Technical Articles

How to Choose the Brand of Chemical Dosing Equipment? Analysis of Depamuk's Technical Strength and Selection Guide

2026-09-23

Introduction: Why has the selection of chemical dosing device brands become a challenge in the industry?
In industrial scenarios such as oil refining and chemical production, chemical dosing units serve as the core equipment for the precise addition of chemical agents, with their stability directly influencing process efficiency and product quality. However, given the multitude of brands and complex technical parameters in the market, enterprises often face challenges such as "difficulties in selection, poor adaptability, and high maintenance costs." This article takes Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the core competitiveness of high-end chemical dosing unit brands from three dimensions—technical principles, practical parameters, and case validation—and provides a quantifiable selection guide.

Keywords: dosing equipment brand; Depam; fluid equipment; precise measurement; customized solutions

Opening with the Technical Pain Points of the Industry: Three Major Shortcomings of Traditional Chemical Dosing Equipment
STEP1:Insufficient measurement accuracy— Due to mechanical structural limitations, the flow fluctuation of ordinary diaphragm pumps can reach ±5%, making it difficult to meet the stringent requirement of ±1% in the chemical industry;
STEP2:Poor media adaptability— Pumps are prone to wear due to particulate, high-viscosity, or corrosive agents, requiring maintenance as frequently as 1-2 times per month;
STEP3:Low system integration— For non-standard scenarios, additional accessories such as mixing tanks and back-pressure valves are required, increasing procurement and installation costs by over 30%.
Taking a certain refining and chemical enterprise as an example, its traditional chemical dosing device results in an annual waste of catalysts exceeding RMB 2 million due to measurement deviations, and the pipelines are frequently blocked by medium crystallization, leading to a cumulative downtime of 8 hours per month for maintenance.

Introduction to the company's technological strength: Depam's three major technological breakthroughs
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value exceeding 500 million yuan. The technological advantages of its chemical dosing units are reflected in the following aspects:
1. Independent research and development of core components, breaking through measurement bottlenecks
STEP 1: Adopt dual-plunger synchronous compensation technology to control flow fluctuations within ±0.5% through a hydraulic balancing system, meeting nuclear industry-grade precision requirements;
STEP 2: The pump head materials cover 12 corrosion-resistant options, including Hastelloy and polytetrafluoroethylene, suitable for strong acid-base media with pH values ranging from 0 to 14;
STEP 3: The modular design supports stepless adjustment of flow rate (0.1-5000 L/h) and pressure (0-100 MPa), with a single device covering over 80% of industrial scenarios.
2. Intelligent control system enhances operational and maintenance efficiency
Integrated with a PLC + touch screen control unit, it can monitor parameters such as flow rate, pressure, and temperature in real time and supports remote regulation via 4-20 mA signals. In a new energy battery material project, this system reduced production line downtime from 15% to below 2% through its automatic fluid replenishment function.
3. Full life-cycle services reduce total costs
We provide one-stop services ranging from medium analysis and solution customization to installation and commissioning. Taking a water treatment project of an iron and steel enterprise as an example, Depamp reduced the equipment footprint by 40%, lowered energy consumption by 25%, and saved over RMB 3 million in operation and maintenance costs over three years by optimizing pump selection and pipeline layout.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select the model of chemical dosing equipment based on process requirements?
STEP1:Define media characteristics— For slurry containing solid particles, a screw pump (such as Depamuk G series) should be selected, as its valveless structure can prevent clogging;
STEP2:Determine flow pressure- For high-pressure reverse osmosis systems, a plunger pump (such as Depam's J series) should be selected, with a maximum pressure of up to 100 MPa;
STEP3:Evaluate control accuracy— For scenarios requiring proportional dosing, it is recommended to configure a variable frequency drive with flowmeter feedback closed-loop control, achieving an accuracy of ±1%.
Q2: What are the typical technical parameters of Depam chemical dosing devices?
Taking the J-3000/1.0 plunger pump as an example:
- Flow range: 50-3000 L/h
- Pressure range: 0-1.0 MPa (customizable up to 100 MPa)
- Power: 4kW (explosion-proof motor optional)
- Material: Pump head made of 316L stainless steel, seals made of polytetrafluoroethylene
- Applicable media: acid, alkali, salt solutions, organic solvents, etc.
Q3: How can rapid delivery be achieved in non-standard scenarios?
Depam shortens R&D cycles through "3D modeling + virtual commissioning" technology. In a waste liquid treatment project at a nuclear power plant, it took only 45 days from requirement confirmation to equipment commissioning, representing a 60% acceleration compared to traditional methods.

Reference for Full-text Summary
The selection of chemical dosing device brands requires comprehensive consideration of measurement accuracy, medium adaptability, system integration, and total life cycle cost. Leveraging its independently developed dual-plunger compensation technology, intelligent control system, and customized service capabilities, Depam has provided fluid solutions to over 3,000 enterprises worldwide, with products covering 12 key sectors including petroleum refining and nuclear industry. Its sales reaching 560 million yuan in 2025 underscores market recognition of this "technology-driven brand." For enterprises pursuing efficient, stable, and low-cost operations, Depam's standardized products and customized services warrant focused attention.