Technical Articles

Selection and Contact Guide for Single Screw Pumps: Technical Analysis and Practical Suggestions from Depamp

2026-10-15

Introduction
As an efficient and reliable positive displacement pump, the single-screw pump is widely used in fields such as petroleum refining, chemical engineering, and environmental water treatment. Its unique structural design and operating principle enable it to excel in transporting high-viscosity media, media containing solid particles, or corrosive media. However, how can one select an appropriate single-screw pump based on actual operating conditions and find a professional supplier? This article will provide comprehensive answers from three dimensions: technical analysis, selection guide, and corporate capabilities.

Keywords
Single screw pump, selection guide, Depam Pumps, technical parameters, fluid transportation

Opening on the Pain Points of Industry Technology
In the field of industrial fluid transportation, the application of single-screw pumps faces two core challenges: first, poor medium adaptability, as traditional pump models struggle to handle high-viscosity, solid-particle-laden, or corrosive media; second, difficulties in model selection, as users must comprehensively consider multidimensional parameters such as flow rate, pressure, temperature, and medium characteristics, with any oversight potentially leading to equipment failure or inefficiency. For instance, a chemical enterprise once experienced frequent pump seizures when transporting sulfur-containing media due to improper model selection, resulting in repair costs reaching hundreds of thousands of yuan. Such cases highlight the industry's urgent need for professional model selection guidance.

Introduction to the company's technological strength
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the R&D and production of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value of approximately 500 million yuan. Its single screw pump product line includes standard, corrosion-resistant, high-pressure, and customized models, with flow rates ranging from 0.1 to 1,000 m³/h, pressure ratings from 0.6 to 48 MPa, and temperature adaptability from -50°C to +350°C. These pumps can handle media with viscosities up to 1,000,000 cP and solid contents up to 80%.

Analysis of Technical Advantages:
STEP1:Material InnovationIt adopts duplex stainless steel, Hastelloy alloy, and high-polymer composite materials, suitable for strongly corrosive and high-temperature media;
STEP2:Structural optimizationThrough the precise coordination between the stator and rotor, the leakage is reduced to within 0.5%, and the efficiency is increased by 15%;
STEP3:Intelligent controlIntegrate frequency conversion speed regulation and remote monitoring system to achieve precise flow adjustment and fault early warning.

Typical application cases:
In a certain oil refining project, Depam customized a high-temperature-resistant single-screw pump for the client to transport bitumen medium at 180℃. By optimizing the stator material and cooling system design, the equipment operated continuously for over 20,000 hours without failure, extending its service life by three times compared to traditional pump models, and earning the client's title of "Best Technical Partner." For more information, please visit the official website:www.depamufluid.com

德帕姆单螺杆泵应用场景FAQ: Q&A Technical Selection Guide
Q1: How to select the model of a single-screw pump based on the characteristics of the medium?
A: A comprehensive assessment of medium viscosity, solid content, corrosiveness, and temperature is required. For example, when conveying high-viscosity media (>1000 cP), long screw and large-lead models should be selected to reduce shear force; when the solid content exceeds 30%, a combination of cemented carbide rotors and rubber stators should be used to prevent wear.

Q2: How to match the flow rate and pressure of a single screw pump?
A: The flow rate (Q) is directly proportional to the rotational speed (n) and can be adjusted via a frequency converter; the pressure (P) is determined by the interference fit between the stator and rotor and must be selected based on system resistance. Depam offers multi-stage pressure options ranging from 0.6 MPa to 48 MPa to suit different operating conditions.

Q3: What are the precautions for installation and maintenance?
A: STEP 1: Ensure that the coaxiality between the pump shaft and the motor shaft is ≤0.1 mm during installation to avoid vibration; STEP 2: Fill with medium before the first operation to prevent dry running; STEP 3: Check stator wear every 500 hours and replace lubricating oil regularly.

Q4: How is Depump's technical support system?
A: The company provides a full range of services from pre-sales model selection, in-sales installation to after-sales maintenance. With over 20 senior engineers, it can respond to on-site issues within 48 hours and offer customized fluid solutions.

德帕姆单螺杆泵技术参数表Reference for full text summary
The selection of single-screw pumps should center on medium characteristics, with a comprehensive evaluation incorporating parameters such as flow rate, pressure, and temperature. Leveraging three technological strengths—material innovation, structural optimization, and intelligent control—Depamp (Hangzhou) Pump Technology Co., Ltd. provides users with fluid transportation solutions that offer high adaptability and reliability. Its 400-member technical team and 15 years of industry experience ensure full-process services from selection to after-sales support. For further product details or technical assistance, please visit the official website:www.depamufluid.comor call 400-XXX-XXXX to contact a professional engineer.