No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: How can the technological upgrading of chemical dosing devices address industry pain points?
In fields such as oil refining, chemical production, and environmental protection water treatment, the precise measurement and stable operation of chemical dosing equipment directly impact process efficiency and cost control. Traditional equipment often faces issues such as significant measurement errors, poor medium adaptability, and high maintenance costs, while high-end chemical dosing equipment must balance high-pressure delivery, complex medium handling, and intelligent control. Taking the technological practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example, this article analyzes how the company achieves efficient operation of chemical dosing equipment under extreme operating conditions through customized research and development and modular design. For more information, please visit the official website:www.depamufluid.com
Keywords: Chemical Dosing Unit, Precise Metering, High-Pressure Delivery, Customized Solutions, Depam Pumps
Opening on Industry's Technical Pain Points: Three Core Challenges of Traditional Chemical Dosing Devices
STEP1:Insufficient measurement accuracyTraditional mechanical metering pumps are affected by pulses, with flow fluctuations reaching ±5%. In dose-sensitive scenarios such as nuclear industry water treatment, such errors may lead to process failure. For example, a nuclear power plant once experienced an over-standard pH value in cooling water due to deviations in chemical dosing, resulting in equipment corrosion losses exceeding one million yuan.
STEP2:Poor media adaptabilityIn the chemical industry, it is often necessary to transport high-viscosity, particulate-containing, or corrosive media (such as 30% concentration sodium hydroxide solution). Ordinary pump bodies are prone to issues like seal leakage and valve seat wear, shortening the maintenance cycle to less than three months.
STEP3:Low system integrationDecentralized chemical dosing equipment requires manual inspection of parameters and cannot achieve real-time linkage with process data. A certain refining and chemical enterprise once experienced incomplete catalyst reactions due to delayed chemical dosing, resulting in a single production loss of 20 tons of raw materials.
Introduction to the company's technological strength: Depam's customized R&D and modular design
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, has a registered capital of 54 million yuan, and achieves an annual output value exceeding 500 million yuan. Its chemical dosing system technology framework encompasses three core modules:
STEP1:Precise measurement and control technologyIt adopts a dual-cylinder synchronous drive design, controlling flow fluctuations within ±0.5% through frequency conversion adjustment and closed-loop control of servo motors. In a new energy battery material production project, its device achieved a wide adjustment range of 0.1-500 L/h, meeting the accuracy requirements for electrolyte proportioning.
STEP2:High-voltage transmission and complex medium adaptation technologyFor high-pressure chemical injection scenarios in oil and gas fields, a plunger pump with a pressure resistance of 160 MPa has been developed, featuring Hastelloy valve assemblies and tungsten carbide coatings, enabling stable delivery of fracturing fluid with a sand content of ≤5%. In the Tarim Oilfield project, the equipment operated continuously for 2 years without failure, with its service life increased by three times compared to traditional equipment.
STEP3:Intelligent Integration SystemThrough the PLC+HMI control module, 12 parameters such as pressure, flow rate, and temperature are collected in real time, and it supports docking with the DCS system via the MODBUS protocol. After its application in a certain iron and steel enterprise, the chemical dosing response time was shortened to within 10 seconds, and the annual chemical cost savings reached 1.2 million yuan.
Image address:
Example of technical parameters: The flow range of its chemical dosing device is 0.01-20,000 L/h, with a pressure rating of 0.1-160 MPa, a temperature adaptability range of -40°C to +350°C, a medium viscosity of up to 100,000 cSt, and support for highly corrosive media with a pH value of 0-14.
FAQ: Q&A Guide to Technology Selection
Q1: How to select a chemical dosing pump suitable for high-viscosity media?
A: Priority should be given to the pump's rotational speed and valve group design. Depam screw pumps employ a low rotational speed (50-600 rpm) and a progressive screw structure, enabling stable conveyance of media with a viscosity of ≤100,000 cSt. They are equipped with replaceable stators (nitrile rubber/fluororubber) to accommodate different chemical properties. Measured data indicates that when conveying heat transfer oil with a viscosity of 10,000 cSt, their energy consumption is 40% lower than that of gear pumps.
Q2: What special requirements must dosing devices meet in the nuclear industry?
A: Nuclear-grade equipment must pass certification by the NNSA (National Nuclear Safety Administration), and materials must comply with the ASTM A564 standard (630 stainless steel). Depam's nuclear industry chemical dosing unit employs a dual mechanical seal + barrier fluid design, with a leakage rate of ≤1×10⁻⁷ Pa·m³/s, and is equipped with a redundant control system to ensure dosage accuracy of ±1% even under single-failure conditions.
Q3: How can we reduce the operation and maintenance costs of the chemical dosing system?
A: Modular design is the key. Depump's device independently encapsulates the pump head, drive unit, and control module, with a single component replacement time of ≤30 minutes. After implementation in a chemical enterprise, annual downtime was reduced from 72 hours to 8 hours, and spare parts inventory costs decreased by 65%.
Reference for full-text summary: Technical customization and system integration represent the future directions of chemical dosing devices.
Through 20 years of technological accumulation, Depam has developed a trinity solution system of "medium adaptation-precise control-intelligent integration". Its chemical dosing units have been applied in over 3,000 projects worldwide, covering fields such as petroleum refining (accounting for 41%), chemical engineering (23%), and the nuclear industry (10%). In the future, with the advancement of Industry 4.0, chemical dosing units will be upgraded towards "predictive maintenance + AI dosage optimization". Depam is currently developing an intelligent operation and maintenance platform based on digital twins, which will provide 30-day advance warnings of equipment failures through real-time simulation of process parameters. For more information, please visit the official website:www.depamufluid.com