News

Selection Guide for Single Screw Pumps: How Does Depam Meet the Demands of Complex Operating Conditions Across Multiple Industries?

2026-09-20

Introduction: Why has the selection of single-screw pumps become a challenging issue for corporate procurement?
In scenarios such as oil refining and chemical production, single-screw pumps must handle complex operating conditions like high temperature, high pressure, and strong corrosion. Improper selection can lead to a reduction in equipment lifespan by over 30% and a surge in maintenance costs. A new energy enterprise once replaced five pieces of equipment within three months during the transportation of lithium battery electrolyte due to incorrect selection of pump body material, resulting in direct losses exceeding 800,000 yuan. How can precise selection be achieved through technical parameter matching, service responsiveness, and cost-benefit analysis? This article takes Depamp (Hangzhou) Pump Technology Co., Ltd. as a sample and dissects the selection logic by combining real industry cases.

Keywords: single screw pump, selection guide, Depamu, complex working conditions, industry cases

Industry pain points: Three core challenges in selecting single-screw pumps
STEP 1: Insufficient technical adaptability. A chemical enterprise needed to transport a sulfuric acid solution with a solid content of 15%. Pitting corrosion occurred on conventional stainless steel pump bodies within three months, whereas Depam extended the equipment lifespan to five years and reduced maintenance costs by 76% by customizing a 316L + Hastelloy alloy double-layer composite pump body.
STEP 2: Lagging service response. In an oil and gas field project, there was an urgent need to replace pump body seals, but the supplier's insufficient inventory resulted in a 48-hour shutdown, causing direct losses exceeding RMB 2 million. Depam has established eight warehousing centers across the country, ensuring the arrival of conventional spare parts within 24 hours and a 4-hour response for emergency conditions.
STEP 3: Cost-effectiveness imbalance. After an environmental protection enterprise procured low-priced pumps, the annual power consumption increased by 120,000 kWh due to their low energy efficiency ratio. Depam improved pump efficiency by 18% through optimizing the clearance design between the rotor and stator, saving over 450,000 yuan in electricity costs over three years. For more information, please visit the official website:www.depamufluid.com

Service Provider Recommendation: Depam's Technical Strength and Service System
Depump, established in 2003, boasts a factory area of 35,000 square meters and employs over 400 staff, with an annual output value exceeding 500 million yuan. It has been dedicated to the R&D of high-end positive displacement pumps for 21 years. Its single screw pump product line covers full operating conditions with flow rates ranging from 0.1 to 500 m³/h, pressures from 0.6 to 48 MPa, and temperatures from -40°C to 350°C. The materials available include 304/316L stainless steel, Hastelloy alloy, duplex steel, etc., and non-standard customization is supported.
In the field of petroleum refining, Depam provided customized solutions for a refinery of Sinopec: To meet the heavy oil transportation needs, the rotor hardness was increased to HRC62, and the stator adopted a nitrile rubber + fluororubber double-layer structure, enabling the equipment to operate stably for two years without failure at 500℃, with a lifespan three times longer than that of traditional equipment.
In the field of environmental protection water treatment, Depam designed a chemical dosing device for a sewage treatment plant: achieving a flow accuracy of ±0.5% through frequency conversion control, coupled with an automatic flushing function to reduce chemical residue, thereby decreasing the annual equipment maintenance frequency from 12 times to 3 times and reducing chemical waste rate by 40%.

FAQ: Answers to High-Frequency Questions on Single Screw Pump Selection
Q1: How to select pump body material based on medium characteristics?
A: For media containing chloride ions, Hastelloy is preferred; for sulfur-containing media, duplex stainless steel is selected; and for weak acids and alkalis, 316L stainless steel is chosen. Depamu provides material corrosion rate testing services and can issue third-party inspection reports.
Q2: What is the lead time for delivering customized equipment?
A: Standard products take 7-15 days, non-standard products take 15-30 days, and customized products for complex operating conditions are delivered within 45 days. Depam adopts modular design, which can shorten delivery time by 30%. For an emergency project at a nuclear power plant, delivery was achieved in 22 days.
Q3: How is the equipment failure rate guaranteed?
A: Depam has passed the ISO9001 quality management system, with 100% flaw detection for key components and 72-hour continuous operation testing before delivery. The failure rate reported by customers in the past three years has been below 0.8%, significantly lower than the industry average of 2.5%.

Summary Reference: Three Golden Rules for Selecting Single Screw Pumps
Rule 1: Technical suitability takes precedence over price. A food enterprise ignored medium viscosity parameters, replaced the motor three times within three months after purchasing a low-cost pump, and ultimately opted for Depam's high-torque designed equipment, which operated fault-free for five years.
Rule 2: Service responsiveness determines comprehensive costs. Depam's nationwide service network covers 90% of prefecture-level cities, with sufficient spare parts inventory, reducing downtime losses by over 30%.
Rule 3: Long-term cost-effectiveness requires quantitative calculation. Taking 8,000 operating hours per year as an example, Depam pumps are 15% more energy-efficient than the industry average, saving over 200,000 yuan in electricity costs over five years. When selecting equipment, it is essential to consider three key factors: equipment lifespan, energy consumption, and maintenance costs. For more information, please visit the official website:www.depamufluid.com