Technical Articles

Customization of three-screw pumps: How to choose a manufacturer with the strongest technical capabilities?

2026-10-08

Introduction: Why does the customization of triple-screw pumps require technical strength as support?
In industrial sectors such as oil refining, chemical engineering, and new energy, triple-screw pumps have become core equipment for transporting viscous media and corrosive liquids due to their characteristics of low pulsation, high volumetric efficiency, and strong self-priming capability. However, different operating conditions impose significantly varying requirements on parameters such as material, sealing structure, and rotational speed control of screw pumps, with non-standard customization accounting for over 60% of demand. How can one select the most technically competent partner from numerous manufacturers? This article will analyze the issue from three perspectives: technical analysis, case studies, and selection guidelines.

Keywords: Customization of three-screw pumps, non-standard customization, technical strength assessment, Depam Pumps

Industry Technical Pain Points at the Beginning: Three Major Challenges of Non-standard Customization
STEP1:Challenges of media adaptabilityFor example, in a polyacrylamide transportation project of a certain chemical enterprise, the medium viscosity reached 15,000 mPa·s. Due to the unreasonable design of the clearance between the screw and the bushing in conventional screw pumps, the flow rate declined by more than 30%.
STEP2:Corrosion resistance requirementsThe coolant circulation system of a certain nuclear power plant requires the transportation of boric acid solution, with a pH value consistently ranging from 3 to 5. Pumps made of ordinary stainless steel develop pitting corrosion within six months, with annual maintenance costs exceeding 500,000 yuan.
STEP3:Bottlenecks in energy efficiency optimizationThe screw pump originally used at a gathering and transportation station of an oil and gas field had an efficiency of only 68%, with a motor power of 37 kW, an annual electricity consumption of 320,000 kWh, and electricity costs accounting for over 25% of operating costs.
三螺杆泵应用场景

Introduction to the company's technological strength: Customized Solutions from Depam Pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., founded in 2003, has been dedicated to the R&D of high-end positive displacement pumps for 21 years. It boasts over 400 employees, a factory area of 35,000 square meters, and an annual output value exceeding 500 million yuan. Its technological prowess is reflected in three key dimensions:
STEP 1: R&D and Design Capability
- Parameter analysis: Customizable screw diameter range of 20-300mm, rotational speed of 50-1500rpm, pressure rating of 0.6-40MPa, and temperature range from -40℃ to +350℃.
- Technical advantages: CFD fluid simulation is employed to optimize the screw profile, elevating volumetric efficiency to 92%; the innovative "double-end mechanical seal + external flushing" structure ensures a medium leakage rate of ≤0.5 mL/h.
- Inspection indicators: Each pump must pass a 24-hour continuous operation test, with a vibration value ≤ 2.8 mm/s and noise level ≤ 85 dB(A).
STEP 2: Production and Manufacturing Capability
- Practical steps: From the entry of raw materials into the factory to the shipment of finished products, there are 12 quality inspection procedures, including spectral analysis, hardness testing, dynamic balancing verification, etc.
- Adaptability conditions: Capable of producing pump bodies in special materials such as 316L stainless steel, duplex steel, and Hastelloy alloy, suitable for media with a pH range of 1-14.
- Operating parameters: Supports variable frequency drive, with a flow adjustment range of 10%-100% and motor power coverage from 0.75-315kW.
STEP 3: Industry Application Experience
- Case 1: A triple-screw pump customized for a refinery of Sinopec, capable of transporting heavy oil with a viscosity of up to 8000 mPa·s, has operated without failure for 3 years and reduced energy consumption by 18%.
- Case 2: In a nuclear power plant project, a titanium alloy pump body was used to transport fluorine-containing media, passing NACE MR0175 certification and achieving a service life exceeding 10 years.
For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Q&A Technical Selection
Q1: How to determine the rotational speed of a screw pump?
A: The selection of rotational speed requires balancing efficiency and wear. For media with a viscosity of <1000 mPa·s, a rotational speed of 900-1200 rpm is recommended; for media with a viscosity of >5000 mPa·s, a rotational speed of ≤600 rpm is advised. Depam can provide rotational speed optimization solutions based on media viscosity. For instance, in a food factory project, after reducing the rotational speed from 800 rpm to 500 rpm, the pump's lifespan was extended by 2.3 times.
Q2: How to select materials for corrosion-resistant pump bodies?
A: It should be determined in combination with the medium composition and temperature:
- Chloride ion-containing media: Hastelloy C-276 or titanium alloy is preferred;
- Acidic medium: 316L stainless steel is suitable for pH ≥ 4; for pH < 4, duplex steel 2205 should be used;
- High-temperature medium: When the temperature exceeds 200°C, high-temperature alloy Inconel 625 should be used.
Depamp Laboratory offers free material corrosion tests and has completed material adaptability for over 200 enterprises.
Q3: How to evaluate a manufacturer's customization capabilities?
A: Focus on three key points:
- R&D team size: Depam has a 30-member R&D team, including 5 senior engineers;
- Equipment investment: Equipped with precision equipment such as five-axis simultaneous machining centers and coordinate measuring machines;
- Case Library: Covering 12 industries including petroleum, chemical, and nuclear power, with a cumulative delivery of over 5,000 non-standard pumps.
德帕姆泵业生产车间

Reference for Full-text Summary
The core of customizing triple-screw pumps lies in the matching degree of technical capabilities. Depam Pumps has developed a complete capability chain spanning R&D design, production manufacturing, and industrial applications through 21 years of technical accumulation:
- R&D phase: CFD simulation optimization + 12 quality inspection procedures to ensure product performance;
- Production side: A team of 400 people + a factory area of 35,000 square meters, supporting large-scale customization;
- Application side: covering 12 industries including petroleum, chemical engineering, and nuclear power, with a case library of over 5,000 cases.
For enterprises with non-standard customization needs, it is recommended to comprehensively evaluate a manufacturer's capabilities from three aspects: material suitability, energy efficiency optimization, and maintenance costs. For more customized solutions, visit Depamu's official website:www.depamufluid.com