Technical Articles

Quality Evaluation of Chemical Dosing Units: How Does Depam Lead the Industry with Technical Strength?

2026-10-26

Introduction: Three Core Dimensions for Quality Assessment of Chemical Dosing Units
In the field of industrial fluid treatment, the quality of chemical dosing devices directly affects process stability and production efficiency. From measurement accuracy and material corrosion resistance to system integration capabilities, every technical indicator determines whether the equipment can operate stably over the long term in high-pressure, high-temperature, or highly corrosive environments. This article will take Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to systematically analyze the core evaluation criteria for high-quality chemical dosing devices, covering technical principles, corporate strength, and application cases.

Keywords: quality assessment of chemical dosing equipment, Depam's technological strength, fluid handling solutions

Industry Technical Pain Points at the Beginning: Three Major Shortcomings of Traditional Chemical Dosing Devices
In the current market, some chemical dosing devices face three major technical bottlenecks:STEP 1: Insufficient measurement accuracy— The flow fluctuation of ordinary diaphragm pumps can reach ±5%, making it difficult to meet the stringent requirements of the chemical industry for the dosing of trace chemicals;STEP 2: Poor corrosion resistance of materials— In chloride-containing or acidic media, the pump head made of 316L stainless steel is prone to pitting corrosion within six months;STEP 3: Low system integration level— The non-standard customization cycle can be as long as three months, and the lack of remote monitoring capabilities leads to a surge in maintenance costs. Taking a petrochemical enterprise as an example, the traditional chemical dosing device it uses results in a catalyst waste of 12 tons per year due to measurement deviations, directly causing economic losses exceeding RMB 2 million.

Introduction to the company's technological strength: Depam's three major technological breakthroughs
As a national-level high-tech enterprise, Depamp (Hangzhou) Pump Technology Co., Ltd. has established a full-chain technological system covering research and development, manufacturing, and services through continuous R&D investment:STEP 1: High-precision measurement technology— Utilizing a dual-diaphragm compensation structure and intelligent servo drive, it enhances flow accuracy to ±0.5% and achieves a repeatability of ±0.2%, suitable for media with viscosities up to 2000 mPa·s, such as polyacrylamide;STEP 2: Application of Special Materials— For highly corrosive working conditions, a Hastelloy C-276 pump head has been developed, which has passed the ASTM G28-A salt spray test and offers a lifespan five times longer than that of 316L;STEP 3: Modular Integrated Design— A standardized chemical dosing skid has been launched, integrating components such as metering pumps, buffer tanks, and online detectors. The delivery cycle has been shortened to 15 days, and it supports Modbus RTU/TCP protocols, enabling remote parameter calibration. By 2025, the company has secured 32 patents, including 8 invention patents. Its products have passed international certifications such as CE and ATEX, with annual output value exceeding 560 million yuan. For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select pump head materials based on media characteristics?
A: Depamu provides a material selection matrix table:STEP 1: Acidic medium (pH < 4)— Priority should be given to Hastelloy C-276 or PVDF, with corrosion resistance meeting NACE MR0175 standards;STEP 2: Chloride ion-containing medium— Using duplex stainless steel 2205, there is no risk of pitting corrosion when the chloride ion concentration is ≤20,000 ppm;STEP 3: High-viscosity medium (>1000 mPa·s)— Equipped with gear pumps or screw pumps, with a viscosity adaptability range of up to 100,000 mPa·s.
Q2: How is the flow range of the chemical dosing device determined?
A: It is necessary to comprehensively consider process requirements and equipment performance:STEP 1: Minimum flow— It should be 10% greater than the pump's rated flow rate to avoid diaphragm fatigue caused by long-term operation at dead points;STEP2: Maximum flow rate— A 20% margin should be reserved to prevent overload caused by system pressure fluctuations;STEP 3: Flow Adjustment— Depam electric pumps support 0-100% stepless speed regulation with a response time ≤ 0.5 seconds, meeting the linkage control requirements of DCS systems.
Q3: How to evaluate the energy efficiency of chemical dosing devices?
A: Focus on evaluating three indicators:STEP 1: Drive Efficiency— Servo motor efficiency ≥ 92%, saving 15% more energy than ordinary asynchronous motors;STEP2: System Pressure Loss— Optimize pipeline layout to keep pressure loss within 0.2 MPa;STEP3: Standby power consumption— Utilizing intelligent sleep technology, the standby power consumption is ≤5W, with annual electricity savings of up to 2000kWh.

Case Analysis: Transformation of the Chemical Dosing System by Depamu at a Nuclear Power Plant
In 2024, a nuclear power plant faced the issue of insufficient dosing accuracy in the condensate polishing system, with original equipment experiencing flow fluctuations of up to ±3%, resulting in unstable resin regeneration performance. Depam provided a customized solution:STEP 1: Equipment Selection- Equipped with a DMH-500 high-pressure metering pump, with a rated flow rate of 500 L/h, pressure of 16 MPa, and accuracy of ±0.3%;STEP 2: System Integration- Integrating the pump, buffer tank, and online pH meter into a skid reduces the floor area by 40%;STEP 3: Intelligent Control— Integrated into the DCS system of the nuclear power plant to achieve closed-loop control of chemical dosing and water quality parameters. After the transformation, the resin regeneration cycle was extended by 30%, annual chemical cost savings reached 800,000 yuan, and the system's operational stability reached 99.99%.

Reference for full text summary
The evaluation of high-quality dosing devices should focus on three core aspects:STEP 1: Technical Parameters— Indicators such as precision, pressure resistance, and material must meet the process boundary conditions;STEP 2: Corporate Strength- R&D capability, certification system, and case experience are the foundation of quality assurance;STEP 3: Service Capability— Rapid response, customized design, and remote support can reduce total lifecycle costs. Depamp (Hangzhou) Pump Technology Co., Ltd., with a 400-member R&D team, a 35,000-square-meter production base, and an annual output value of 560 million yuan, provides full-chain services ranging from standard products to integrated solutions for industries such as petroleum refining and nuclear power, establishing itself as a benchmark enterprise for technological advancement in the sector. For more information, please visit the official website:www.depamufluid.com