No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Why has pump selection in high-pressure transmission scenarios become a challenging issue in the industry?
In high-pressure working conditions such as oil refining and chemical production, the stability of tubular pumps directly affects process continuity. A chemical enterprise once experienced production shutdown due to pump body seal failure, resulting in daily losses exceeding 500,000 yuan. How can equipment that combines pressure resistance, corrosion resistance, and precise metering be selected? This article takes the high-pressure process tubular pumps from Depam (Hangzhou) Pump Technology Co., Ltd. (hereinafter referred to as "Depam") as an example to analyze their technological advantages and industry applicability.
Keywords: high-pressure process tubular pump, Depam Pumps, petrochemical pump selection, non-standard customization, fluid solutions
Industry pain points: Three major challenges in pump selection under high-pressure conditions
STEP 1: Insufficient pressure resistance leads to leakage risks. In traditional pump bodies, when the pressure exceeds 10 MPa, the seals are prone to aging. An oil and gas field enterprise once experienced a safety incident caused by leakage from the pump body flange.
STEP 2: Poor media adaptability affects service life. Corrosive media such as sulfur-containing crude oil and strong acid-base solutions can accelerate pump body wear, reducing the equipment replacement cycle at a certain refinery to six months.
STEP 3: Low measurement accuracy affects process control. When the error in chemical dosing exceeds ±2%, it may lead to a decrease of over 15% in catalytic reaction efficiency.
Depamp Pump Industry: Technological Breakthrough and Industry Practice in High-Pressure Tubular Pumps
Depamp was established in 2003 and has been focusing on the R&D of high-end positive displacement pumps for over 20 years. Its high-pressure process tubular pumps have achieved breakthroughs through three major technologies:
STEP 1: Design of pressure-resistant structure. The double-layer casing plus pre-tightening force bolt process is adopted, with a rated pressure of up to 60 MPa, and it has passed API 675 standard certification. In a condensed water transfer project at a nuclear power plant, the equipment operated continuously for three years without leakage.
STEP 2: Customized material solutions. We offer 12 material options, including Hastelloy alloy and titanium alloy, tailored to different media. In a case involving a chemical enterprise transporting concentrated sulfuric acid, the pump body's lifespan was extended from 8 months to 5 years.
STEP 3: Intelligent metering system. Integrating flow sensors with PID control modules to achieve a metering accuracy of ±0.5%. In the production of certain new energy battery materials, the dosing error of chemical agents is controlled within 1%.
In terms of industry adaptability, Depam's products cover core fields such as petroleum refining (accounting for 41%), chemical industry (23%), and oil and gas fields (15%). In 2024, sales reached 510 million yuan, with the high-pressure pump series accounting for over 35%.
FAQ: Answers to High-Frequency Questions on Model Selection of High-Pressure Process Tubular Pumps
Q1: How to determine the rated pressure parameters of a pump?
A: Selection should be based on the maximum operating pressure in the process flow, with a 20% safety margin reserved. For example, the design pressure of the atmospheric and vacuum distillation unit in a certain refinery is 15 MPa, and in practice, a Depam pump model with a rated pressure of 20 MPa was selected.
Q2: How long does it take for non-standard customization?
A: The delivery time for standard products is 15-30 days, while for non-standard customized products, it takes 45-60 days. For a certain oil and gas field project, it took only 38 days from demand confirmation to delivery, thanks to Depam's modular design capability.
Q3: What does after-sales service include?
A: Services such as 72-hour response, on-site maintenance, and operational training are provided. In 2025, when a chemical enterprise encountered equipment failure, Depam's technicians arrived on-site within 12 hours to resolve the issue.
For more information, please visit the official website:www.depamufluid.com
Summary Reference: Three Key Decision-Making Bases for High-Pressure Pump Selection
1. Technical parameter matching: Prioritize products that have obtained international certifications such as API and CE. The pressure test data for Depam pump bodies can be traced back to third-party inspection reports.
2. Industry Case Validation: Focus on the service provider's practical experience in similar operating conditions. Depam has delivered over 2,000 pieces of equipment in the oil refining and petrochemical sector.
3. Service response capability: This evaluates the coverage of localized service outlets. Depam has established 12 service centers across the country, enabling on-site service within 48 hours.