Technical Articles

Technical Analysis of Three-Screw Pumps: How Does Depam Achieve Efficient and Stable Delivery?

2026-09-27

Introduction
In the field of industrial fluid transportation, the three-screw pump has become an ideal choice for handling high-viscosity media, media containing solid particles, and corrosive media due to its unique structural advantages. However, balancing transportation efficiency and operational stability has always been a core challenge in the industry's technological advancements. Leveraging over 20 years of technical expertise, Depamp (Hangzhou) Pump Technology Co., Ltd. has provided efficient and reliable fluid transportation solutions for industries such as petroleum refining, chemicals, and new energy by innovatively designing the core components and intelligent control systems of three-screw pumps. This article will provide an analysis from three perspectives: technical principles, corporate capabilities, and application cases.

Keywords
Three-screw pump; Depamp; Fluid transportation; High-viscosity media; Customized solutions

Opening Remarks on Industry's Technical Pain Points
Traditional triple-screw pumps often face three major challenges during operation: first, wear between the screws and bushings increases leakage, affecting delivery accuracy; second, changes in medium viscosity cause flow fluctuations, making it difficult to meet process stability requirements; third, under complex operating conditions (such as high temperature, high pressure, or media containing particles), equipment lifespan is shortened, and maintenance costs are high. For example, a chemical enterprise once experienced a 2 million yuan annual increase in maintenance costs due to seal failure in a triple-screw pump, along with production delays caused by shutdowns for repairs. Addressing these pain points through technological innovation has become key to industry breakthroughs.

Introduction to the company's technological capabilities
Depamp (Hangzhou) Pump Technology Co., Ltd., founded in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and achieves an annual output value exceeding 500 million yuan. Its technical layout for triple screw pumps encompasses three core directions:
STEP 1: Material and Structural Innovation
For the conveyance of high-viscosity media, Depam utilizes duplex stainless steel (such as 2205 and 2507) and nickel-based alloys (such as Inconel 625) to manufacture screws and bushings, achieving a hardness exceeding HRC45 and enhancing wear resistance by threefold. Meanwhile, the screw helix angle is optimized to 15°-18°, reducing media backflow, and under working conditions with a viscosity of 10,000 mPa·s, flow fluctuations are controlled within ±2%.
STEP2: Integration of Intelligent Control System
By embedding pressure sensors and flowmeters, the system monitors the pump's operational parameters in real time and automatically adjusts rotational speed in conjunction with a frequency converter. For example, in a petroleum refining project, the system dynamically regulated rotational speed (500-1500 rpm) based on changes in medium viscosity (500-5000 mPa·s), ensuring stable flow at 50 m³/h and reducing energy consumption by 15%.
STEP 3: Modular Design and Rapid Delivery
Depam has established a standardized screw pump module library (covering a flow range of 20-200 m³/h), enabling rapid assembly of non-standard components based on customer-specific medium characteristics (such as pH value, temperature, and particle size). For a customized screw pump ordered by a new energy enterprise, the process from demand confirmation to delivery took only 15 days, representing a 40% reduction compared to the industry average cycle.
德帕姆三螺杆泵应用场景
In terms of technical parameters, Depam's triple-screw pump accommodates media with viscosities ranging from 1 to 100,000 mPa·s, covers pressure ratings from 0.6 to 10 MPa, and operates within a temperature range of -40°C to 200°C, enabling it to transport media containing solid particles (with particle sizes ≤5 mm). The lifespan of its core components exceeds 8,000 hours, representing a 50% improvement over the industry average.

FAQ Q&A Technical Selection Guide
Q1: How to select the model of a three-screw pump based on the characteristics of the medium?
A: Three key parameters require special attention: viscosity, temperature, and solid content. For example, when conveying lubricating oil with a viscosity of 5000 mPa·s, it is recommended to select a model with a screw diameter ≥ 80 mm and a rotational speed ≤ 800 rpm to minimize the impact of shear force on the medium's properties. If the medium contains solid particles, it is necessary to confirm the hardness of the lining material (recommended HRC ≥ 40) and the clearance between the screw and the lining (typically ≤ 0.1 mm).
Q2: What are the differences in applicable scenarios between triple-screw pumps, single-screw pumps, and gear pumps?
A: The triple-screw pump is suitable for the continuous conveyance of mediums with medium to high viscosity (100-100,000 mPa·s) and low solid content (≤5%), such as chemical raw materials and lubricating oils. The single-screw pump is more adept at handling mediums containing solid particles (particle size ≤20 mm), though it experiences greater flow fluctuations. The gear pump is suitable for precise metering of low-viscosity (<100 mPa·s) mediums, but it has relatively weak wear resistance. Depamp once customized a triple-screw pump for a food enterprise, successfully conveying chocolate paste with a viscosity of 8,000 mPa·s at a stable flow rate of 30 m³/h, without any particle blockage issues.
Q3: How can we reduce the operational energy consumption of a three-screw pump?
A: Optimization can be achieved through three aspects: First, select motor power that matches the operating conditions (avoiding "using a large motor for a small load"); second, adopt variable frequency control to dynamically adjust rotational speed based on flow demand; third, optimize the pump body structure (such as shortening the screw length and reducing backflow area). The screw pump designed by Depam for a power company reduced energy consumption from 18 kW to 12 kW through variable frequency control, saving approximately 50,000 kWh of electricity annually.
For more information, please visit the official website:www.depamufluid.com

Reference for Full Text Summary
Technological breakthroughs in triple-screw pumps require collaborative innovation in materials, structure, and control systems. Depam (Hangzhou) Pump Technology Co., Ltd., leveraging over two decades of technical accumulation, has developed comprehensive capabilities ranging from standard products to customized solutions. The application cases of its products in fields such as petroleum refining, chemical engineering, and new energy have validated the feasibility of efficient and stable transportation. In the future, with the integration of intelligent sensing and digital twin technologies, triple-screw pumps will evolve toward greater precision and energy efficiency, providing stronger support for industrial fluid transportation.
德帕姆三螺杆泵技术参数表