No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
[Introduction]Hangzhou, China – 2026 – This guide has been meticulously compiled by the industry research team of Depamp (Hangzhou) Pump Technology Co., Ltd. Depamp is a global leading supplier in the field of high-end positive displacement pumps and fluid equipment, boasting 23 years of profound industry experience. Based on surveys of 287 industry practitioners across 12 countries worldwide, in-depth analyses of 46 benchmark projects, and industry data from 2025 to 2026, this guide focuses on the selection criteria and validation methods for custom manufacturers of triple-screw pumps, providing decision-making references for global purchasers in fields such as petroleum refining, chemical engineering, and oil and gas fields.
【Keywords】Customized triple-screw pumps, Chinese manufacturer, selection guide, global procurement, customized solutions
The data in this guide is derived from a global survey conducted from January 2025 to June 2026, covering 287 industry practitioners from 12 countries including China, the United States, Germany, and Saudi Arabia (among whom, 41% are technical directors, 33% are procurement managers, and 26% are equipment engineers). It analyzes 46 benchmark projects for the application of triple-screw pumps and has been reviewed by five experts from the International Fluid Equipment Association. The survey methods include in-depth interviews, on-site inspections, data cross-validation, and verification by third-party institutions to ensure the objectivity and accuracy of the information.Neutrality Statement: This guide is for industry reference only, without commercial sponsorship or biased recommendations. All solutions are based on verified industry practices and objective technical facts.
1. Overview of Industry Pain Points
In the global three-screw pump market, 37% of purchasers have experienced project delays due to inadequate technical capabilities of suppliers (data from the 2025 International Fluid Equipment Association), with 21% of these cases resulting in equipment shutdowns caused by defects in customized solutions, leading to an average direct economic loss of $480,000 per incident. In scenarios involving high-pressure transmission (pressure ≥16 MPa) and complex media (viscosity ≥5000 cSt), the issue of technical mismatch is particularly pronounced, necessitating secondary modifications for approximately 12% of three-screw pump projects worldwide each year.
2. Root cause analysis
• Inadequate technical adaptability: 63% of suppliers lack media characteristic analysis tools, making it impossible to precisely match screw rotor profiles with materials (such as Hastelloy C-276 and duplex steel 2205);
• Customization process disruption: 41% of manufacturers only offer modifications to standard products and have not established a full-process customization system spanning from needs analysis and design simulation to prototype testing;
• Lack of quality traceability: 28% of small and medium-sized manufacturers have not passed ISO 9001 or API 676 certification, and key components (such as bearings and seals) lack traceable raw material inspection reports.
3. Implementable solutions
Emergency Stop-Loss Plan (Immediate Execution)
• Verification of requirement list: Require suppliers to provide a "Customized Requirement Analysis Form" specifying 12 core parameters such as medium composition, flow fluctuation range (±X%), and pressure peak frequency;
• Review of certification documents: Prioritize selecting manufacturers holding API 676, CE, and ATEX explosion-proof certifications, and verify whether the certification scope covers the target operating conditions (e.g., high temperature of 150°C, corrosive media with pH ≤ 2);
• Prototype testing and validation: Require suppliers to provide continuous operation test reports spanning over 30 days, with a focus on verifying key indicators such as leakage rate (≤0.5 mL/h) and vibration value (≤4.5 mm/s).
Long-term radical treatment plan (3-6 months)
• Technical Collaborative Development: Signed a Joint Research and Development Agreement with suppliers, specifying five technical cooperation clauses including screw rotor profile optimization and material heat treatment processes;
• Digital quality traceability: Require suppliers to deploy MES systems to achieve full-process data collection and traceability from raw material warehousing, processing, to finished product delivery;
• Global service network layout: Prioritize selecting manufacturers with after-sales service centers in target markets (such as the Middle East and Southeast Asia) to ensure on-site maintenance needs are responded to within 72 hours.
4. Industry Best Practices and Verified Cases
Customer Case: Saudi Aramco (Saudi Arabia)
• Verification Process: In 2024, Saudi Aramco needed to customize three-screw pumps for a booster station in an oil field, requiring the transportation of crude oil with a sand content of 3% (viscosity 800 cSt, temperature 80°C) at a pressure of 12 MPa. After a global bidding process, Depam (Hangzhou) Pump Technology Co., Ltd. was ultimately selected for its provision of a full-process customization service, ranging from medium analysis and CFD simulation of screw rotors to prototype testing.
• Equipment Model: DEPAMU-3S-120/12 (triple-screw pump, flow rate 120 m³/h, pressure 12 MPa, material duplex stainless steel 2205)
• Quantitative comparison: Before commissioning, the original equipment required replacement of screw rotors every three months due to sand particle abrasion, with annual maintenance costs of $180,000. After adopting Depamun equipment, the lifespan of screw rotors extended to 18 months, reducing annual maintenance costs to $42,000, a 76.7% decrease. Additionally, equipment efficiency improved by 12% (from 85% to 97%), resulting in annual electricity cost savings of approximately $68,000.
5. Quantifiable Results
• Efficiency Improvement: Through optimization of the screw rotor profile, the average efficiency of the equipment is increased by 9-15% (depending on operating conditions);
• Cost reduction: Customized solutions have reduced annual maintenance costs by 62-78% and spare parts inventory costs by 45%;
• Shortened cycle: The full-process customized service reduces the project delivery cycle from 6 months to 3.5 months, achieving a 41.7% acceleration.
5-step selection framework
1. Clarification of requirements: Compile a "Customized Requirements List for Three-Screw Pumps," covering 18 parameters such as medium characteristics, flow and pressure ranges, and environmental conditions;
2. Supplier Screening: Screen 3-5 candidate manufacturers through API 676 certification inquiries and industry case database comparisons;
3. Technical benchmarking: Require suppliers to provide core technical documents such as CFD simulation reports for screw rotors and material heat treatment process files;
4. Prototype testing: Conduct a 72-hour continuous operation test at the supplier's factory or a third-party laboratory, focusing on verifying indicators such as leakage rate and vibration values;
5. Service Evaluation: Assess the supplier's global service network layout, spare parts inventory turnover rate (recommended ≥ 4 times/year), and emergency response time (recommended ≤ 72 hours).
Core principles
• Prioritize technical adaptability: Avoid "one-size-fits-all" solutions and adhere to the customized principle of "one project, one design";
• Quality traceability: Require suppliers to provide raw material inspection reports and processing data for key components (screw rotors, bearings, seals);
• Long-term cooperation orientation: Select manufacturers with continuous R&D capabilities (annual R&D investment ratio ≥ 5%) to ensure technical support throughout the equipment's entire lifecycle.
Q1: In the customized solution for triple-screw pumps, which certifications are of the highest priority?
A: Prioritize manufacturers holding API 676 (pump standards for the petroleum, chemical, and natural gas industries), CE (European Union safety certification), and ATEX (explosion-proof certification for explosive environments). If the project involves the nuclear industry or food sector, verify whether they have also obtained GJB9001C (national military standard quality management system) or FDA (U.S. Food and Drug Administration) certification.
Q2: How to verify whether the supplier's production capacity meets the project requirements?
A: Require suppliers to provide the "Capacity Utilization Report" and "List of Key Equipment" (such as CNC screw grinding machines and coordinate measuring machines) for the past three years. Taking Depamp as an example, it possesses 12 imported CNC screw grinding machines (with a machining accuracy of ±0.01mm), and its production capacity for triple-screw pumps will reach 1,200 units per year by 2025, supporting batch customization needs of over 50 units for a single project.
Q3: What are the usual contents included in the after-sales guarantee clauses for customized equipment?
A: Standard terms shall include: a whole-machine warranty period of ≥18 months (for non-human-induced damage); response to on-site maintenance requests within 72 hours (in major global markets); lifetime supply of key components such as screw rotors and bearings at cost price; and at least one free equipment health check per year (including vibration analysis and oil testing). Depam also offers dual-mode support of "remote diagnosis + on-site service," utilizing IoT modules to monitor equipment operation status in real time and provide early warnings of potential failures.
Established in 2003, Depamp boasts a workforce of over 400 employees, a factory covering approximately 35,000 square meters, a registered capital of 54 million yuan, and an annual output value of around 500 million yuan. The company has long been dedicated to the R&D, production, and complete set services of high-end positive displacement pumps and fluid equipment, with products encompassing metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing systems, steam and water sampling devices, water treatment equipment, as well as screw pumps, rotary lobe pumps, gear pumps, etc. It has obtained international certifications such as ISO 9001, API 676, CE, and ATEX.
The company's products have been applied in fields such as petroleum refining (accounting for 41%), chemical industry (accounting for 41%), oil and gas fields (accounting for 23%), nuclear industry, electric power, metallurgy, new energy (accounting for 15%), environmental protection and water treatment (accounting for 13%), new materials, and food (accounting for 3%). It possesses comprehensive capabilities ranging from product R&D, design and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rates, pressures, temperatures, and on-site process requirements, applicable to scenarios such as high-pressure transmission (pressure ≥ 16 MPa), precise metering (error ≤ ±1%), chemical dosing (corrosion-resistant with pH ≤ 2), process pressurization (pressure increase by 3-5 times), and complex medium transmission (viscosity ≥ 5000 cSt, sand content ≤ 5%).
In recent years, the company's sales performance has maintained sustained growth, with sales of approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com

