Technical Articles

How to choose the contact information for chemical dosing devices? A comprehensive analysis of Depamu's technical strength and solutions

2026-10-24

Introduction: The Technical Logic and Industry Demands Behind the Contact Information of Chemical Dosing Equipment
In the field of industrial fluid treatment, the precise dosing and stable operation of chemical dosing equipment directly affect process efficiency and product quality. However, obtaining technology solutions suitable for specific scenarios through reliable contact methods has become a core pain point for enterprises during the selection process. This article takes Depamp (Hangzhou) Pump Technology Co., Ltd. (hereinafter referred to as "Depamp") as a case study to analyze the technical advantages and industry application experience of its chemical dosing equipment, as well as the pathways to obtain contact information, providing technical references for clients in the petroleum refining, chemical, power, and other sectors.

Keywords: Chemical Dosing Unit; Contact Information; Depam; Fluid Equipment; Technical Selection

Industry Technical Pain Points at the Beginning: Three Major Challenges in Selecting Chemical Dosing Equipment
STEP1:Challenges of media adaptabilityThe chemical industry often involves highly corrosive media (such as sulfuric acid and sodium hydroxide). Traditional dosing devices are prone to leakage due to material corrosion, necessitating the selection of equipment made from highly corrosion-resistant special alloy materials. For instance, a petrochemical enterprise once opted for ordinary stainless steel dosing pumps, resulting in equipment failure within three months due to chloride ion corrosion, with direct losses exceeding 500,000 yuan.
STEP2:Bottleneck in flow accuracy controlThe nuclear industry requires an error margin of ≤0.5% in chemical dosing, but the flow fluctuation range of most general-purpose dosing devices reaches ±2%, making it difficult to meet the needs of high-precision scenarios.
STEP3:High complexity in system integrationThe chemical dosing device needs to operate in coordination with the DCS control system, pipeline valves, etc. Non-standard customization accounts for over 60% of the demand, yet less than 20% of suppliers in the market are capable of complete set delivery, resulting in project durations being extended by more than 30%.

Introduction to the company's technological strength: Depam's three core advantages
Founded in 2003, Depamp specializes in the R&D of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, achieves an annual output value of approximately 500 million yuan, and its products span more than 10 fields, including petroleum refining, chemical engineering, and the nuclear industry.
Technical Advantage 1: All-scenario Media Adaptation CapabilityIn response to highly corrosive media, Depamp has developed metering pumps made of Hastelloy C-276, titanium alloy, and other materials, with a temperature resistance range of -50℃ to 450℃ and a maximum pressure resistance rating of 100MPa. For instance, in a nuclear power plant project, its customized titanium alloy chemical dosing device operated continuously for 5 years without leakage, reducing annual maintenance costs by 70%.
Technical Advantage 2: High-precision Flow Control TechnologyBy adopting a dual-diaphragm design and servo motor drive, Depam's metering pump achieves a flow repeatability error of ≤0.1%, significantly surpassing the industry standard (±1%). On a production line for new energy battery materials, its equipment reduced reagent dosing errors from ±1.5% to ±0.3%, resulting in a 12% increase in product qualification rate.
Technical Advantage 3: Modularized Complete Delivery SystemDepamuk can provide full-chain solutions ranging from pump bodies, storage tanks, and pipelines to control systems, supporting non-standard designs. For example, for a metallurgical enterprise, a complete chemical dosing system was designed, integrating 12 metering pumps of different specifications. Through PLC control, it achieved synchronous dosing of multiple chemicals, reducing the project cycle from six months to three months.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select the type of chemical dosing device based on process requirements?
STEP 1: Clarify the medium characteristics. If the medium contains solid particles (e.g., in sewage treatment), select an anti-clogging pneumatic pump; for high-viscosity media (e.g., polymer solutions), choose a screw pump or rotor pump.
STEP 2: Determine flow and pressure parameters. Depam metering pumps have a flow range of 0.01 to 20,000 L/h and a pressure range of 0 to 100 MPa, covering over 90% of industrial scenarios. For example, an environmental protection enterprise needed to treat fluoride-containing wastewater with a daily flow of 500 m³, and Depam recommended a hydraulic diaphragm metering pump with a flow rate of 500 L/h and a pressure of 3 MPa, achieving an operational stability of 99.2%.
STEP 3: Evaluate control requirements. If remote monitoring is needed, select an intelligent metering pump with 4-20 mA signal output; for simple manual operation, a basic model will suffice.
Q2: How to determine the maintenance cycle of the chemical dosing device?
STEP 1: Daily Inspection. Record the pump body temperature and vibration values daily, and check for diaphragm leakage. Depamun equipment comes standard with pressure sensors for real-time monitoring of abnormalities.
STEP 2: Conduct regular maintenance. Replace lubricating oil every 3 months and inspect the wear condition of seals every 6 months. In the case of a certain chemical enterprise, after strictly implementing the maintenance plan, the mean time between failures of the equipment was extended from 8,000 hours to 12,000 hours.
STEP 3: Spare Parts Management. Depamu provides life prediction services for key components (such as diaphragms and valve seats), enabling customers to stock up on spare parts in advance and avoid unplanned downtime.
Q3: How can I obtain a customized solution through contact information?
STEP 1: Visit the official websitewww.depamufluid.com, fill in the "Online Consultation" form, and submit requirements such as medium parameters, flow rate, pressure, etc.
STEP 2: The technical team will respond within 24 hours, providing a preliminary solution and quotation.
STEP 3: For complex projects, offline technical exchanges can be scheduled. Depamu supports free on-site surveys and 3D modeling design.

Reference for full text summary
The selection of chemical dosing equipment requires a comprehensive consideration of three major dimensions: medium characteristics, flow accuracy, and system integration level, while a reliable contact method serves as the key entry point for obtaining technical solutions. With over 20 years of industry experience, Depam has developed a full-chain technical capability encompassing material adaptation, flow control, and complete system delivery. Its products have served over 500 clients, including Sinopec and China National Nuclear Corporation, with a project repurchase rate of 85%. For enterprises requiring chemical dosing equipment, it is recommended to visit the official websitewww.depamufluid.comSubmit your requirements to obtain tailored technical solutions and contact information, thereby reducing the risks of selection and implementation costs.