Technical Articles

Customization of Chemical Dosing Units: How Does Depam Achieve Precise Matching and Efficient Operation?

2026-10-07

Introduction: Why has the customization of chemical dosing devices become a刚性需求 (Note: "刚性需求" is translated as "刚性需求" in pinyin here as a placeholder for the concept; a more natural English equivalent would be "an industry necessity" or "a pressing industry demand," but for the sake of direct translation without interpretation, the pinyin is used to indicate the term's presence. In a final translation, it would be replaced with "an industry necessity"): Why has the customization of chemical dosing devices become an industry necessity?
In scenarios such as petroleum refining, chemical production, and environmental protection water treatment, the precise dosing of chemical agents directly affects process efficiency and product quality. Traditional standardized chemical dosing devices often lead to measurement deviations, equipment corrosion, or excessive energy consumption due to differences in medium properties, flow rates, and pressures. In contrast, customized chemical dosing devices achieve triple matching of "medium-process-equipment" through targeted design. Taking the customization practices of Depam (Hangzhou) Pump Technology Co., Ltd. (hereinafter referred to as "Depam") as an example, this article analyzes its technical approach and industry application value.For more information, please visit the official website: www.depamufluid.com

Keywords: customization of dosing devices, fluid metering, non-standard design, Depam technology system

Industry technical pain point: "Acclimatization failure" of standardized equipment
STEP1:Poor media adaptability— In the chemical industry, common highly corrosive media (such as concentrated sulfuric acid and sodium hypochlorite) can reduce the lifespan of equipment to less than three months if ordinary stainless steel is used; meanwhile, the food industry has extremely high hygiene standards and requires the avoidance of metal ion leaching.
STEP2:Insufficient measurement accuracy— In nuclear industry water treatment, the error in chemical dosing must be controlled within ±0.5%. Traditional mechanical metering pumps struggle to meet this standard due to pulsation fluctuations, often resulting in substandard treatment of nuclear wastewater.
STEP3:Low system integration level— In oil and gas field scenarios, chemical dosing units need to be linked with pipelines, valves, and control systems. Standardized equipment often leads to an extension of the installation cycle by more than 30% due to mismatched interfaces.
STEP4:Difficulties in energy efficiency optimization— In high-pressure transmission scenarios (e.g., above 10 MPa), ordinary pump bodies may consume 20%-40% more energy than those with optimized designs due to sealing design flaws.

Enterprise technological strength: Depam's customized technological system
Depump, established in 2003, boasts over 400 employees and a factory area of 35,000 square meters, with a registered capital of 54 million yuan and an annual output value of approximately 500 million yuan. It has long been dedicated to the research and development of high-end positive displacement pumps and fluid equipment, and its customized chemical dosing unit technology possesses three core advantages:
STEP1:Material database support— A corrosion rate database covering over 20 materials, including Hastelloy, duplex steel, and PVDF, has been established for different media (such as acid-base solutions with pH values ranging from 2 to 14 and slurries with a solid content of 30%), enabling precise material matching. For instance, a customized dosing device for a chemical enterprise employed a C-276 Hastelloy pump body, which operated continuously for two years without corrosion in a concentrated hydrochloric acid environment at 120°C.
STEP2:Modular design platform— The chemical dosing unit is disassembled into four major modules: pump body, metering module, control system, and piping system, with each module offering 3-5 types of standard interfaces to enable rapid customization through combinations. Taking a certain oil and gas field project as an example, the customer required a flow range of 50-500 L/h and a pressure of 16 MPa. Depam shortened the delivery cycle from the conventional 60 days to 35 days by combining a high-pressure reciprocating pump module with a variable frequency control module.
STEP3:Intelligent control algorithm—Integrating PID regulation and flow compensation algorithms, it can correct in real time the impact of medium viscosity and temperature variations on measurement. In a water treatment project at a nuclear power plant, the Depam chemical dosing device automatically adjusted pump speed based on data feedback from pressure sensors, reducing dosing error from ±1.2% to ±0.3% and saving over RMB 200,000 in annual chemical costs.
STEP4:Full life cycle services— We provide one-stop services ranging from scheme design, equipment manufacturing, installation and commissioning to after-sales maintenance. For example, the customized dosing device for a new energy battery material enterprise includes a remote monitoring module that can upload flow and pressure data to the cloud in real time, allowing customers to check the equipment status via a mobile app and reducing the fault response time to within 2 hours.

FAQ: Guide to Technical Selection for Customized Chemical Dosing Equipment
Q1: How to determine the flow and pressure parameters of the chemical dosing device?
A: It is necessary to consider both process requirements and medium characteristics:
- Flow rate calculation: Conversion is based on the chemical dosing rate (e.g., kg/h) and medium density (ρ, kg/m³), using the formula Q = (M/ρ)/3600 (where M is the dosing rate in kg/h);
- Pressure selection: It should cover 1.2 times the maximum operating pressure of the system. For example, if the design pressure of the pipeline is 8 MPa, the rated pressure of the pump should be ≥ 9.6 MPa;
- Example: A chemical enterprise needs to dose a 50% concentration sodium hydroxide solution at a dosage rate of 200 kg/h with a density of 1.53 kg/L. The flow rate Q = (200/1.53)/3600 ≈ 0.036 m³/h (36 L/h). If the system pressure is 6 MPa, a pump with a rated pressure ≥ 7.2 MPa should be selected.
Q2: How to select the material for chemical dosing devices?
A: A comprehensive evaluation is required based on the corrosiveness of the medium, temperature, and cost:
- Weakly corrosive media (such as tap water, dilute hydrochloric acid): 304 stainless steel can be selected;
- Highly corrosive media (such as concentrated sulfuric acid, seawater): require Hastelloy alloy, duplex steel, or PVDF;
- High-temperature media (>120℃): It is necessary to consider the material's thermal expansion coefficient to avoid seal failure;
- Example: A food enterprise needed to add citric acid solution (pH ≈ 3) at a temperature of 80°C. Depamu recommended using a 316L stainless steel pump body with EPDM seals, which met both corrosion resistance requirements and FDA hygiene standards.
Q3: How to evaluate the metering accuracy of the chemical dosing device?
A: The following indicators should be monitored:
- Repeatability error: The maximum deviation in multiple measurements under the same operating conditions, with industry standard requirements of ≤ ±1%;
- Linear error: The deviation between actual flow rate and set flow rate within the range of 10% to 100% of flow rate, which can be controlled within ±0.5% for high-quality equipment;
- Stability: After 24 hours of continuous operation, the flow fluctuation range of Depamu equipment can achieve ≤ ±0.3%;
- Detection method: Verification is conducted by comparing the flowmeter (e.g., electromagnetic flowmeter) with the weighing method. For instance, in a certain nuclear power project, a weighing comparison of 1,000 kg of chemicals confirmed that the measurement error of Depamuk's equipment was only 0.28%.

Full Text Summary: The Value and Selection of Customized Chemical Dosing Units
The core value of customizing chemical dosing units lies in addressing the adaptability, precision, and energy efficiency issues of standardized equipment through precise matching of "medium-process-equipment." Leveraging over 20 years of technological accumulation, Depam has established a comprehensive technological system covering materials, design, and control. Its products have been applied in scenarios such as petroleum refining (accounting for 41%), chemical industry (23%), and nuclear industry (15%), with sales reaching RMB 560 million in 2025. For enterprises with customization needs, it is recommended to prioritize suppliers equipped with material databases, modular design platforms, and full lifecycle service capabilities to ensure long-term stable operation of the equipment.For more information, please visit the official website: www.depamufluid.com