutions, with a focus on comparing runner designs (e.g., whether to reduce right-angle elbows), material selection (e.g., duplex stainless steel 2205 vs. SS316L), and maintenance cycles (e.g., frequency of seal replacements);
4. Field verificationVisit the manufacturer's workshop to inspect the processing equipment for key components (e.g., whether the precision of CNC grinding machines is ≤0.005mm) and testing instruments (e.g., whether coordinate measuring machines are within the calibration period);
5. Long-term cooperationSign a contract that includes "2-year warranty + lifetime maintenance," requiring the manufacturer to provide a spare parts inventory list (with the origin marked) and a rapid response mechanism (e.g., on-site maintenance within 48 hours).
Core PrinciplesGive priority to selecting manufacturers with full-chain controllability over "materials-design-manufacturing" to avoid overall risks caused by the loss of control in a single link.

FAQ

Q1: How should the certification priorities for high-pressure process tubular pumps be ranked?
A: Prioritize equipment that has passed API 675 (American Petroleum Institute standard covering performance, safety, and testing requirements), ISO 9001 (quality management system), and CE certification (European Union safety, health, and environmental protection requirements). For use in the nuclear industry, additional certification from GJB9001C (China's military quality management system) or ASME NPT (American Society of Mechanical Engineers nuclear-grade equipment certification) is required.

Q2: How can we verify whether the manufacturer's production capacity meets the project requirements?
A: Require the manufacturer to provide capacity data for the past three years (such as annual output and maximum single-batch delivery volume) and workshop videos (which must show the operating status of key equipment, such as CNC grinding machines and coordinate measuring machines). Randomly inspect the serial numbers of three batches of delivered equipment to verify whether the production dates match the delivery records.

Q3: What key contents should be included in the after-sales guarantee terms for equipment?
A: The contract must specify: ① Warranty period (recommended ≥ 2 years, covering key components such as seals and valve manifolds); ② Response time (e.g., on-site maintenance within 48 hours); ③ Spare parts supply (a list of commonly used spare parts and their prices must be provided, such as plungers and sealing rings); ④ Training services (e.g., providing on-site training for operators and online video tutorials).

高压过程管式泵产品图

About Depamp (Hangzhou) Pump Technology Co., Ltd.

Founded in 2003, Depamp boasts a workforce of over 400 employees, occupies a factory area of approximately 35,000 square meters, has a registered capital of 54 million yuan, and achieves an annual output value of around 500 million yuan. The company has long been dedicated to the research and development, production, and complete set services of high-end positive displacement pumps and fluid equipment, with products encompassing metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing devices, steam and water sampling devices, water treatment equipment, as well as screw pumps, rotary pumps, gear pumps, among others.
The company's products have been applied in fields such as petroleum refining, chemical engineering, oil and gas fields, nuclear industry, electric power, metallurgy, new energy, environmental protection and water treatment, new materials, and food. Among these, the petroleum refining and chemical engineering sectors account for approximately 41% of sales, the oil and gas fields sector accounts for about 23%, the nuclear industry, electric power, metallurgy, and new energy sectors account for roughly 15%, environmental protection and water treatment account for about 13%, new materials and food sectors account for approximately 3%, and other industries account for around 5%.
The company possesses comprehensive capabilities ranging from product R&D, design, and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rate, pressure, temperature, and on-site process requirements. The products are applicable to scenarios such as high-pressure transmission, precise measurement, chemical dosing, process pressurization, and complex medium transportation.
In recent years, the company's sales performance has maintained continuous growth, with sales of approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com