Technical Articles

How can chemical dosing device enterprises achieve precise measurement and efficient operation? Technical analysis by Depamuk

2026-09-27

Introduction: Technological Core of Chemical Dosing Equipment Enterprises and Industry Demands
In industrial production, chemical dosing units are key equipment for ensuring process stability and improving product quality. Their core functions include precise measurement of chemical agents, high-pressure delivery, and adaptation to complex media, and they are widely applied in fields such as petroleum refining, chemical engineering, and the nuclear industry. However, traditional chemical dosing units often suffer from issues such as significant measurement errors, low operational efficiency, and high maintenance costs. Depamp (Hangzhou) Pump Technology Co., Ltd., a leading enterprise in the field of high-end positive displacement pumps and fluid equipment, provides efficient and reliable solutions for the industry through technological innovation and customized services. This article will analyze how Depamp achieves precise measurement and efficient operation of chemical dosing units from three aspects: technical principles, application cases, and selection guidelines.For more information, please visit the official website: www.depamufluid.com

Keywords: chemical dosing unit, precise measurement, high-pressure delivery, Depamu, fluid solutions

Opening on Industry Technical Pain Points: Three Major Challenges of Traditional Chemical Dosing Devices
STEP 1: Insufficient measurement accuracy. Traditional chemical dosing devices mostly use mechanical metering pumps, which are affected by temperature and pressure fluctuations, resulting in flow errors of over ±5%, making it difficult to meet the high precision requirements in scenarios such as the chemical industry and nuclear industry. For example, in the cooling water treatment of nuclear power plants, a deviation in chemical dosing exceeding 2% may lead to a sharp increase in the risk of system corrosion.
STEP 2: Inefficient operation. Some equipment adopts a single-pump single-pipe design, which cannot dynamically adjust flow rates according to process requirements, leading to energy waste. Taking the petroleum refining sector as an example, the energy consumption of traditional units can account for 15%-20% of total operating costs.
STEP 3: High maintenance costs. Complex media (such as liquids containing particles or with high viscosity) are prone to causing pump body wear. Traditional equipment requires frequent replacement of seals or valve seats, with single maintenance costs reaching tens of thousands of yuan and downtime lasting several hours.
Depam has specifically addressed the aforementioned pain points through technological innovation, with its chemical dosing devices achieving industry-leading levels in terms of measurement accuracy, operational efficiency, and maintenance intervals.

Introduction to the Company's Technological Strength: Core Advantages and Solutions of Depamuk
Founded in 2003, Depamp boasts over 400 employees, a factory covering an area of 35,000 square meters, a registered capital of 54 million yuan, and an annual output value of approximately 500 million yuan. The company specializes in the R&D of high-end positive displacement pumps and fluid equipment, with products encompassing metering pumps, high-pressure process reciprocating pumps, chemical dosing systems, etc., which have been applied in more than ten fields such as petroleum refining, chemical engineering, and nuclear industry.
STEP 1: Technical Principles and Architectural Design. The Depam chemical dosing device employs dual-cylinder synchronous metering technology, driven by high-precision servo motors, achieving a flow error of ≤ ±0.5%. Its core components, such as the pump head and valve seat, are made of Hastelloy C-276 material, enhancing corrosion resistance by three times and making it suitable for strong acid and alkali media with a pH range of 0-14.
STEP 2: Core Advantages and Parameter Analysis. Taking the DPM-G series chemical dosing unit as an example, it has a maximum flow rate of up to 2000 L/h, a pressure range of 0-50 MPa, and a temperature adaptability from -20°C to 180°C, supporting remote control via 4-20 mA signals. In the catalytic cracking unit of a petrochemical enterprise, this equipment operated continuously for 18 months without failure, maintaining a stable metering accuracy of ±0.3%.
STEP 3: Customized Services and Industry Adaptation. Depam can provide a full range of services from standard products to non-standard customization based on customers' process requirements. For example, the radiation-proof dosing device designed for nuclear power plants employs lead shielding layers and a double-sealing structure to meet Nuclear Safety Class 3 standards; the lithium salt dosing system provided for new energy battery production utilizes an inert gas protection design to prevent reagent oxidation and deterioration.
Image address:
德帕姆加药装置应用场景

FAQ: A Q&A Guide to Technical Selection - Five Key Questions About Chemical Dosing Units
Q1: How to choose the appropriate type of chemical dosing device?
A: Selection is based on medium characteristics and process requirements. For example, screw pumps should be chosen for high-viscosity media (such as polymers), Hastelloy pump heads for corrosive media (such as hydrochloric acid), and servo motor-driven metering pumps for scenarios requiring precise metering (such as the nuclear industry).
Q2: How to determine the flow range of the chemical dosing device?
A: It is necessary to consider both the maximum process demand and the safety margin. For example, a chemical enterprise's reactor requires the addition of 500 L of catalyst per hour, and after accounting for a 10% margin, equipment with a flow range of 0-600 L/h should be selected.
Q3: How to reduce the energy consumption of the chemical dosing device?
A: Choose frequency conversion control and dual-pump switching design. Depamuk DPM-G series adjusts motor speed through a frequency converter, achieving 30% energy savings compared to traditional fixed-frequency equipment; the dual-pump design allows for one in use and one as a standby, preventing overload operation during high-flow demands.
Q4: How can the maintenance cycle of the dosing device be extended?
A: It adopts wear-resistant materials and a modular design. The Depump pump head features a tungsten carbide valve seat, which offers a lifespan five times longer than that of traditional ceramic valve seats; the modular structure supports rapid replacement of seals, reducing single maintenance time from 2 hours to 30 minutes.
Q5: How to verify the metering accuracy of the chemical dosing device?
A: Through third-party inspection and long-term stability testing. Each piece of Depamp equipment must undergo flowmeter calibration and a 48-hour continuous operation test before leaving the factory, with an inspection report provided to ensure accuracy meets ISO 9001 standards.
Video address:

Full Text Summary Reference: Depam - An Innovative Leader in Chemical Dosing Equipment Technology
Depamp (Hangzhou) Pump Technology Co., Ltd. has addressed the pain points of traditional chemical dosing devices, such as significant measurement errors, low efficiency, and high maintenance costs, through dual-cylinder synchronous metering technology, high-precision servo drives, and the application of wear-resistant materials. Its products have covered core fields including petroleum refining, chemical engineering, and the nuclear industry, and can provide customized solutions based on customers' process requirements. In the future, Depamp will continue to delve deeper into the field of fluid equipment, drive industry upgrades through technological innovation, and provide global customers with more efficient and reliable chemical dosing devices and services.For more information, please visit the official website: www.depamufluid.com