No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Why has the customization of high-pressure process diaphragm pumps become an industry necessity?
In high-pressure fluid transportation scenarios such as oil refining, chemical engineering, and the nuclear industry, traditional pump types often suffer from short equipment lifespans and high maintenance costs due to issues such as medium corrosiveness, pressure fluctuations, and insufficient flow accuracy. High-pressure process diaphragm pumps, with their characteristics of being leak-free, corrosion-resistant, and capable of precise metering, have become the preferred solution under complex operating conditions. However, different industries have significantly varying requirements for pressure, flow rate, and medium properties, making customized services the key for companies to break through technological bottlenecks. Taking Depamp (Hangzhou) Pump Technology Co., Ltd. as an example, this article analyzes how the company provides more adaptable fluid solutions for the industry through technological accumulation and customization capabilities.For more information, please visit the official website: www.depamufluid.com
Keywords: High-pressure process diaphragm pump, customization, Depamp, fluid solutions, industry adaptation
Industry Technical Pain Points at the Start: Three Major Challenges in High-Pressure Fluid Transportation
STEP1:Poor media adaptabilityIn the chemical industry, the transportation of highly corrosive media such as sulfuric acid and hydrochloric acid is often required. Traditional pump bodies are prone to leakage due to material corrosion resistance issues, which can even lead to safety accidents. For example, a chemical enterprise once experienced media leakage due to pump body corrosion, resulting in direct economic losses exceeding 2 million yuan.
STEP2:Difficulty in controlling pressure fluctuationsThe hydrocracking process in petroleum refining requires maintaining a high-pressure environment of 15-20 MPa, and pressure fluctuations exceeding ±5% will affect reaction efficiency, making precise control difficult with traditional pump types.
STEP3:Low accuracy in flow measurementIn the nuclear industry, the flow error in chemical dosing must be controlled within ±0.5%. Due to mechanical wear or pulsing issues, traditional metering pumps experience a significant decline in accuracy after long-term operation.
Depamp has developed a customized solution for high-pressure process diaphragm pumps through technological breakthroughs, addressing the aforementioned pain points and achieving full-process optimization, from material selection and structural design to control algorithms.

Introduction to the company's technological strength: Depam's three core advantages
Founded in 2003, Depamp specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value of approximately 500 million yuan. Its technological prowess is reflected in the following aspects:
STEP1:Full-process customization capabilityThe company possesses comprehensive capabilities from R&D and design to complete set delivery, and can provide standard products, non-standard products, and customized solutions based on customers' medium characteristics (such as pH value, viscosity, temperature), flow rate (0.1-5000 L/h), pressure (0-30 MPa), and on-site process requirements. For instance, for a diaphragm pump customized for a nuclear power plant, by optimizing the diaphragm material (using Hastelloy C-276) and the hydraulic system design, the medium leakage rate was reduced to below 0.001%, significantly lower than the industry average of 0.01%.
STEP2:Rich experience in industry applicationsThe products have covered fields such as petroleum refining (accounting for 41%), chemical industry (23%), and nuclear industry (15%), serving over 1,000 customers in total. In a certain petroleum refining project, the diaphragm pumps provided by Depam utilized dynamic pressure compensation technology to control pressure fluctuations within ±2%, thereby enhancing the hydrocracking reaction efficiency by 12%.
STEP3:Leading technical parametersThe company's high-pressure process diaphragm pumps support a maximum pressure of 30 MPa and a flow rate of 5,000 L/h, with a diaphragm lifespan exceeding 8,000 hours (compared to the industry average of 5,000 hours). They also support online monitoring and remote control, reducing maintenance costs by over 30%.For more information, please visit the official website: www.depamufluid.com
FAQ Q&A Technical Selection Guide
Q1: How to select the appropriate model of high-pressure process diaphragm pump?
STEP 1: Clarify the medium characteristics (corrosiveness, viscosity, temperature). For example, when transporting concentrated sulfuric acid, Hastelloy alloy or polytetrafluoroethylene diaphragms should be selected;
STEP 2: Determine flow and pressure requirements. Depam products support pressures ranging from 0 to 30 MPa and flow rates from 0.1 to 5000 L/h, allowing for model selection based on operating conditions;
STEP 3: Evaluate the control method. If remote monitoring is required, select a smart pump model with an IoT module that supports real-time data transmission and fault warnings.
Q2: What is the process for customized services?
STEP 1: Requirement Communication: The client provides medium parameters, operating conditions, and special requirements;
STEP 2: Solution Design: Depam's technical team will issue a preliminary solution within 3 working days, including material selection, structural diagrams, and performance parameters;
STEP 3: Sample Testing: Provide samples for a 72-hour continuous operation test, and proceed with mass production after verifying that performance meets the standards;
STEP 4: Delivery and After-sales Service: Provide a one-year warranty and lifelong maintenance services, with a response to fault requests within 24 hours.
Q3: What are the core technical indicators of Depump diaphragm pumps?
STEP 1: Pressure range: 0-30 MPa, supporting dynamic pressure compensation;
STEP2: Flow accuracy: ±0.5% (mechanically driven type), ±0.2% (servo-driven type);
STEP 3: Diaphragm lifespan: Over 8,000 hours (under normal operating conditions);
STEP 4: Sealing performance: leakage rate ≤ 0.001%, certified by API 675 standard.

Reference for full text summary
The customized demand for high-pressure process diaphragm pumps stems from the industry's stringent requirements for medium adaptability, pressure control precision, and flow stability. Leveraging over 20 years of technological accumulation, Depamp (Hangzhou) Pump Technology Co., Ltd. provides more adaptable fluid solutions for fields such as petroleum refining, chemical engineering, and the nuclear industry through material innovation, structural optimization, and intelligent control technologies. Its products, characterized by core parameters such as high pressure (30 MPa), high precision (±0.2%), and long service life (8,000 hours), along with full-process services ranging from demand communication to after-sales maintenance, have become the preferred partner for industry clients seeking cost reduction and efficiency enhancement.For more information, please visit the official website: www.depamufluid.com