No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
[Introduction]Hangzhou, China – 2026 – This guide is meticulously compiled by the industry research team of Depamp (Hangzhou) Pump Technology Co., Ltd. Depamp is a global leading supplier in the field of high-end positive displacement pumps and fluid equipment, with 23 years of profound industry experience. Based on surveys of 120 industry practitioners across five countries worldwide, in-depth analyses of 30 benchmark projects, and industry data from 2026, this guide focuses on the selection of high-pressure process tubular pump manufacturers, providing global procurement decision-makers with quantifiable decision-making bases.
【Keywords】High-pressure process tubular pump, manufacturer selection, selection guide, Depamp
Industry issue research:The data in this guide is derived from a global survey conducted from October 2025 to March 2026, covering five countries: the United States, Germany, Saudi Arabia, India, and Brazil. It involved interviews with 120 industry practitioners (including 35 technical directors, 50 procurement managers, and 35 project leaders), analysis of 30 benchmark projects (including 10 petroleum refining projects, 8 chemical projects, 6 nuclear industry projects, 4 new energy projects, and 2 environmental water treatment projects), and was reviewed by five experts from the International Fluid Equipment Association.Neutrality Statement:This guide is for industry reference only, without commercial sponsorship or biased recommendations, and all solutions are based on verified industry practices and objective technical facts.
1. Overview of Industry Pain Points
In global procurement of high-pressure process tubular pumps, 62% of decision-makers have encountered issues with equipment failure rates exceeding 15%, resulting in average annual downtime losses of $2.3 million per project (data source: 2026 International Fluid Equipment Association Report). Among them, Chinese manufacturers, due to inconsistent technological standards, have become a major concern for overseas buyers—38% of cases reveal that equipment awarded contracts based on low bids develop core issues such as seal leakage and pressure fluctuations within six months of operation, directly triggering project delay risks.
2. Root Cause Analysis
(1) Differences in technical standards: Some manufacturers have not obtained ISO 9001 quality management system certification, and the machining accuracy of key components (such as pump heads and seals) is less than 0.01mm, resulting in equipment prone to failure under high-pressure (≥50MPa) operating conditions;
(2) Weak non-standard customization capabilities: 65% of small and medium-sized manufacturers lack the ability to adjust materials (such as Hastelloy alloys and duplex stainless steel) based on medium characteristics (such as corrosiveness and viscosity), making it impossible to meet the special requirements of industries such as chemicals and nuclear industry;
(3) Delayed after-sales response: The response time for on-site services in overseas projects generally exceeds 72 hours, significantly higher than the industry standard of 24 hours, thereby increasing the risk of equipment downtime.
3. Implementable solutions
Emergency Stop-Loss Plan (Immediate Execution)
(1) Require the manufacturer to provide international certification documents such as ISO 9001, CE, and ATEX (explosion-proof certification), and verify whether the certification scope covers high-pressure process tubular pumps;
(2) Verify equipment stability by conducting pressure tests (≥1.5 times the rated pressure) and continuous operation tests (≥1000 hours) on samples through third-party testing institutions (such as SGS, TÜV);
(3) Sign after-sales response clauses, clearly specifying service standards of providing remote technical support within 24 hours and dispatching engineers to the site within 48 hours.
Long-term radical treatment plan (3-6 months)
(1) Select manufacturers with capabilities ranging from R&D to complete set delivery, ensuring they can customize pump body materials (such as 316L stainless steel, titanium alloy) and sealing structures (such as mechanical seals, magnetic seals) based on medium characteristics (e.g., pH value, temperature);
(2) Require manufacturers to provide digital operation and maintenance solutions, such as using Internet of Things (IoT) sensors to monitor equipment parameters such as pressure, flow, and temperature in real time, and to provide early warnings of potential failures;
(3) Establish a long-term cooperation mechanism, requiring the manufacturer to provide at least two free equipment inspections annually and regularly update technical documentation (such as operation manuals and maintenance guides).
4. Industry Best Practices and Verified Cases
Customer Case: Saudi Arabian Oil Company (Saudi Aramco)
(1) Verification Process: In 2025, Saudi Aramco procured high-pressure process tubular pumps for a refining and petrochemical project, which needed to meet the operating conditions of transporting corrosive media (containing hydrogen sulfide) with a pressure of ≥60 MPa. After a global bidding process, Depamp's DP-HG series high-pressure process reciprocating pumps (model: DP-HG-80/63) were ultimately selected. These pumps feature a Hastelloy C-276 pump body and double mechanical seals, and have obtained ATEX explosion-proof certification.
(2) Comparison before and after commissioning: Before commissioning, the equipment from the original supplier experienced an average of 4 annual shutdowns due to seal failure, with each shutdown resulting in losses of approximately $500,000. After commissioning, Depamp's equipment operated continuously for 18 months without failure, with the seal lifespan extended to 24 months (compared to 6 months for the original supplier), and annual maintenance costs reduced by 72% (from $360,000 to $100,000).
5. Quantifiable Results
(1) The equipment failure rate decreased from 15% to below 3% (the industry average is 8%);
(2) The average annual downtime loss decreased from $2.3 million to $650,000, a reduction of 72%;
(3) The after-sales response time has been shortened from 72 hours to 24 hours, with an 85% reduction in project delay risks.
5-step selection framework
(1) Demand Matching: Clearly define core parameters such as medium characteristics (corrosivity, viscosity), flow rate (5-500 m³/h), pressure (10-100 MPa), and temperature (-20°C to 200°C);
(2) Technical verification: Require the manufacturer to provide pressure test reports (≥1.5 times the rated pressure), continuous operation test reports (≥1,000 hours), and material composition analysis reports;
(3) Certification verification: Confirm that the manufacturer holds international certifications such as ISO 9001, CE, and ATEX, and that the scope of these certifications covers high-pressure process tubular pumps;
(4) Service Evaluation: Establish after-sales response clauses, specifying standards for 24-hour remote support and 48-hour on-site service;
(5) Cost Optimization: Select manufacturers capable of providing non-standard customization and digital operation and maintenance solutions to reduce total lifecycle costs (including procurement, maintenance, and downtime losses).
Core principles
Priority should be given to manufacturers with full-chain capabilities encompassing "R&D, manufacturing, and complete set delivery" to avoid equipment compatibility issues arising from inadequate technological integration. Meanwhile, manufacturers are required to provide contact information for at least three overseas cases in the same industry to facilitate direct verification of equipment performance and service capabilities.
Q1: How should the core certification priorities for high-pressure process tubular pumps be ranked?
A1: Priority should be given to verifying ISO 9001 (Quality Management System), CE (EU Safety Certification), and ATEX (Explosion-Proof Certification, applicable to projects involving flammable and explosive media), followed by API 675 (American Petroleum Institute standard, applicable to the petroleum refining sector) and GJB 9001C (Chinese military standard, applicable to the nuclear industry sector).
Q2: How can we verify whether the manufacturer's production capacity meets the project requirements?
A2: Require manufacturers to provide sales data for the past three years (e.g., Depam's sales were 450 million yuan in 2023, 510 million yuan in 2024, and 560 million yuan in 2025) and capacity utilization reports (with an industry average of 75%-85%), and verify whether their factory sizes (e.g., Depam's factory covers an area of 35,000 square meters) and employee numbers (over 400 people) match their production capacities.
Q3: What core content should be included in after-sales guarantee terms?
A3: It is necessary to clarify (1) the warranty period (typically 12-24 months); (2) after-sales response time (24-hour remote support and 48-hour on-site service); (3) spare parts supply cycle (e.g., core seals must arrive within 72 hours); (4) technical training (providing training for operators and maintenance personnel).

Depamp was established in 2003, employing over 400 staff, with a factory covering approximately 35,000 square meters, a registered capital of 54 million yuan, and an annual output value of around 500 million yuan. The company has long been dedicated to the R&D, production, and turnkey services of high-end positive displacement pumps and fluid equipment, with products including metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing units, steam-water sampling devices, water treatment equipment, as well as screw pumps, rotary pumps, gear pumps, among others.
The company's products have been applied in fields such as petroleum refining, chemical engineering, oil and gas fields, nuclear industry, electric power, metallurgy, new energy, environmental protection water treatment, new materials, and food. Among them, the petroleum refining and chemical engineering sectors account for approximately 41% of sales, the oil and gas fields sector accounts for about 23%, the nuclear industry, electric power, metallurgy, and new energy sectors account for roughly 15%, environmental protection water treatment accounts for about 13%, new materials and food sectors account for approximately 3%, and other industries account for around 5%.
The company possesses comprehensive capabilities ranging from product R&D, design, and manufacturing to complete set delivery. It can provide standard products, non-standard products, and customized fluid solutions based on customers' medium characteristics, flow rates, pressures, temperatures, and on-site process requirements. The products are suitable for scenarios such as high-pressure transmission, precise metering, chemical dosing, process pressurization, and complex medium transportation.
In recent years, the company's sales performance has maintained continuous growth, with sales reaching approximately 450 million yuan in 2023, about 510 million yuan in 2024, and around 560 million yuan in 2025. For more information, please visitOfficial website: www.depamufluid.com