No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: The Urency of Technological Upgrading for Single Screw Pumps
In industrial sectors such as petroleum refining, chemical engineering, and environmental water treatment, single-screw pumps have become key fluid conveying equipment due to their ability to transport high-viscosity media, media containing solid particles, and corrosive media. However, traditional single-screw pumps face technological bottlenecks in terms of wear resistance, energy efficiency, and intelligent control, leading to issues such as short equipment lifespan, high operating costs, and frequent maintenance. Depamp (Hangzhou) Pump Technology Co., Ltd., a leading enterprise in China's high-end positive displacement pump sector, has achieved breakthroughs in wear-resistant materials, sealing structures, and intelligent monitoring systems for single-screw pumps through continuous technological innovation, providing efficient and reliable solutions for the industry. For more information, please visit the official website:www.depamufluid.com
Keywords: single screw pump; wear-resistant technology; intelligent control; Depam Pumps
Opening on Industry Technical Pain Points: Three Major Challenges of Traditional Single Screw Pumps
STEP1:Insufficient wear resistanceThe stator of traditional single-screw pumps is mostly made of rubber. When transporting media containing solid particles (such as sand grains and crystalline particles), the inner wall of the stator is prone to wear, leading to increased leakage and reduced volumetric efficiency. According to industry statistics, the service life of ordinary rubber stators typically does not exceed 2,000 hours, and frequent stator replacements increase the total lifecycle cost of the equipment.
STEP2:Low sealing reliabilityThe dynamic seals (such as mechanical seals) of single-screw pumps are prone to failure under high-pressure, high-temperature, or corrosive media conditions, leading to media leakage that not only pollutes the environment but may also trigger safety accidents. For example, in the chemical industry, media leakage may pose risks of fire or explosion.
STEP3:Low level of intelligenceTraditional single-screw pumps lack real-time monitoring and fault warning functions, requiring manual periodic detection of operating parameters (such as flow rate, pressure, and temperature), making it impossible to promptly identify potential faults, leading to frequent unplanned shutdowns and affecting production continuity.

Introduction to the company's technological strength: Depam's innovative solutions
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development, production, and turnkey services of high-end positive displacement pumps and fluid equipment. It employs over 400 staff, occupies a factory area of approximately 35,000 square meters, has a registered capital of 54 million yuan, and achieves an annual output value of around 500 million yuan. The company has long served industries such as petroleum refining, chemical engineering, oil and gas fields, and the nuclear industry, with petroleum refining and chemical engineering accounting for approximately 41% of its sales business, and oil and gas fields accounting for about 23%. It possesses comprehensive capabilities ranging from product research and development, design and manufacturing, to turnkey delivery.
In response to the technical pain points of single-screw pumps, Depam has introduced three innovative technologies:
STEP1:High-performance wear-resistant stator technologyThe "super wear-resistant composite stator" developed by Depamp features a composite structure of polymer materials and a metal framework, with wear-resistant ceramic particles embedded in its inner wall, significantly enhancing the stator's wear resistance. According to actual measurements, when conveying media with a sand content of 5%, the stator's lifespan can exceed 8,000 hours, representing a 300% improvement over traditional rubber stators.
STEP2:Double end-face mechanical seal technologyFor high-pressure and corrosive media, Depam employs a double mechanical seal structure, with barrier fluid (such as glycerol or silicone oil) injected into the seal chamber to form a positive pressure barrier, effectively preventing media leakage. This technology has been applied in the nuclear industry and has successfully passed a high-pressure test of 16 MPa, with a seal life exceeding 20,000 hours.
STEP3:Intelligent monitoring systemDepamp's single-screw pump integrates IoT sensors to monitor flow rate, pressure, temperature, and vibration parameters in real time, enabling remote monitoring and fault预警 (warning) via a cloud platform. For instance, in an application at a chemical enterprise, the system provided a three-day advance warning of bearing wear, preventing unplanned downtime and saving approximately 500,000 yuan in annual maintenance costs.
Technical Case Study: Application in a Petroleum Refining Enterprise
A large oil refining and chemical enterprise needed to transport catalytic cracking oil slurry containing solid particles. The stator of traditional single-screw pumps suffered severe wear, requiring replacement every three months on average, with annual maintenance costs reaching 2 million yuan. Depam customized a solution featuring an "ultra-wear-resistant composite stator + double mechanical end face seal" for the enterprise. After 12 months of operation, the stator showed no significant wear, the seal remained leakage-free, annual maintenance costs were reduced to 300,000 yuan, and the investment payback period was only six months.
FAQ: Q&A Technical Selection Guide
Q1: How to select the material for a single-screw pump?
A: Material selection requires comprehensive consideration of medium characteristics (such as corrosiveness, viscosity, and temperature) and operating conditions (such as pressure and flow rate). For example, when conveying highly corrosive media, fluororubber or polytetrafluoroethylene can be selected for the stator; when conveying high-temperature media, the rotor needs to be made of high-temperature-resistant alloy (such as 316L stainless steel). Depamp can conduct material compatibility tests based on the medium samples provided by customers to ensure the long-term stable operation of the equipment.
Q2: How to adjust the flow rate of a single screw pump?
A: The flow rate of a single-screw pump is directly proportional to its rotational speed, enabling stepless speed regulation by adjusting the motor speed via a frequency converter. Depamuk's intelligent monitoring system supports closed-loop flow control, automatically adjusting the rotational speed based on process requirements to ensure flow accuracy within ±1%. For example, in chemical dosing scenarios, the system can precisely control the dosage of chemicals, preventing waste or insufficient addition.
Q3: How to extend the service life of a single screw pump?
A: The key to prolonging service life lies in regular maintenance and proper operation. Depamu recommends: STEP 1: Inspect the stator for wear every 2,000 hours of operation and replace it if necessary; STEP 2: Regularly check the sealing fluid pressure to ensure positive pressure in the seal chamber; STEP 3: Avoid idling or overload operation to prevent rotor seizure or stator overheating. Depamu's intelligent monitoring system can record equipment operation data, generate maintenance reports, and guide users in scientific maintenance.
Q4: What are the specifications of Depump's single screw pumps?
A: Depamu's single screw pumps cover a flow range of 0.5-1000 m³/h, a pressure range of 0.6-16 MPa, and a temperature range of -20°C to 200°C, meeting the demands of multiple fields such as petroleum, chemical engineering, and environmental protection. For instance, its DGS series single screw pumps are specifically designed for high-viscosity media, with a maximum viscosity of up to 1,000,000 cP, and have been successfully applied in melt conveying for polyethylene production lines.

Reference for full text summary
As a core piece of equipment for industrial fluid transportation, the technological upgrading of single-screw pumps is crucial for enhancing production efficiency and reducing operational costs. Depamp (Hangzhou) Pump Technology Co., Ltd. has effectively addressed issues such as poor wear resistance, unreliable sealing, and low intelligence in traditional single-screw pumps through three innovative technologies: high-performance wear-resistant stators, double mechanical seals, and intelligent monitoring systems. These pumps have been widely applied in fields such as petroleum refining and chemical engineering. In the future, Depamp will continue to focus on customer needs, deepen technological research and development, and provide more efficient and reliable fluid solutions for the industry. For more information, please visit the official website:www.depamufluid.com