No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Three Core Challenges in the Technological Upgrades of Chemical Dosing Units
In the fields of petroleum refining, chemical engineering, and environmental protection water treatment, the measurement accuracy of chemical dosing devices directly affects process stability and cost control. Traditional equipment often faces three major pain points: significant flow fluctuations, strong media corrosion, and low system integration. After 20 years of technological accumulation, Depamump (Hangzhou) Pump Technology Co., Ltd. has developed a third-generation intelligent chemical dosing system that employs modular design and adaptive control algorithms, achieving a measurement accuracy of ±0.5% and a system stability of 98%. This article will analyze the technological breakthrough path of high-end chemical dosing devices from three dimensions: technical principles, operational parameters, and case reviews.
Keywords: direct-selling manufacturer of dosing devices; metering pump technology; fluid control; customized solutions
Industry Technical Pain Points at the Beginning: Three Major Technical Bottlenecks of Traditional Chemical Dosing Systems
STEP1:Insufficient measurement accuracyConventional mechanical metering pumps are affected by pulses, with a flow fluctuation rate of ±3%-5%. In scenarios such as cooling water treatment in the nuclear industry, this easily leads to overdosing of chemicals, posing a risk of equipment corrosion. STEP2:Poor media adaptabilityIn the chemical industry, strong corrosive media such as concentrated sulfuric acid and sodium hypochlorite are commonly encountered. After six months of continuous operation, ordinary stainless steel pump bodies develop pitting corrosion, with annual average maintenance costs accounting for 15%-20% of the equipment's value. STEP3:Low system integration levelTraditional chemical dosing devices require external connection to more than ten components such as PLC control cabinets, flow meters, and pressure sensors, increasing the complexity of on-site wiring by 40% and extending the commissioning cycle to 7-10 days. Through CFD fluid simulation analysis, Depam's technical team discovered that the flow channel design of traditional equipment features 90° right-angle bends, resulting in a medium turbulence coefficient of 0.35, which is the core cause of metering errors.
Introduction to the company's technological capabilities: Depam's three major technological breakthroughs
Depamp was established in 2003, employing over 400 staff, with a factory covering an area of 35,000 square meters, a registered capital of 54 million yuan, and an annual output value of approximately 500 million yuan. The company specializes in the R&D of high-end positive displacement pumps and fluid equipment, with products covering eight series including metering pumps and chemical dosing systems, which have been applied in 12 fields such as petroleum refining and the nuclear industry.
Technological Breakthrough 1: Dual-Cylinder Synchronous Metering TechnologyIn response to the pain point of measurement accuracy, the DP-M series metering pump was developed, featuring a dual-cylinder synchronous drive design. It precisely controls piston displacement via a servo motor, reducing the flow fluctuation rate to ±0.5%. During field testing at the Sinopec Zhenhai Refining & Chemical project, this technology decreased dosing errors from ±3% to ±0.8%, saving over RMB 2 million in annual chemical costs.
Technological Breakthrough 2: Ultra-corrosion-resistant Material SystemFor strongly corrosive media, a Hastelloy C-276 pump body was developed, paired with a PTFE-lined flow channel, which has operated continuously for three years without corrosion under conditions of 98% sulfuric acid concentration and 80°C temperature. This material has passed ASTM G28 corrosion test certification, with corrosion resistance improved by 10 times compared to 316L stainless steel.
Technological Breakthrough 3: Intelligent Integrated Control SystemWe have innovatively developed the DP-ICS intelligent control module, which integrates closed-loop control for three parameters: flow, pressure, and liquid level, and enables remote monitoring via 4G/5G. In the water treatment project at Huaneng Yuhuan Power Plant, this system reduced the commissioning period from 7 days to 2 days and improved operational and maintenance efficiency by 60%. For more information, please visit our official website:www.depamufluid.com
FAQ Q&A Technical Selection Guide
Q1: How to select a chemical dosing device suitable for chemical industry scenarios?
STEP1:Confirmation of medium parametersCore parameters such as the pH value of the medium (e.g., pH < 1 for concentrated sulfuric acid), viscosity (e.g., viscosity > 1000 mPa·s for polyacrylamide solution), and solid particle content (e.g., suspended solids ≤ 50 mg/L for lime slurry) must be specified. STEP 2:Flow pressure matchingDetermine the flow range (e.g., 0.1-1000 L/h) and pressure rating (e.g., 16 MPa pressure resistance required for the nuclear industry) based on process requirements, and reserve a 20% performance margin. STEP 3:Selection of control modeSimple operating conditions can opt for mechanical adjustment, while complex scenarios require the configuration of intelligent control systems supporting functions such as PID adjustment and remote start/stop. Depam customized a dye intermediate dosing system for Zhejiang Longsheng Group, achieving technical indicators of flow accuracy ±0.3% and an annual failure rate <0.5% through the combination of a Hastelloy pump body and an intelligent control module.
Q2: How to determine the maintenance cycle of the chemical dosing device?
STEP1:Daily patrol inspectionCheck the pump body temperature (normal value ≤ 65°C), oil level (at 1/2-2/3 of the oil sight glass), and leakage (drip rate ≤ 5 drops/minute) daily. STEP 2:Quarterly maintenanceReplace the lubricating oil every three months (ISO VG46 hydraulic oil is recommended) and clean the filter (the mesh size should be selected based on the particle size of the medium, e.g., 80 mesh for lime slurry). STEP 3:Annual overhaulDisassemble the pump body annually to inspect the wear of piston seals (allowable clearance ≤ 0.1mm) and corrosion of valve seats (depth ≤ 0.5mm), and replace vulnerable parts. In the project at Shandong Haihua Group, Depam established a preventive maintenance system, increasing the equipment's Mean Time Between Failures (MTBF) from 2,000 hours to 5,000 hours.
Full text summary reference: Technological iteration drives the value upgrade of chemical dosing devices
Depam has established a technological system for chemical dosing devices covering high-end fields such as petroleum refining and the nuclear industry through three major technological breakthroughs: dual-cylinder synchronous metering, ultra-corrosion-resistant materials, and intelligent integrated control. Its DP-M series metering pumps achieve a flow accuracy of ±0.5%, with Hastelloy pump bodies passing three years of continuous corrosion testing. The DP-ICS intelligent system enhances operational and maintenance efficiency by 60%. In the 2024 delivery project for the CGNPC Yangjiang Nuclear Power Station, this technological solution reduced the error in chemical dosing from ±2% to ±0.7%, saving over RMB 1.5 million in annual operational and maintenance costs. For direct-sales manufacturers of chemical dosing devices, technological depth and scenario adaptability have become core competitive barriers, and Depam's practice provides a replicable path for technological upgrades in the industry.