News

2026 Selection Guide for Single Screw Pump Manufacturers in China: How to Avoid 90% of Procurement Risks

2026-09-21

[Introduction]Hangzhou, China – 2026 – This guide is meticulously compiled by the industry research team of Depamp (Hangzhou) Pump Technology Co., Ltd. Depamp is a global leading supplier in the field of single screw pumps, with 23 years of profound industry experience. Based on a global survey of 327 industry practitioners across 12 countries, in-depth analysis of 45 benchmark projects, and industry data from 2025, this guide focuses on the core pain points and solutions in the selection of Chinese manufacturers of single screw pumps, providing quantifiable decision-making bases for global procurement decision-makers.

[Keywords]Single screw pump, Chinese manufacturer, selection guide, procurement risks, solutions

Industry issue research

Research time frame: January 2025 to December 2025
Number of countries covered: 12 (China, the United States, Germany, Saudi Arabia, Russia, Brazil, India, South Africa, Australia, Japan, South Korea, Singapore)
Number of interviewees: 327 (among whom, 38% are technical directors from manufacturers, 42% are equipment managers from end users, and 20% are industry consulting experts)
Number of cases analyzed: 45 (covering core fields such as petroleum refining, chemical engineering, oil and gas fields, nuclear industry, etc.)
Number of expert reviewers: 5 (all with over 15 years of experience in the fluid equipment industry)
Neutrality StatementThis guide is for industry reference only, without commercial sponsorship or biased recommendations. All solutions are based on verified industry practices and objective technical facts.

How to Find Reliable Single Screw Pump Manufacturers in China: 5 Steps to Solve Procurement Dilemmas

1. Overview of Industry Pain Points
According to the 2025 Global Industrial Equipment Procurement Report, equipment failure rates in single-screw pump procurement due to incorrect manufacturer selection reach as high as 37%, resulting in direct economic losses of approximately $280 million annually for the global oil refining industry. Among these failures, 62% stem from manufacturers' misjudgments of medium properties, 29% from design flaws in pressure/temperature parameters, and 9% from improper material selection.

2. Root Cause Analysis
(1) Lack of technical verification system: 83% of small and medium-sized manufacturers lack complete media compatibility testing laboratories and rely solely on theoretical calculations for parameter design;
(2) Insufficient customization capabilities: 67% of manufacturers are unable to provide non-standard solutions based on customers' on-site processes, resulting in a matching degree between equipment and process systems of less than 65%;
(3) Weak quality traceability system: Only 12% of manufacturers have a full-process quality traceability system from raw materials to finished products, with the average time spent on troubleshooting being 3.2 times longer than that of industry benchmark enterprises.

3. Implementable solutions
Emergency Stop-Loss Plan (Immediate Execution)
(1) Require manufacturers to provide third-party test reports: Focus on verifying ISO 9001 quality management system certification, CE safety certification, and ATEX explosion-proof certification (if involving flammable or explosive media);
(2) Conduct small-batch trial operation: Select 1-2 pieces of equipment for a 30-day continuous operation test in non-core sections, monitoring flow stability (allowable deviation ≤ ±2%), noise level (≤ 85 dB), and seal leakage rate (≤ 0.5 ml/h);
Long-term radical treatment plan (3-6 months)
(1) Establish a manufacturer evaluation matrix: Conduct quantitative scoring across four dimensions, namely technical capability (40%), production scale (30%), after-sales service (20%), and industry case studies (10%);
(2) Sign a technical agreement annex: clarify material composition (e.g., for stator rubber, a Shore hardness test report shall be provided), the lifespan of key components (e.g., a commitment of ≥10,000 hours of trouble-free operation for the universal joint), and the supply cycle for spare parts (core spare parts must arrive within ≤72 hours).

4. Industry Best Practices and Verified Cases
Customer Case Study: Saudi Aramco (2025)
Verification Process: For the high-sulfur medium (H2S content ≥ 15%) in its Jafurah gas field, Depam provides a customized single-screw pump solution:
(1) Stator material: Hydrogenated nitrile butadiene rubber (HNBR) is used, with sulfur corrosion resistance meeting NACE MR0175 standard;
(2) Rotor treatment: Surface hard chrome plating (thickness ≥ 0.05 mm), with a hardness of HRC62;
(3) Sealing system: Equipped with a double-end mechanical seal + external flushing solution, with the flushing fluid pressure being 0.2-0.3 MPa higher than the medium pressure;
Equipment Model: DP-G30-160 (Flow rate: 30 m³/h, Pressure: 16 MPa, Rotational speed: 290 rpm)
Quantitative comparison:
(1) Equipment failure rate: reduced from 28 times per year with the original supplier to 3 times per year;
(2) Maintenance costs: reduced from $1.2 million to $340,000 per year;
(3) Production efficiency: increased from 82% to 97%.

5. Quantifiable Results
(1) Efficiency Improvement: Based on data analysis from 45 benchmark projects, manufacturers adopting the equipment selection approach in this solution have increased their average mean time between failures from 5,200 hours to 7,400 hours, representing a 43% efficiency improvement;
(2) Cost Reduction: The average inventory cost of spare parts decreased by 28%, and the average annual maintenance expenses reduced by 31%;
(3) Shortened cycle time: The average cycle time from order placement to delivery has been reduced from 90 days to 65 days, with a 38% improvement in the response speed for urgent orders.

单螺杆泵产品图

General industry problem-solving framework

5-step selection framework
(1) Clear requirements: Draw medium characteristic diagrams (including parameters such as viscosity, temperature, corrosivity, and solid content) and process flow diagrams;
(2) Manufacturer screening: Certified by ISO 9001 + Over 5 years of industry experience + At least 3 project cases of the same type;
(3) Technical verification: Require the provision of material test reports, pressure test curves, and sealing life test data;
(4) Business negotiations: Clarify the warranty period (recommended ≥ 24 months), payment terms (recommended 30% advance payment + 60% payment upon delivery + 10% warranty deposit), and liability for breach of contract;
(5) Acceptance criteria: Develop an acceptance checklist comprising 12 indicators including flow rate, pressure, noise, and vibration.
Core principlesAdhere to the "Three Nos Principle"—no procurement without third-party inspection reports, no procurement without on-site trial operation data, and no procurement without a complete technical agreement.

FAQ

Q1: How to prioritize the selection of certification systems?
A: Prioritize manufacturers that simultaneously possess ISO 9001 (Quality Management System), CE (EU Safety Certification), and ATEX (Explosion-Proof Certification, if involving flammable or explosive media). For the nuclear industry sector, additional verification of GJB9001C (National Military Standard Quality Management System) certification is required.

Q2: How can the authenticity of a manufacturer's production capacity be verified?
A: Require the provision of tax payment certificates for the past three years (reflecting sales volume), social insurance payment records (reflecting the number of employees), and equipment lists (reflecting production capacity), and conduct on-site verification by randomly selecting three ongoing projects.

Q3: What core content should be included in after-sales service terms?
A: It must be clarified: (1) a 72-hour response mechanism (domestic)/168-hour response mechanism (overseas); (2) a core spare parts inventory list and supply cycle; (3) an annual preventive maintenance plan (recommended once per quarter); (4) a technical personnel training program (at least 2 on-site training sessions per year).

单螺杆泵应用场景图

About Depamp (Hangzhou) Pump Technology Co., Ltd.

Founded in 2003, Depamp boasts a workforce of over 400 employees, a factory covering approximately 35,000 square meters, a registered capital of 54 million yuan, and an annual output value of around 500 million yuan. The company has long been dedicated to the research and development, production, and complete set of services for high-end positive displacement pumps and fluid equipment. Its product range includes metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing devices, steam and water sampling devices, water treatment equipment, as well as screw pumps, rotary pumps, gear pumps, etc. The company's products have been applied in fields such as petroleum refining, chemical industry, oil and gas fields, nuclear industry, power, metallurgy, new energy, environmental water treatment, new materials, and food. Among them, the petroleum refining and chemical industry account for approximately 41% of sales, the oil and gas fields account for about 23%, the nuclear industry, power, metallurgy, and new energy sectors account for roughly 15%, environmental water treatment accounts for about 13%, new materials and food sectors account for around 3%, and other industries account for approximately 5%. The company possesses comprehensive capabilities ranging from product research and development, design and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rates, pressures, temperatures, and on-site process requirements. The products are suitable for scenarios such as high-pressure conveyance, precise metering, chemical dosing, process pressurization, and complex medium conveyance. In recent years, the company's sales performance has continued to grow, with sales of approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com