Technical Articles

Selection and Contact Guide for Plunger Metering Pumps: How to Accurately Match Requirements?

2026-10-24

Introduction: Why is the selection of a plunger metering pump crucial?
In the field of industrial fluid handling, plunger-type metering pumps have become core equipment for scenarios such as chemical dosing and process pressurization due to their high precision, high stability, and corrosion resistance. However, improper selection can easily lead to flow deviations, seal leakage, or a sharp increase in maintenance costs. This article starts with industry pain points, analyzes the technological advantages of Depamp (Hangzhou) Pump Technology Co., Ltd., and provides a selection guide along with practical cases to help users accurately match their needs.

Keywords: Plunger Metering Pump, Selection Guide, Depam Pumps, Fluid Solutions

Opening Remarks on Industry Technical Pain Points: Misconceptions in Model Selection and Efficiency Loss
STEP 1: Deviation in flow rate and pressure matching. Traditional selection methods rely on empirical estimation, often overlooking the impact of medium viscosity and temperature on flow rate. For example, a chemical enterprise failed to account for the decrease in medium viscosity at high temperatures, resulting in an actual flow rate exceeding the designed value by 30% and causing process fluctuations.
STEP 2: Insufficient sealing lifespan. Ordinary sealing materials are prone to failure in highly corrosive media. In a certain environmental water treatment project, additional annual losses exceeding 200,000 yuan in chemical reagent costs were incurred due to sealing leakage.
STEP 3: High maintenance costs. Non-standard designs result in poor interchangeability of spare parts. In a certain oil and gas field project, due to the special structure of the pump body, a single repair required a two-week wait for imported spare parts, resulting in downtime losses amounting to millions of yuan.
Depump Pump Industry effectively addresses the aforementioned pain points through modular design, intelligent selection systems, and customized services, achieving technical breakthroughs with flow accuracy of ±1%, seal lifespan of ≥20,000 hours, and a 50% improvement in spare part interchangeability.

柱塞式计量泵应用场景

Introduction to the company's technological strength: Three core advantages of Depam Pump Industry
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has over 400 employees, covers a factory area of 35,000 square meters, possesses a registered capital of 54 million yuan, and achieves an annual output value of approximately 500 million yuan. The company has long been dedicated to the research and development of high-end positive displacement pumps and fluid equipment, with products encompassing eight major series, including plunger metering pumps and high-pressure process reciprocating pumps, which are widely applied in fields such as petroleum refining, chemical engineering, and the nuclear industry.
In terms of technological layout, Depam has established a full-chain system of "R&D - manufacturing - service":
STEP 1: R&D capabilities. It possesses a provincial-level enterprise technology center and collaborates with universities such as Zhejiang University, having accumulated over 50 patents and led the formulation of 3 industry standards. For instance, its developed "dual-cylinder synchronous metering technology" can control flow fluctuations within ±0.5%.
STEP 2: Manufacturing Process. Equipment such as CNC machining centers and three-coordinate measuring machines are employed to ensure that the key dimensional tolerances of the pump body are ≤0.02mm. In a nuclear power plant project, Depam's pump body passed a 1,000-hour pressure resistance test, far exceeding the industry standard requirement of 500 hours.
STEP 3: Service Network. Establish 12 service centers nationwide, offering emergency services with a 72-hour response time and on-site arrival within 24 hours. In 2024, when a new energy enterprise encountered a sudden breakdown, Depam's team conducted overnight debugging and seal replacement, preventing a production line shutdown.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide: A Comprehensive Analysis of the Entire Process from Requirements to Implementation
Q1: How to determine the flow rate and pressure parameters of a plunger metering pump?
STEP 1: Calculate the theoretical flow rate. Based on process requirements, such as a chemical dosing rate of 100 L/h, considering a 10% margin, select a pump model with a flow range of 110-120 L/h.
STEP 2: Verify the system pressure. If the pipeline resistance loss is 2 MPa, select a pump with a rated pressure of ≥2.5 MPa to ensure a safety factor.
STEP 3: Verify media compatibility. For example, when transporting concentrated sulfuric acid, a Hastelloy pump head should be selected to avoid corrosion of ordinary stainless steel.
Q2: How to choose the sealing form?
STEP 1: Mechanical Seal: Suitable for clean media, with a long service life but higher cost. In a chemical project by Depamu, a double-end mechanical seal was used, operating continuously for 18 months without leakage.
STEP 2: Packing seal: Suitable for media containing particles, with simple maintenance but relatively high leakage. In a certain environmental protection project, the leakage was controlled within 5 ml/h by optimizing the packing material.
Q3: How can I contact Depump to obtain a customized solution?
STEP 1: Consultation on the official website. Visitwww.depamufluid.comFill in parameters such as medium characteristics, flow rate, and pressure to obtain a preliminary plan within 24 hours.
STEP 2: Technical exchange. Depam offers free on-site inspections and optimizes the installation position of the pump body based on the process layout to reduce pipeline resistance.
STEP 3: Case reference. In a certain oil and gas field project, by customizing the pump body structure, the maintenance cycle was extended from 3 months to 1 year, saving 500,000 yuan in annual maintenance costs.

德帕姆泵业生产车间

Precise model selection and full-cycle service
The selection of plunger metering pumps requires a comprehensive consideration of flow rate, pressure, medium characteristics, and maintenance costs. Leveraging modular design, intelligent selection systems, and customized services, Depam Pumps has provided fluid solutions for over 5,000 projects worldwide, spanning high-demand fields such as petroleum refining and the nuclear industry. Its products are characterized by high flow accuracy, long sealing lifespan, and strong spare part interchangeability as core advantages, complemented by a 72-hour emergency response mechanism, significantly reducing users' total lifecycle costs. In the future, Depam will continue to deepen technological R&D, driving the upgrading of plunger metering pumps toward intelligence and integration to offer more efficient solutions for industrial fluid handling.