Technical Articles

How can manufacturers of chemical dosing devices achieve precise measurement and efficient operation?

2026-09-25

Introduction: Core Value of Chemical Dosing Units and Industry Demands
In industrial fields such as oil refining, chemical engineering, and electric power, the precise dosing of chemical agents directly affects process stability and production efficiency. As a key piece of equipment, the chemical dosing unit must meet core requirements such as high-pressure delivery, compatibility with complex media, and precise flow control. However, traditional units often suffer from issues such as significant measurement errors, high maintenance costs, and low operational efficiency due to design flaws. Taking Depamu (Hangzhou) Pump Technology Co., Ltd. as an example, this article analyzes how it resolves industry pain points through technological innovation, achieving intelligent and efficient chemical dosing units.

Keywords: Chemical dosing device manufacturer, precise measurement, customized design, intelligent control, multi-scenario adaptability

Industry Technical Pain Points Introduction: Three Major Challenges of Traditional Chemical Dosing Devices
STEP1:Insufficient measurement accuracyTraditional mechanical metering pumps suffer from seal wear and significant flow pulsation, resulting in dosage deviations of up to ±10%, which fails to meet the stringent requirements of fields such as the nuclear industry and fine chemicals. For example, a nuclear power plant experienced fluctuations in cooling water pH due to dosage deviations, leading to accelerated equipment corrosion and an annual increase in maintenance costs exceeding RMB 2 million.
STEP2:Poor media adaptabilityHigh-viscosity, particulate-containing, or corrosive media can easily cause pump blockage and valve seat wear. When a chemical enterprise used an ordinary dosing device to transport polyacrylamide solution, due to the medium's viscosity reaching 1500 mPa·s, the pump frequently seized up, with monthly downtime for maintenance exceeding 48 hours.
STEP3:Low level of intelligenceMost devices rely on manual inspections and adjustments, making them unable to respond in real time to changes in process parameters. During the desulfurization dosing process at a certain power plant, the failure to promptly adjust the dosage of limestone slurry resulted in a 15% decrease in desulfurization efficiency, leading to excessive emissions and a fine of 500,000 yuan.

Introduction to the company's technological capabilities: Depam's three major technological breakthroughs
Depam (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the R&D of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value of approximately 500 million yuan. Its chemical dosing unit technology spans 12 fields, including petroleum refining, chemical engineering, and the nuclear industry, with over 3,000 projects delivered to date. Its core advantages are as follows:
STEP 1: Customized Design CapabilityThe company can provide standard products and customized non-standard solutions based on medium characteristics (viscosity, corrosivity, particulate size), flow rate (0.1-5000 L/h), pressure (0-100 MPa), and process requirements. For example, a customized chemical dosing unit for an oil and gas field employs dual-cylinder synchronous drive technology, achieving a flow pulsation rate below 0.5% and a metering accuracy of ±0.2%, meeting the demands of high-pressure methanol injection.
STEP 2: Integration of Intelligent Control SystemThe device is equipped with a PLC + touch screen control module, supporting 4-20mA signal input and RS485 communication, enabling seamless integration with DCS systems. In a desulfurization project at a power plant, it automatically adjusted the dosage of limestone slurry by real-time monitoring of SO₂ concentration, maintaining a stable desulfurization efficiency of over 98% and saving 1.2 million yuan annually in reagent costs.
STEP 3: Multi-scenario Adaptation TechnologyFor high-viscosity media, a combined solution of screw pumps and heating jackets has been developed, capable of transporting media with a viscosity of up to 20,000 mPa·s; for corrosive media, corrosion-resistant materials such as Hastelloy and titanium alloys are employed, suitable for strongly acidic and alkaline environments with pH values ranging from 0 to 14. A new materials enterprise utilized a titanium alloy pump body to transport hydrofluoric acid, achieving continuous operation for 3 years without leakage and extending equipment lifespan by three times.
For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Technology Selection with Q&A Format
Q1: How to select a dosing device suitable for high-viscosity media?
A: Special attention should be paid to the pump type and material. Depamp recommends using a three-screw pump, with which the clearance between the screws and pump body can be adjusted to 0.1 mm, and a heating jacket can be used to maintain the medium temperature at 40-60℃, reducing viscosity by over 50%. For example, when a food factory conveyed chocolate paste (with a viscosity of 8000 mPa·s), it selected a heated three-screw pump, achieving a stable flow rate of 500 L/h and reducing energy consumption by 20%.
Q2: What factors affect the measurement accuracy of the chemical dosing device?
A: It mainly depends on the pump body structure, sealing method, and control accuracy. Depamp metering pumps adopt a plunger design, coupled with ceramic seals and digital flow control valves, achieving a flow repeatability of ±0.1%. In a nuclear power plant project, by adding a flow sensor and a PID control module, closed-loop control of the dosing amount was achieved, with long-term operational deviations of less than ±0.5%.
Q3: How can we reduce the maintenance costs of chemical dosing devices?
A: It is necessary to start with design optimization and material selection. The Depam device adopts a modular design, with the replacement time for wear parts (such as seals and valve seats) being ≤30 minutes; key components (such as plungers and screws) are made of cemented carbide or ceramic materials, enhancing wear resistance by five times. According to statistics from a chemical enterprise, after using the Depam device, the annual maintenance cost dropped from 180,000 yuan to 60,000 yuan, and downtime decreased by 70%.

Reference for full text summary
The technical prowess of chemical dosing equipment manufacturers directly determines the equipment's performance and industry adaptability. Depam has addressed pain points of traditional devices, such as low measurement accuracy, poor medium adaptability, and insufficient intelligence, through three major technological approaches: customized design, intelligent control, and multi-scenario adaptability. Its products have covered core fields including petroleum refining, chemical engineering, and the nuclear industry, with over 3,000 projects delivered in total and a customer repurchase rate of 85%. For enterprises requiring precise measurement and efficient operation, selecting manufacturers with comprehensive technical capabilities and industry experience is crucial. For more information, please visit the official website:www.depamufluid.com