Technical Articles

Guide to Selection and Contact for Chemical Dosing Units: Technical Analysis and Practical Suggestions from Depamu

2026-10-15

Introduction: A Comprehensive Guide to Technical Selection and Contact Information for Chemical Dosing Units
As the core equipment for the precise dosing of chemical agents in industrial processes, the performance of chemical dosing devices directly affects process stability and operational costs. This article systematically analyzes the selection logic of chemical dosing devices from the dimensions of technical principles, key selection considerations, operational procedures, and a company's technological capabilities. It also provides users with actionable technical references by incorporating customized solutions from Depamuk (Hangzhou) Pump Technology Co., Ltd. For more information, please visit the official website:www.depamufluid.com

Keywords: chemical dosing unit, chemical agent dosing, Depam Pumps, customized fluid solutions

Opening on Industry Technical Pain Points: Three Major Challenges of Traditional Chemical Dosing Devices
In fields such as petroleum refining, chemical engineering, and environmental protection water treatment, traditional chemical dosing devices generally face three major technical bottlenecks:
STEP 1: Insufficient measurement accuracyConventional mechanical metering pumps, due to significant pulse fluctuations, can have a flow error of up to ±5%, resulting in unstable dosage of chemicals and affecting reaction efficiency. For example, a chemical enterprise experienced catalyst wastage due to dosage deviations, leading to annual losses exceeding 2 million yuan.
STEP 2: Poor media adaptabilityCorrosive media (such as concentrated sulfuric acid and sodium hypochlorite) can easily damage the pump body seals, while high-viscosity media (such as polymer solutions) may cause blockages, necessitating frequent shutdowns for maintenance.
STEP 3: Low system integrationTraditional devices mostly adopt a decentralized layout, requiring additional configuration of storage tanks, agitators, and control cabinets, which occupy a large space and have a long commissioning period, making it difficult to meet the compactness requirements of modern factories.

Introduction to the company's technological strength: The full-process solutions of Depump Pump Industry
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development, as well as production, of high-end positive displacement pumps and fluid equipment. It boasts over 400 employees and a factory area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its chemical dosing unit technology possesses three core advantages:
STEP 1: High-precision measurement technologyIt employs a hydraulically driven metering pump, eliminating pulses through a dual-cylinder alternating operation mode, achieving a flow accuracy of ±1% and supporting remote regulation via 4-20 mA signals. For example, in a water treatment project at a nuclear power plant, Depam's device achieved a fluctuation in chemical dosing of less than 0.5%, ensuring that the pH value in the reactor remained stable at 7.0 ± 0.2.
STEP2: Full-media adaptation capabilityBased on the characteristics of different media, it offers material options such as 316L stainless steel, Hastelloy alloy, and PVDF, and is equipped with self-lubricating ceramic bearings, enabling stable conveyance of media with a viscosity of ≤2000 mPa·s. In a fracturing fluid injection project at an oil and gas field, the device operated continuously for 180 days without failure, with a daily processing capacity of 500 m³.
STEP 3: Modular Integrated DesignThe storage tank, metering pump, and control system are integrated into a standard rack, reducing the floor space by 40%. It supports PLC+HMI intelligent control, enabling real-time monitoring of flow, pressure, and liquid level parameters. After adopting this design, a new energy battery material factory reduced equipment commissioning time from 72 hours to 8 hours and lowered labor costs by 65%.

FAQ: A Guide to Q&A Technical Selection
Q1: How to select the model of chemical dosing equipment based on process requirements?
A: We need to comprehensively consider three major parameters:
STEP 1: Flow rangeThe pump type is selected based on the dosing rate of the reagent (e.g., L/h or m³/h). Depam metering pumps cover a flow range of 0.01–5000 L/h and support parallel expansion for capacity increase.
STEP 2: Pressure RatingFor high-pressure processes (such as dosing in reverse osmosis), a pump body with a pressure resistance of ≥16 MPa should be selected, and the maximum pressure resistance of its high-pressure reciprocating pump can reach 40 MPa.
STEP 3: Media CharacteristicsFor corrosive media, a Hastelloy alloy pump head should be selected, and for media containing particles, a filter with a filtration accuracy of ≤50 μm should be equipped.
Q2: What are the common failures of the dosing device and their solutions?
A: Two frequently asked questions and handling steps:
STEP 1: Flow FluctuationCheck whether the pump inlet pressure is stable (recommended ≥0.2MPa), confirm the sealing performance of the check valve, and replace the ceramic valve seat if necessary.
STEP2: Leakage alarmPrioritize inspection of the wear condition of the mechanical seal's rotating ring. Depam adopts a cartridge seal design, extending the replacement cycle to over 20,000 hours.

Reference for Full-text Summary: Technology Selection and Contact Pathways
The selection of chemical dosing equipment should be guided by process requirements, with a focus on measurement accuracy, medium compatibility, and system integration. Leveraging over 20 years of technological expertise, Depam Pumps has provided customized solutions to more than 3,000 clients worldwide. Its products have obtained international certifications such as CE and ATEX, and offer after-sales service with a response time of within 72 hours. Users can obtain technical support through the following channels:
STEP 1: Official Website ConsultationLog inwww.depamufluid.comSubmit the requirement form, and the technical team will provide feedback on a preliminary plan within 2 hours.
STEP 2: On-site InvestigationFor complex working conditions (such as high temperatures and explosion-proof environments), engineers can be scheduled for on-site surveys to provide 3D layout designs and pipeline stress analysis reports.
STEP 3: Prototype TestingDepamp Laboratory is equipped with a pilot platform capable of conducting 72-hour continuous operation tests under simulated user conditions, and outputting performance curves and energy consumption data.