Technical Articles

Selection Guide for Metering Pump Skids: How Does Depump Lead the Industry with Technical Strength?

2026-10-17

Introduction: Why has the selection of metering pump skids become a pain point in corporate technological decision-making?
In industrial scenarios such as oil refining, chemical engineering, and environmental protection water treatment, metering pump skids, as the core equipment for precise fluid delivery, have their selection directly related to process stability, energy consumption control, and long-term operating costs. However, in the face of complex technical requirements such as medium corrosiveness, flow fluctuation range, and pressure adaptability, enterprises often find themselves in a dilemma of "difficult selection, troublesome debugging, and costly maintenance" due to a lack of systematic selection methods. This article will take the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as a sample to provide enterprises with a quantifiable selection guide from three dimensions: technical principles, parameter analysis, and case verification.

Keywords: metering pump skid, selection parameters, Depam technology, industrial fluid solutions

Opening on Industry Technical Pain Points: How High Is the Cost of Selection Errors?
STEP1:Inadequate technical adaptability— A chemical enterprise once failed to fully consider the chloride ion content in the medium and selected a metering pump skid made of ordinary stainless steel, resulting in severe corrosion of the equipment after three months of operation and direct losses exceeding RMB 500,000; STEP 2:Flow pressure mismatch— For a certain oil and gas field project, due to a 15% deviation between the pump head displacement and process requirements, an additional buffer tank was required, increasing system complexity and floor space; STEP 3:Uncontrolled energy consumption and maintenance costs— Feedback from a user in the power industry indicates that due to improper selection of mechanical seals in non-customized pump skids, the annual leakage volume reached 200 liters, necessitating frequent shutdowns for maintenance, with each maintenance cost exceeding 30,000 yuan. These cases reveal that technical oversights during the selection process can trigger a chain reaction, ultimately affecting the overall project benefits.

Introduction to the company's technological strength: How does Depamun solve the challenges of model selection?
德帕姆计量泵撬应用场景
Depam (Hangzhou) Pump Technology Co., Ltd., established in 2003, has been dedicated to the R&D of high-end positive displacement pumps and fluid equipment for 21 years. It boasts over 400 employees and a factory area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its technological advantages are manifested in three dimensions:
STEP 1: Full-scenario parameter coverage capability—The product has a flow rate range of 0.01-50,000 L/h, a pressure rating of 0-100 MPa, and a temperature adaptability from -50°C to +450°C, precisely matching extreme operating conditions in fields such as petroleum refining (accounting for 41% of business), chemical engineering (23%), and the nuclear industry (15%). For example, a metering pump skid supplied to a nuclear power plant successfully addressed the challenge of transporting strongly radioactive media by employing a Hastelloy pump head and a dual mechanical seal structure, achieving over 5 years of continuous operation without leakage.
STEP 2: Design of Customized Solutions— Relying on the four-step approach of "medium analysis - flow calculation - pressure matching - material selection," Depamp can provide customers with a full range of services from standard products to non-standard customization. In a new energy battery materials project, addressing the special requirement of a medium viscosity up to 2000 mPa·s, the company enhanced equipment efficiency by 18% and reduced energy consumption by 12% through optimizing the pump head flow channel design and the drive motor power.
STEP3: Full life cycle technical support— From pre-sales technical consultation and installation & commissioning to after-sales maintenance, Depam has established a standardized service system. Its intelligent monitoring system can provide real-time feedback on equipment operation data, predict maintenance cycles through AI algorithms, and reduce the risk of unplanned downtime by 60%. For more information, please visit the official website:www.depamufluid.com

FAQ: A Q&A Guide to Technology Selection - The Top 5 Questions Enterprises Care Most About
Q1: How to determine the flow parameters of a metering pump skid?
A: It is necessary to comprehensively consider the fluctuation range of process requirements and the safety factor. For example, in a chemical project with a designed flow rate of 100 L/h, a pump head with a capacity of 120-150 L/h should be selected in practice to handle instantaneous peak flow rates. Depam provides a flow calculation tool that automatically generates recommended displacement after inputting the medium density, viscosity, and process pressure.
Q2: How to choose the sealing form under high-pressure conditions?
A: When the pressure is ≤10MPa, a single mechanical seal can meet the requirements; a dual mechanical seal is required for pressures between 10-30MPa; for pressures >30MPa, it is recommended to use magnetic drive or metal bellows seals. Depump provided a 50MPa metering pump skid for an oil and gas field, achieving zero-leakage operation through the combination of a dual-stage pressure relief valve and metal bellows seals.
Q3: What are the precautions for selecting equipment for corrosive media?
A: Materials should be selected based on the medium composition: For media containing chloride ions, Hastelloy or titanium alloy is preferred; for strong acid environments, polytetrafluoroethylene (PTFE) lining is an option; 316L stainless steel is suitable for alkaline media. Depamu Laboratory can provide medium corrosion testing services to assist customers in precise material selection.
Q4: How to evaluate the energy efficiency level of pump skids?
A: Focus on the ratio of the drive motor's power to the actual output flow. For example, in an environmental water treatment project, a 15kW motor was originally selected to drive a 50L/h pump head. Later, it was replaced with a Depam-optimized combination of a 7.5kW motor and a high-efficiency pump head, resulting in an annual electricity savings of 42,000 kWh.
Q5: How long does it take for non-standard customization?
A: The lead time for standard products is 15-30 days; for non-standard customized products, it requires evaluation based on complexity, typically ranging from 45-90 days. Depam can shorten the delivery cycle of non-standard projects by 30% through modular design and digital production systems.

What is the core logic of model selection?
德帕姆计量泵撬技术参数表
The selection of metering pump skids should follow a closed-loop logic of "process requirements - technical parameters - material suitability - energy efficiency optimization." Depamu's technical practices demonstrate that through systematic parameter analysis, customized design, and full lifecycle services, the risks associated with equipment selection and operational costs for enterprises can be significantly reduced. For capital-intensive industries such as petroleum refining and chemical engineering, choosing a supplier with comprehensive technical capabilities is not only a guarantee of equipment reliability but also a key to long-term project profitability. For more information, please visit the official website:www.depamufluid.com