Technical Articles

Customization of High-Pressure Process Tubular Pumps: How Does Depamun Overcome Industry Challenges with Technical Strength?

2026-10-04

Introduction: The Technological Breakthrough Battle in High-Voltage Transmission Scenarios
In the fields of petroleum refining, chemical engineering, and new energy, high-pressure process tubular pumps must simultaneously meet stringent requirements such as corrosion resistance, high-precision metering, and long-term stable operation. Traditional standard pumps often lead to process interruptions or even safety incidents due to issues such as poor medium adaptability and significant pressure fluctuations. Leveraging over 20 years of experience in fluid equipment R&D, Depamp (Hangzhou) Pump Technology Co., Ltd. provides comprehensive solutions for all scenarios within the pressure range of 10MPa to 100MPa through modular design, customized materials, and intelligent control technologies, helping clients achieve over 30% improvement in process efficiency. For more information, please visit our official website:www.depamufluid.com

Keywords: high-pressure process tubular pump, customized fluid solutions, Depam's technical strength

Introduction to Industry Technical Pain Points: Three Major Technical Bottlenecks in High-Voltage Transmission
STEP1:Challenge of medium adaptabilityIn the chemical industry, customers often need to transport highly corrosive media such as chloride ions and hydrogen sulfide. Traditional 316L stainless steel pump bodies are prone to stress corrosion cracking under high-pressure environments. A refining and chemical enterprise once experienced pump body corrosion leading to leakage, resulting in a single production shutdown loss exceeding 2 million yuan.
STEP2:Insufficient pressure control accuracyThe nuclear industry requires a chemical dosing error of ≤0.5%, but traditional mechanical regulating pumps can experience a flow deviation of up to 15% after three months of operation due to valve group wear, seriously affecting reactor safety.
STEP3:The contradiction between energy efficiency and reliabilityIn the oil and gas field gathering and transportation scenario, pumps need to operate continuously within a wide temperature range from -40°C to 80°C. Traditional sealing structures are prone to failure at high temperatures, shortening the maintenance cycle to 15 days per session and causing a surge in operational costs.
高压过程管式泵应用场景

Introduction to the company's technological strength: Depam's three major technological moats
STEP1:Material customization systemThe company has established a materials database covering 12 types of special materials, including Hastelloy C-276 and duplex steel 2205, and verified the corrosion resistance of these materials through an electrochemical corrosion test bench (with a test cycle of up to 10,000 hours). For a boric acid transfer pump customized for a certain nuclear power plant, 904L super austenitic stainless steel was used, extending the pump body's lifespan from 3 years to 8 years.
STEP2:Intelligent control technologyThe independently developed DPC-3000 intelligent control system integrates pressure sensors (with a precision of Class 0.1), flowmeters (with a rangeability ratio of 100:1), and frequency converters to achieve closed-loop flow control. In a new energy battery material project, the system reduced dosing errors from ±2% to ±0.3%, saving over 500,000 yuan in annual raw material costs.
STEP3:Modular design platformThrough 3D modeling and finite element analysis, the pump body is decomposed into six major modules, including the pump head, drive end, and sealing system, enabling rapid reconfiguration. For the sand-containing medium conditions in a certain oil and gas field, the modular replacement of the carbide bushing and wear-resistant ring was completed within 72 hours, increasing the MTBF (Mean Time Between Failures) from 2,000 hours to 5,000 hours.
Technical Parameter Matrix:
- Pressure range: 10-100 MPa (extendable to 150 MPa)
- Flow range: 0.1-2000 L/h (accuracy ±0.5%)
- Temperature range: -50°C to 200°C
- Applicable media: pH value 0-14, solid content ≤ 15%
德帕姆高压过程管式泵技术参数

FAQ Q&A Technical Selection Guide
Q1: How to select pump body materials?
A: It is necessary to comprehensively consider three factors: medium composition, temperature, and pressure. For example, when transporting hydrochloric acid below 60°C, Hastelloy C-276 is preferred; if the medium contains chloride ions and the temperature exceeds 80°C, titanium alloy TA2 should be used. Depamu offers free medium analysis services and issues material selection reports within 72 hours.
Q2: How to ensure sealing reliability under high-pressure conditions?
A: A dual mechanical seal with flushing plan is adopted. For operating conditions at 100 MPa, an API 682 standard Plan 53A barrier fluid system is configured, with the pressure in the seal chamber controlled at 1.1-1.2 times the medium pressure. After application in a certain refining and chemical project, the seal replacement cycle was extended from 3 months to 18 months.
Q3: What is the lead time for customized pumps?
A: Standard products are shipped within 7 days, while non-standard products are delivered within 15-30 days. The company boasts a 35,000㎡ intelligent factory equipped with CNC machining centers, coordinate measuring machines, and other equipment, achieving an 85% automation rate in key processes and ensuring an on-time delivery rate of ≥98%.

Value Creation in the Era of Technological Customization
The customization of high-pressure process tubular pumps involves not only changes in product form but also a profound integration of technological systems and process requirements. Depam has established a solution repository covering 12 industries, including petroleum refining, nuclear industry, and new energy, through three technological pillars: materials science, intelligent control, and modular design. By 2025, the company’s R&D investment accounted for 6.8% of its revenue, with 87 patents and participation in formulating four national standards, such as GB/T 30079-2013 "Metering Pumps." Driven by the "dual carbon" goals, Depam is accelerating its expansion into emerging fields such as hydrogen energy transportation and carbon capture, leveraging technological innovation to help clients achieve process upgrades and cost optimization. For more information, please visit the official website:www.depamufluid.com