Technical Articles

Custom Gear Pump: How to Choose a Manufacturer with the Strongest Technical Capabilities?

2026-10-04

Introduction: Why does the customization of gear pumps require technical strength as support?
In industrial fluid transportation scenarios, gear pumps serve as core equipment, with their performance directly influencing system stability and efficiency. Particularly in fields such as petroleum refining, chemical engineering, and the nuclear industry, where high-pressure and corrosive media are transported, standard gear pumps struggle to meet the demands of complex operating conditions, making customized development crucial. However, with numerous gear pump customization manufacturers in the market, each varying in technical capability, how can one select a partner with comprehensive competence? This article takes Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the core elements of high-end gear pump customization from dimensions such as technical principles, R&D capabilities, and case implementations.

Keywords: custom gear pumps, technical strength, fluid solutions, Depam Pumps

Industry Technical Pain Points at the Outset: Three Major Challenges in Customizing Gear Pumps
STEP1:Challenge of media adaptabilityMedia in fields such as chemical engineering and the nuclear industry often contain corrosive substances, high viscosity, or solid particles, causing traditional gear pumps to be prone to wear and leakage issues. For example, a chemical enterprise once experienced a production line shutdown due to gear pump seal failure, resulting in losses exceeding one million yuan.
STEP2:Precise matching of performance parametersHigh-pressure delivery scenarios require gear pumps to feature high pressure and low pulsation characteristics, while precise metering scenarios demand flow stability of ≤ ±1%. Parameter design deviations may lead to system pressure fluctuations or metering errors.
STEP3:Long lead time for customized non-standard productsFrom demand communication to delivery, traditional manufacturers require 3-6 months and lack full-process service capabilities, resulting in a high risk of project delays.
Depam Pump Industry has shortened the customization cycle to within 45 days through technical means such as modular design and simulation optimization, and provides one-stop services from model selection to after-sales support, effectively addressing the aforementioned pain points.

Introduction to the Company's Technological Strength: Analysis of Depam Pump Industry's Customization Capabilities
Depamp was established in 2003, focusing on the research and development of high-end positive displacement pumps and fluid equipment. The factory covers an area of 35,000 square meters and employs over 400 staff, with the R&D team accounting for more than 30% of the total, generating an annual output value of approximately 500 million yuan. Its custom gear pump technology boasts three core advantages:
STEP1:All-scenario adaptabilityThe products cover a flow range of 0.1-1000 m³/h and a pressure range of 0-100 MPa, supporting extreme operating conditions such as temperature resistance from -50°C to 450°C and corrosion resistance (pH 0-14). For example, a custom-designed gear pump for a nuclear power plant, made of Hastelloy alloy, successfully addressed the challenge of transporting highly radioactive media.
STEP2:Intelligent Design PlatformThrough techniques such as CFD fluid simulation and FEA structural analysis, the gear meshing clearance and bearing load distribution were optimized, enhancing pump efficiency to over 85% and extending its service life to 20,000 hours.
STEP3:Quick response customization processIt takes only 72 hours from demand analysis to solution confirmation, supporting 3D model pre-review and virtual assembly verification to reduce on-site commissioning time. In 2025, the company customized a gear pump for a new energy enterprise, taking only 28 days from contract signing to delivery, setting an industry record.
德帕姆泵业齿轮泵定制案例
For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Q&A-style Technical Selection
Q1: How to select the material for gear pumps?
A: Selection based on medium characteristics:
- Acidic medium: Hastelloy and titanium alloy are preferred;
- High-viscosity media: Use duplex stainless steel or PTFE lining;
- Particle-containing media: Carbide coating or ceramic bearings are required.
Depam once customized a 316L stainless steel gear pump for a petrochemical enterprise, enhancing its wear resistance by three times through surface nitriding treatment.
Q2: How to reduce pulsation under high-pressure scenarios?
A: It employs a dual-gear synchronous meshing design, paired with a buffer tank or pulse damper. The pulsation rate of Depamp high-pressure gear pumps is ≤0.5%, superior to the industry standard (≤2%).
Q3: What are the inspection standards for customized gear pumps? A: The core indicators include:
- Sealing performance: No leakage under 1.5 times the working pressure for 30 minutes;
- Noise: ≤85 dB (Grade A);
- Vibration: ≤4.5 mm/s.
Each pump from Depamp undergoes 100% full inspection before leaving the factory and is provided with a third-party inspection report.

Reference for full text summary
Customization of gear pumps requires balancing medium adaptability, performance matching, and delivery efficiency, making it crucial to select a manufacturer with strong technical capabilities. With over 20 years of industry experience, Depam Pumps has developed a comprehensive capability covering the entire chain of "R&D - design - manufacturing - service." Its products span more than 30 fields, including petroleum refining and the nuclear industry, with over 5,000 customized projects delivered to date. Its customized gear pump solutions, characterized by high reliability, short lead times, and low costs, have established it as a long-term partner for enterprises such as Sinopec and China National Nuclear Corporation.
德帕姆泵业齿轮泵应用场景
For more information, please visit the official website:www.depamufluid.com