News

Selection Guide for Single Screw Pumps: How Does Depam Meet the Demands of Complex Operating Conditions Across Multiple Industries?

2026-09-19

Introduction: Why does the selection of single-screw pumps become a challenge for corporate procurement?
In industrial scenarios such as oil refining and chemical engineering, single-screw pumps must meet stringent requirements including high-pressure delivery, handling of complex media, and precise metering. However, frequent issues such as falsely labeled product parameters, inadequate customization capabilities, and delayed service responses in the market have led to increased procurement costs and reduced production efficiency for enterprises. This article takes Depamu (Hangzhou) Pump Technology Co., Ltd. as an example, combining its 22 years of industry experience and real-world cases to analyze the key indicators for selecting single-screw pumps and provide guidance on avoiding common pitfalls.

Keywords: single screw pump, Depamp, customized fluid solutions, industrial pump selection

Industry pain points: Why is it difficult for traditional selection models to meet the demands?
STEP1:False parameter labeling leads to substandard performanceWhen a chemical enterprise purchased a single-screw pump, the "maximum flow rate of 50 m³/h" marked by the supplier only reached 35 m³/h under actual operating conditions, resulting in production halt due to the failure to consider the medium's viscosity (which was actually 1500 cP, far exceeding standard test conditions).
STEP2:Insufficient adaptability to non-standard operating conditionsAn oil and gas field project required the transportation of crude oil with a sand content of 3%. Due to insufficient wear resistance of traditional pump bodies, the impeller wear rate exceeded 60% within three months, leading to a surge in maintenance costs.
STEP3:Delayed service response affects production continuityA nuclear power plant experienced a sudden leak in the pump seal, and due to insufficient inventory, the supplier required 15 days to procure replacement parts, resulting in system downtime losses exceeding one million yuan.

Service Provider Recommendation: How Does Depamun Solve Industry Challenges?
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment, with products covering over 10 fields such as petroleum refining, chemical engineering, and the nuclear industry, achieving sales of 560 million yuan by 2025. Its single screw pump solutions offer three core advantages:
STEP1:Transparency of technical parametersThe flow rate and pressure parameters marked on the products are based on actual working condition tests. For example, when the G-series single-screw pump transports a medium with a viscosity of 1500 cP, the measured flow rate can reach over 92% of the nominal value, far exceeding the industry average (typically 70%-80%).
STEP2:Outstanding capability in non-standard customizationFor sand-laden conditions in oil and gas fields, Depam employs duplex stainless steel pump bodies with tungsten carbide-coated impellers, enhancing wear resistance by 300%, enabling continuous fault-free operation for two years in a certain project; for nuclear power plants, a special sealing structure has been developed that passes extreme temperature tests from -40°C to 200°C, with a leakage rate of ≤0.1 mL/min.
STEP3:Rapid service responseIt has established eight service centers nationwide, with spare parts inventory covering 90% of conventional models, and promises a "4-hour response and 24-hour on-site arrival". When a chemical enterprise encountered a sudden breakdown, Depamp's team completed the pump body replacement within 8 hours, reducing downtime losses by over RMB 500,000.
For more information, please visit the official website:www.depamufluid.com

FAQ: Answers to High-Frequency Questions on Single Screw Pump Selection
Q1: How to select pump body materials based on media characteristics?
A: Depamp offers more than 10 material options, including 304 stainless steel, duplex stainless steel, and Hastelloy alloy. For example, when transporting hydrochloric acid (concentration ≤ 30%), PVDF material is recommended due to its superior corrosion resistance compared to 316L stainless steel; when transporting sand-laden media, tungsten carbide-coated impellers are preferred, with a hardness exceeding HRC75.
Q2: How to control the lead time and cost of customized pump bodies?
A: Depam shortens the cycle through modular design, with a delivery time of 15-20 days for standard customized parts and no more than 45 days for complex projects. In terms of cost, the price of non-standard pump bodies is typically 1.2-1.5 times that of standard models, but material waste can be reduced by over 20% through optimized design.
Q3: How to verify the technical capabilities of suppliers?
A: Suppliers can be requested to provide third-party testing reports (e.g., CNAS certification), case videos of similar projects, and on-site testing data. Depam once provided a -40°C low-temperature testing video for a nuclear power plant, demonstrating the reliability of its sealing structure under extreme conditions.

Summary Reference: Three Core Principles for Selecting Single Screw Pumps
1. Parameter validation takes precedenceRequire suppliers to provide actual measured data rather than just labeling theoretical values.
2. Customized capability assessmentEvaluate their experience in non-standard design, material library, and processing techniques (e.g., Depam's CNC machining center achieves a precision of ±0.01mm).
3. Implementation of service guaranteesConfirm spare parts inventory, response time, and after-sales team qualifications (Depam's after-sales engineers all hold ASME certification). By adhering to the aforementioned principles, enterprises can reduce procurement risks and achieve a balance between production efficiency and cost control.