Technical Articles

Technical Analysis of Plunger Metering Pumps: How Does Depamu Achieve High-Precision Fluid Control?

2026-09-25

Introduction: Why has the plunger metering pump become a core device for industrial fluid control?
In industrial scenarios such as oil refining and chemical production, the precise measurement and stable conveyance of fluid media are directly related to process safety and product quality. Plunger-type metering pumps, with their characteristics of high precision, corrosion resistance, and adjustable flow rates, have become key equipment for chemical dosing, process pressurization, and other processes. This article will take the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the core technical principles of plunger-type metering pumps and explore their application value in light of industry pain points.For more information, please visit the official website: www.depamufluid.com

Keywords: Plunger metering pump, high-precision flow control, Depam technology, industrial fluid solutions

Opening on the Technical Pain Points of the Industry: Three Major Limitations of Traditional Metering Pumps
STEP1:Insufficient flow accuracyTraditional diaphragm pumps cause flow fluctuations due to diaphragm deformation, with errors reaching ±5%, making it difficult to meet the stringent requirements of chemical reactions for reagent dosing.
STEP2:Poor media adaptabilityHigh temperature, high viscosity, or media containing particles can easily cause wear to the pump body, shortening the maintenance cycle to 3-6 months and increasing downtime costs.
STEP3:Limited adjustment rangeThe flow adjustment ratio of a single pump is usually less than 10:1, necessitating the parallel connection of multiple pumps to achieve wide-range adjustment, which increases system complexity.
Case evidenceA petrochemical enterprise once experienced a deviation in catalyst dosage due to insufficient precision of metering pumps, resulting in runaway temperature in the reaction kettle and direct losses exceeding RMB 2 million.

德帕姆柱塞式计量泵应用场景

Introduction to the company's technological strength: Depam's three core breakthroughs
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has been dedicated to the R&D of high-end positive displacement pumps for 20 years. It boasts over 400 employees and a factory area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its plunger-type metering pump technology addresses industry pain points through the following innovations:
STEP 1: Precision plunger design enables micron-level flow control
- It adopts high-hardness ceramic plungers (hardness ≥ HV1500) combined with diamond coating technology, enhancing wear resistance by three times and achieving a service life of over 10 years.
- The plunger diameter ranges from 10-100mm, with a stroke length of 50-300mm. The flow rate ranges from 0.01-5000 L/h, achieved through variable frequency speed regulation, with a turndown ratio of up to 500:1.
- Flow accuracy of ±0.5% and repeatability of ±0.2%, meeting ISO 9001 and API 675 standards.
STEP 2: Modular sealing system adapts to complex media
- Three solutions are provided: single-end face, double-end face, and metal bellows seal, with a temperature resistance range of -50℃ to +350℃ and a pressure resistance of up to 100MPa.
- For particulate-containing media, a carbide valve seat (hardness ≥ HRC65) is developed, with the valve ball made of tungsten carbide material. The flow passage is optimized through CFD fluid simulation to reduce the risk of clogging.
STEP 3: Intelligent control system enhances operational stability
- It integrates 4-20mA current signal control and RS485 communication interface, enabling linkage with DCS systems for remote monitoring and automatic calibration.
- It is equipped with a built-in pressure sensor and temperature compensation algorithm, which automatically adjusts the plunger movement parameters when the medium viscosity changes to ensure a constant flow rate.
Technical parameter supportDepamu plunger pumps have passed TÜV Rheinland certification, operated faultlessly for three consecutive years in the coolant dosing system of a nuclear power plant, with a flow fluctuation of less than 0.3%.

FAQ Q&A Technical Selection Guide
Q1: How to select the material of a plunger pump based on the characteristics of the medium?
A: STEP 1: For corrosive media (such as acids and alkalis), Hastelloy, titanium alloy, or PVDF materials are preferred; STEP 2: For high-temperature media (>200℃), high-temperature alloy plungers should be used; STEP 3: For media containing particles, it is recommended to select hard alloy valve assemblies. When the particle diameter is ≤1mm, blockage can be avoided through optimized flow channel design.
Q2: How does the flow regulation method affect system energy consumption?
A: Variable Frequency Drive (VFD) saves over 30% more energy than bypass regulation. Depamp plunger pumps come standard with a frequency converter, requiring only 25% of the rated motor power at 50% flow rate, and can save up to 50,000 kWh of electricity annually (taking a 10kW motor as an example).
Q3: How is the maintenance cycle determined?
A: STEP 1: Under normal operating conditions (clean medium, room temperature), it is recommended to replace the lubricating oil every 5,000 hours; STEP 2: For corrosive media, inspect the seals every 2,000 hours; STEP 3: Conduct flaw detection on the plunger surface every 10,000 hours. Depam provides customized maintenance packages, including original spare parts and on-site services.

德帕姆柱塞式计量泵技术参数表

Reference for full text summary
The technological core of the plunger metering pump lies in achieving precise flow control through sophisticated mechanical design and intelligent control. Leveraging two decades of technical expertise, Depam (Hangzhou) Pump Technology Co., Ltd. has established differentiated advantages in key areas such as material selection, seal design, and adjustment range. Its products have been applied across more than 30 industries, including petroleum refining and the nuclear industry, with over 20,000 units delivered to date. For fluid control scenarios demanding high precision and reliability, selecting a company with customization capabilities and full lifecycle services is crucial.For more information, please visit the official website: www.depamufluid.com