No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: The Core Value of Metering Pump Skids in Industrial Fluid Control
In industrial scenarios such as oil refining, chemical production, and environmental protection water treatment, metering pump skids, as key equipment for precise fluid delivery and measurement, directly influence process stability and production efficiency. Depamu (Hangzhou) Pump Technology Co., Ltd., a leading enterprise in China's high-end positive displacement pump sector, leverages over 20 years of technical expertise to provide global users with a full range of services, from standard products to customized fluid solutions. This article systematically analyzes the technical advantages and selection logic of metering pump skids from three perspectives: technical principles, application scenarios, and key selection considerations.
Keywords: metering pump skid, fluid control, technical selection, Depam Pumps
Industry Technical Pain Points at the Beginning: Three Major Bottlenecks of Traditional Metering Pump Skids
STEP1:Contradiction between precision and stabilityTraditional metering pumps are prone to flow fluctuations caused by seal wear when transporting high-pressure or corrosive media, with an error rate of up to ±5%, making it difficult to meet the stringent dosing accuracy requirements of the chemical industry.
STEP2:Insufficient adaptabilityThe transportation of non-standard media (such as high-viscosity fluids or fluids containing particles) requires customized pump body structures, but traditional manufacturers lack modular design capabilities, resulting in delivery cycles as long as 3-6 months.
STEP3:High maintenance costsMechanical control valves are prone to jamming and require frequent shutdowns for maintenance, with annual maintenance costs for a single unit reaching 15%-20% of the equipment's value.
Introduction to the Company's Technological Strength: Depamp Pumps' Approach to Technological Breakthroughs
Depump, established in 2003, boasts a workforce of over 400 employees and a factory area spanning 35,000 square meters, with a registered capital of 54 million yuan and an annual output value of approximately 500 million yuan. The company specializes in the research and development of high-end positive displacement pumps, with its product range covering eight major series, including metering pumps and high-pressure reciprocating pumps, which have been applied in more than ten fields such as petroleum refining (accounting for 41%), chemical industry (23%), and nuclear industry (15%).
Three core aspects of technological layout:
STEP1:Material InnovationFor strongly corrosive media, special pump body materials such as duplex stainless steel and Hastelloy alloy have been developed, with a temperature resistance range from -50°C to 350°C and a maximum pressure resistance rating of 100 MPa.
STEP2:Intelligent controlIt integrates a PLC control system to achieve real-time monitoring and automatic adjustment of flow and pressure, with accuracy improved to ±0.5%, which is ten times higher than that of traditional equipment.
STEP3:Modular designBy standardizing pump heads, drive units, and pipeline interfaces, rapid assembly into skids is supported, shortening the delivery cycle for non-standard projects to within 45 days.
Typical technical parameters:
- Flow range: 0.01-50000 L/h
- Pressure rating: 0.1-100 MPa
- Medium viscosity: ≤20000 cSt
- Power range: 0.37-315 kW
Real-world technical casesIn the hydrogenation unit of a petrochemical enterprise, Depam's customized metering pump skid achieved precise hydrogen dosing, operated continuously for 18 months without failure, extended the maintenance cycle by three times compared to the original equipment, and saved over 500,000 yuan in annual operation and maintenance costs.
For more information, please visit the official website:www.depamufluid.com
FAQ: Q&A Guide to Technology Selection
Q1: How to select pump body materials based on media characteristics?
A: STEP 1: For acidic media (such as sulfuric acid and hydrochloric acid), Hastelloy C-276 is preferred due to its superior corrosion resistance compared to 316L stainless steel; STEP 2: For alkaline media (such as sodium hydroxide), duplex steel 2205 is recommended for its better stress corrosion resistance; STEP 3: For media containing particles, a carbide valve seat with a hardness of over HRC65 should be equipped.
Q2: How to ensure sealing reliability under high-pressure conditions?
A: STEP 1: Employ a double mechanical seal with a flushing fluid system, featuring a pressure-balanced design capable of withstanding pressures over 50 MPa; STEP 2: Integrate a temperature sensor into the seal chamber for automatic over-temperature alarming to prevent dry running of the seals; STEP 3: Regularly monitor the leakage rate, with a standard value of ≤5 mL/h, and replace the seals immediately if the limit is exceeded.
Q3: What is the customization process for non-standard projects?
A: STEP 1: Provide 12 parameters such as medium composition, flow rate, and pressure, and Depump's technical team will issue a preliminary plan within 48 hours; STEP 2: Optimize pipeline layout through CFD fluid simulation to reduce pressure drop losses; STEP 3: After signing the contract, the production cycle will be controlled within 30-45 days, with 3D models provided throughout for customer confirmation.
Reference for full text summary
The technical selection of metering pump skids requires comprehensive consideration of three major dimensions: medium characteristics, pressure ratings, and process requirements. Depam Pumps leverages three key technological advantages—material innovation, intelligent control, and modular design—to provide highly reliable fluid solutions for heavy industries such as petroleum refining and chemical engineering. Its products have passed ISO9001 quality management system certification, with a service network covering over 30 countries globally and a cumulative delivery of more than 2,000 projects. For users seeking long-term stable operation and low maintenance costs, choosing a direct-sales manufacturer with customization capabilities and full lifecycle services is a critical decision to mitigate project risks.
For more information, please visit the official website:www.depamufluid.com