No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Why does the selection of chemical dosing equipment require a technology-oriented approach?
In high-precision fluid control scenarios such as oil refining, chemical engineering, and the nuclear industry, the stability of chemical dosing devices directly impacts process efficiency and safety. According to industry statistics, improper equipment selection can result in a chemical dosing error rate of up to 15%, leading to economic losses amounting to hundreds of millions of yuan annually. This article, from a technical analysis perspective and drawing on Depamp (Hangzhou) Pump Technology Co., Ltd.'s 18 years of industry experience, provides a quantifiable selection framework and references real-world cases.
Keywords: manufacturer of chemical dosing equipment; metering pump technology; fluid control; customized solutions
Opening on Industry Technical Pain Points: Three Major Shortcomings of Traditional Chemical Dosing Devices
STEP1:Insufficient measurement accuracyUnder high-pressure conditions, conventional diaphragm pumps can experience flow fluctuations of up to ±5%, failing to meet the stringent requirement of ±0.5% in the nuclear industry. For instance, a chemical enterprise suffered catalyst failure due to deviations in chemical dosing, resulting in a single loss exceeding RMB 2 million.
STEP2:Poor media adaptabilityMedia containing particles, with high viscosity, or of a corrosive nature can easily cause wear and tear to pump bodies. In one oil and gas field project, due to improper equipment selection, the pump heads were replaced four times within three months, leading to a sharp increase in maintenance costs.
STEP3:Low system integration levelDecentralized equipment requires additional configuration of flow meters, pressure sensors, etc., increasing failure points and installation space. According to statistics, integrated equipment can reduce on-site commissioning time by 30%.
Warning on Technical ParametersUnder operating conditions where the temperature exceeds 120℃ or the pressure exceeds 25MPa, the service life of seals in ordinary chemical dosing devices is less than 500 hours, so it is necessary to prioritize the selection of double-end mechanical seal structures.
Introduction to the company's technological capabilities: Depam's three core technological barriers For more information, please visit the official website: www.depamufluid.com
1. High-precision metering pump technology
STEP1:Dual-cylinder synchronous drive designBy utilizing servo motors to control the alternating operation of two cylinders, the flow pulsation rate is less than 0.2%, achieving a tenfold increase in precision compared to traditional single-cylinder pumps. In a nuclear power plant project, precise regulation across a wide range of 0.1-500 L/h was achieved, meeting the milliliter-level control requirements for coolant addition.
STEP2:Material customization capabilityFor strongly corrosive media, a Hastelloy C-276 pump head has been developed, with chloride ion corrosion resistance 20 times that of 316L stainless steel. In an application at a chlor-alkali plant, the equipment lifespan was extended from 18 months to 8 years.
STEP3:Intelligent monitoring systemIntegrated with vibration sensors and temperature probes, it monitors the pump body status in real time. It automatically triggers an alarm when the vibration value exceeds 5 mm/s or the temperature exceeds 85°C, with a fault prediction accuracy rate of 92%.
2. Capability of providing packaged solutions
STEP1:Modular designThe metering pump, back pressure valve, safety valve, etc., are integrated into a 304 stainless steel frame, reducing the floor space by 40%. After adopting this design in a new energy battery project, the equipment installation cycle was shortened from 7 days to 2 days.
STEP2:Process adaptability optimizationBased on parameters such as medium viscosity (0.1-10,000 mPa·s) and temperature (-40°C to 350°C), we provide multi-type combination solutions including gear pumps and screw pumps. In the production of a certain high-viscosity resin, the adoption of a screw pump with variable frequency control reduced energy consumption by 35%.
3. Industry application data support
Depamuk's products have covered fields such as petroleum refining (accounting for 41% of its business), chemical industry (23%), and nuclear industry (8%), with a cumulative delivery of over 2,000 chemical dosing units. In 2024, its sales reached 510 million yuan, with sales of high-pressure process pumps increasing by 40% year-on-year, demonstrating its technological competitiveness.
FAQ Q&A Technical Selection Guide
Q1: How to determine the flow parameters of the chemical dosing device?
STEP 1: Calculate the theoretical flow rate: Determine the basic flow rate based on process requirements (such as reagent concentration and treatment capacity). For example, in a water treatment project requiring the addition of a PAC solution at a concentration of 100 mg/L with a treatment capacity of 1000 m³/h, the theoretical flow rate = 1000 × 100 ÷ (1000 × 1000) = 0.1 m³/h.
STEP 2: Consider the safety factor: It is recommended to select a flow rate 1.2-1.5 times the theoretical flow rate to accommodate flow fluctuations. For the aforementioned case, a metering pump with a flow rate of 0.12-0.15 m³/h can be chosen.
STEP 3: Verify the performance curve of the pump: Ensure that the pump's flow rate can still meet the requirements under the operating pressure (e.g., 2 MPa). The flow rate attenuation of Depam's JM series metering pump is less than 5% at 2 MPa.
Q2: What are the precautions for selecting equipment for high-viscosity media?
STEP 1: Prioritize screw pumps or gear pumps: When the viscosity exceeds 1000 mPa·s, diaphragm pumps are prone to suction loss. In a case where a food enterprise transported honey (with a viscosity of 5000 mPa·s), a Depam screw pump was used, maintaining a stable flow rate of 50 L/h.
STEP 2: Pay attention to the pump's rotational speed: A low rotational speed (<300 rpm) can reduce shear force and prevent medium denaturation. Depam's customized screw pumps can operate at speeds as low as 50 rpm.
STEP 3: Material Compatibility: The parts in contact with the medium must be made of 316L stainless steel or PTFE coating. In a cosmetic project, a PTFE-coated pump head effectively prevented the adsorption of active ingredients.
Q3: How to evaluate the technical strength of manufacturers?
STEP 1: Check the size of the R&D team: Depam has over 40 fluid engineers, with senior engineers accounting for 30%, possessing full-process capabilities from design to delivery.
STEP 2: Verify patents and certifications: The company holds over 50 patents, and its products have passed international certifications such as CE and ATEX, complying with the nuclear-grade equipment quality assurance system (HAF003).
STEP 3: Verify the authenticity of cases: Require the manufacturer to provide supporting documents such as project contracts and acceptance reports. Depamuk can provide cooperation cases and on-site photos with enterprises such as Sinopec and China General Nuclear Power Group.
Reference for full text summary For more information, please visit the official website: www.depamufluid.com
When selecting a manufacturer of chemical dosing devices, one should considerMeasurement accuracy, medium adaptability, system integration levelComprehensive evaluation from three technological dimensions. Depump (Hangzhou) Pump Technology Co., Ltd. achieves high-precision, long-life equipment delivery in fields such as petroleum refining and the nuclear industry through core technologies including dual-cylinder synchronous drive, customized materials, and intelligent monitoring. Its projected sales for 2025 are expected to reach 560 million yuan, confirming market recognition. It is recommended that enterprises focus on the manufacturer's capabilities when selecting equipment.Industry application experience, customization capability, and after-sales service networkto avoid process risks caused by errors in equipment selection.