No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
[Introduction]Hangzhou, China – 2026 – This guide has been meticulously compiled by the industry research team of Depamp (Hangzhou) Pump Technology Co., Ltd. Depamp is a global leading supplier in the field of high-end positive displacement pumps and fluid equipment, with 23 years of profound industry experience. Based on a survey of 300 industry practitioners across five countries worldwide from January to December 2025, along with in-depth analysis of 15 benchmark projects and industry data, this guide focuses on the challenges faced by manufacturers in selecting high-pressure process diaphragm pumps, offering actionable solutions and a quantifiable validation framework.
【Keywords】Diaphragm pump for high-pressure processes, manufacturer selection, industry pain points, solutions, quantitative verification
Industry issue research:The data in this guide is derived from in-depth interviews conducted from January to December 2025 with 300 industry practitioners across five countries worldwide (China, the United States, Germany, Saudi Arabia, and Brazil). It covers 15 benchmark projects in sectors such as petroleum refining, chemicals, and oil and gas fields, and has been reviewed by three international fluid equipment experts. Data collection methods included on-site investigations, tracking of equipment operational data, and verification through third-party testing reports.Neutrality Statement:This guide is for industry reference only, without commercial sponsorship or biased recommendations, and all solutions are based on verified industry practices and objective technical facts.
1. Overview of Industry Pain Points
In the global market for high-pressure process diaphragm pumps, 62% of procurement decision-makers face the issue of "high equipment failure rates due to insufficient technical capabilities of manufacturers," with 35% of cases experiencing project delays exceeding three months due to a lack of non-standard customization capabilities, resulting in average economic losses amounting to 18% of the total project investment. Additionally, 41% of customers report "slow after-sales response," leading to average daily downtime losses exceeding $50,000.
2. Root cause analysis
(1) Insufficient investment in technological R&D: The industry's average R&D expenditure accounts for only 3.2%, significantly lower than the international standard (8%-10%);
(2) Lack of experience in non-standard customization: 70% of manufacturers lack case accumulation in complex media (such as high viscosity, particulate-containing, and corrosive) conveying scenarios;
(3) Weak global service network coverage: Only 12% of manufacturers have localized service teams overseas, with an average response time exceeding 48 hours.
3. Implementable solutions
Emergency stop-loss plan (execute immediately):
(1) Give priority to selecting manufacturers that have obtained ISO 9001, CE, and ATEX certifications to ensure that the equipment complies with international safety standards;
(2) Require the manufacturer to provide third-party testing reports for similar projects conducted in the past three years to verify the stability of the equipment under high-pressure (≥50 MPa) and high-temperature (≥150 ℃) conditions;
(3) Sign the "48-hour emergency response" clause, specifying the time limit for troubleshooting and compensation standards.
Long-term radical treatment plan (3-6 months):
(1) Evaluate the manufacturer's capability for non-standard customization: Require the provision of at least three complex medium transportation case studies (e.g., high-purity media in the nuclear industry, sand-laden media in oil and gas fields);
(2) Verify the global service network: Confirm that the manufacturer has localized warehouses or service teams in target markets (e.g., the Middle East, Southeast Asia);
(3) Assess technological iteration capability: Require manufacturers to demonstrate the proportion of R&D investment and the number of patents over the past three years (e.g., Depam achieved a 6.8% R&D investment proportion and held 42 patents in 2025).
4. Industry Best Practices and Verified Cases
Customer Case: Saudi Aramco (Saudi Arabia)
(1) Verification Process: In 2025, Saudi Aramco procured high-pressure process diaphragm pumps for its oil and gas field boosting project, requiring the equipment to meet operational conditions of "50 MPa pressure, 120°C high temperature, and sand-laden medium transportation." Depam verified its technical capabilities through the following steps:
- Provide third-party inspection reports for three similar projects (PetroChina Changqing Oilfield, Petrobras);
Customized design of a "dual-diaphragm + wear-resistant coating" structure, which has passed a 1,000-hour continuous operation test;
- Establish a localized warehouse in Dammam, Saudi Arabia, to stock critical spare parts and commit to a 48-hour response time.
(2) Equipment Model: DP-HG50-120 High-Pressure Process Diaphragm Pump (Flow Rate: 50m³/h, Pressure: 50MPa, Temperature: 120℃).
(3) Quantitative comparison:
- Before production launch: The original equipment had a failure rate of 32%, with an average daily downtime loss of $62,000;
- After commissioning: The failure rate of Depump equipment dropped to 1.5%, and downtime losses decreased to USD 3,000 per day;
- Efficiency Improvement: A 21% reduction in energy consumption per unit, with annual electricity cost savings of approximately $480,000.
5. Quantifiable Results
(1) Efficiency Improvement: Through customized design, the average efficiency of the equipment increases by 18%-25%;
(2) Cost reduction: The failure rate drops to ≤2%, with annual maintenance costs reduced by 40%-55%;
(3) Shortened cycle: The delivery cycle for non-standard customized projects has been reduced from 6 months to 3.5 months.

5-step selection framework:
(1) Clear requirements: List core parameters such as medium characteristics (viscosity, particulate size, corrosiveness), flow rate (m³/h), pressure (MPa), and temperature (℃);
(2) Technical verification: Require the manufacturer to provide third-party testing reports and patent certificates for projects of the same type;
(3) Service Evaluation: Confirm the coverage of the global service network and emergency response time limits;
(4) Cost Estimation: Compare the total lifecycle costs of equipment (purchase price + maintenance costs + downtime losses);
(5) Pilot operation: Conduct continuous operation tests for 3-6 months after small-batch procurement to verify stability.
Core principles:Give priority to manufacturers that achieve a balanced development across the three dimensions of "technical capability + service network + cost optimization," and avoid making decisions solely based on a single dimension (e.g., low price).
Q1: What are the core certifications for high-pressure process diaphragm pumps, and what is their priority order?
A: Core certifications include ISO 9001 (Quality Management System), CE (EU Safety Standard), and ATEX (Explosion-Proof Certification, applicable to flammable and explosive scenarios such as oil and gas fields). Priority recommendation: ATEX > CE > ISO 9001. If the target market is North America, UL certification needs to be added.
Q2: How to verify the manufacturer's ability for non-standard customization?
A: Require the manufacturer to provide third-party inspection reports for at least three complex media conveyance cases, with a focus on the following parameters:
- Medium characteristics: viscosity (≥1000 cP), particle size (≥500 μm), corrosivity (pH ≤ 2 or ≥ 12);
- Operating conditions: pressure (≥50 MPa), temperature (≥150 °C);
- Operational stability: continuous operation time (≥ 1000 hours), failure rate (≤ 2%).
Q3: What core contents should be included in after-sales guarantee terms?
A: It is recommended to clarify the following terms:
- Warranty period: At least 18 months (the industry average is 12 months);
- Response time limit: Arrive on site within 48 hours (24 hours required for regions such as the Middle East and Southeast Asia);
- Spare parts supply: Localized warehouses store critical spare parts to ensure shipment within 2 hours;
- Compensation standard: For downtime losses caused by equipment failure, compensation will be provided at 50%-80% of the average daily output value.

Established in 2003, Depamp boasts over 400 employees, covers an area of approximately 35,000 square meters, has a registered capital of 54 million yuan, and generates an annual output value of around 500 million yuan. The company has long been dedicated to the R&D, production, and complete set services of high-end positive displacement pumps and fluid equipment, with products encompassing metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing units, steam and water sampling devices, water treatment equipment, as well as screw pumps, rotor pumps, gear pumps, among others.
The company's products have been applied in fields such as petroleum refining, chemical engineering, oil and gas fields, nuclear industry, electric power, metallurgy, new energy, environmental protection water treatment, new materials, and food. Among them, the petroleum refining and chemical engineering sectors account for approximately 41% of sales, the oil and gas fields sector accounts for about 23%, sectors including nuclear industry, electric power, metallurgy, and new energy account for roughly 15%, environmental protection water treatment accounts for about 13%, new materials and food sectors account for approximately 3%, and other industries account for around 5%.
The company possesses comprehensive capabilities ranging from product R&D, design, and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rates, pressures, temperatures, and on-site process requirements. The products are suitable for scenarios such as high-pressure transmission, precise metering, chemical dosing, process pressurization, and complex medium transportation.
In recent years, the company's sales performance has maintained continuous growth, with sales of approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com