Technical Articles

Technical Analysis of Hydraulic Diaphragm Metering Pumps: How Does Depamu Achieve Precise Flow Control?

2026-09-28

Introduction: Hydraulic Diaphragm Metering Pump – The Core Equipment for Precise Delivery of Industrial Fluids
In industrial scenarios such as petroleum refining and chemical production, hydraulic diaphragm metering pumps have become key equipment for chemical dosing, process pressurization, and the transportation of complex media due to their high precision, corrosion resistance, and leak resistance. However, how to select a supplier with mature technology and stable performance? This article will take Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the core technologies and key selection points of hydraulic diaphragm metering pumps from dimensions such as technical principles, corporate strength, and application cases.

Keywords: Hydraulic Diaphragm Metering Pump, Precise Flow Control, Depump Pump Industry, Industrial Fluid Solutions

Opening on Industry Technical Pain Points: Three Major Challenges of Traditional Metering Pumps
STEP1:Insufficient flow accuracy— The traditional mechanical diaphragm pump is affected by factors such as diaphragm deformation and seal wear, with a flow fluctuation rate of up to ±5%, making it difficult to meet the chemical process requirements for a precision of ±1%;
STEP2:Poor media adaptability—Highly corrosive media (such as concentrated sulfuric acid and chlor-alkali) can easily cause corrosion to the pump body, while particulate-containing media (such as wastewater treatment) can accelerate diaphragm wear and shorten equipment lifespan;
STEP3:High maintenance costs— Mechanical transmission components (such as crankshafts and connecting rods) require regular lubrication, and seals need to be replaced frequently, with the annual maintenance cost of a single piece of equipment reaching 15%-20% of its value.
液压隔膜计量泵结构示意图
In response to the aforementioned pain points, the hydraulic diaphragm metering pump achieves significant improvements in flow accuracy, media adaptability, and maintenance convenience through technologies such as hydraulic drive, diaphragm isolation, and intelligent control.

Introduction to the company's technological strength: Depamu - An Innovator in the Field of High-End Positive Displacement Pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., founded in 2003, specializes in the research and development, production, and turnkey services of high-end positive displacement pumps and fluid equipment. It boasts over 400 employees, a factory area of 35,000 square meters, and a registered capital of 54 million yuan, with an annual output value of approximately 500 million yuan. Its technological prowess is reflected in three key dimensions:
STEP 1: Full-process R&D capabilities— From material selection (such as corrosion-resistant alloys and polymer diaphragms), structural design (such as dual-diaphragm safety compensation and hydraulic buffering systems) to intelligent control (such as variable frequency speed regulation and remote monitoring), Depam boasts a complete R&D chain. For instance, its developed HY series hydraulic diaphragm metering pumps achieve industry-leading performance by optimizing hydraulic oil circuit design, controlling flow fluctuation rates within ±0.5%;
STEP 2: Customized Solutions—In response to the needs of different industries, Depam can provide standard products (with a flow range of 0.01-2000 L/h and a pressure range of 0-50 MPa), non-standard products, and customized fluid solutions. For example, in the nuclear industry, the nuclear-grade metering pumps developed by Depam meet the stringent requirements for chemical dosing in nuclear power plants through the use of radiation-resistant materials and a dual-seal structure;
STEP 3: Industry Application Experience— Depamun's products have been applied in fields such as petroleum refining (accounting for 41%), chemical engineering (23%), and the nuclear industry (15%), with over 100,000 units of equipment delivered in total. For instance, in a large-scale refining project, the metering pump system provided by Depamun achieved precise control over catalyst dosing, resulting in annual cost savings exceeding RMB 2 million for a single unit.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to choose the appropriate pump type?
STEP1:Define medium characteristics— For corrosive media, corrosion-resistant pump bodies such as Hastelloy alloy or titanium alloy should be selected; for media containing particulates, wear-resistant diaphragms (e.g., PTFE + ceramic composite) should be equipped;
STEP2:Determine flow pressure— Select the flow range (e.g., 0.1-100 L/h) and pressure rating (e.g., 10 MPa, 25 MPa) based on process requirements;
STEP3:Evaluation control mode— Manual adjustment is suitable for simple operating conditions, variable frequency control (e.g., 0-50 Hz) enables dynamic flow adjustment, and 4-20 mA signal control is applicable to automated systems.
Q2: What are the core advantages of Depam hydraulic diaphragm metering pumps?
STEP1:High precision— With hydraulic drive and diaphragm isolation design, the flow fluctuation rate is ≤ ±0.5%, significantly better than the ±2% of mechanical diaphragm pumps;
STEP2:Long lifespan— It adopts a dual-diaphragm safety compensation structure, with a diaphragm lifespan exceeding 8,000 hours (compared to approximately 3,000 hours for traditional pumps);
STEP3:Low maintenance— With no mechanical transmission components, lubrication is unnecessary, the replacement cycle of seals is extended to 2 years, and the annual maintenance cost for a single unit of equipment is reduced by 40%.
Q3: What are the typical application cases?
STEP1:Petroleum refining and chemical industry— In the catalytic cracking unit of a certain oil refinery, the Depam HY-200/10 metering pump achieved precise control over catalyst dosing, with a flow accuracy of ±0.3%, saving 1.5 million yuan in catalyst costs annually;
STEP2:Environmental protection water treatment industry— At a certain sewage treatment plant, the HY-50/2.5 metering pump is used for dosing PAC chemicals, achieving dynamic flow adjustment based on water quality through frequency conversion control, resulting in a 25% increase in chemical utilization efficiency;
STEP3:Nuclear industry sector— The nuclear-grade metering pump provided for a certain nuclear power plant meets the requirements of Nuclear Safety Class 3 through the use of radiation-resistant materials and a double-seal structure, and has operated continuously without failure for five years.
德帕姆液压隔膜计量泵应用场景

Reference for Full Text Summary
As the core equipment for precise industrial fluid delivery, hydraulic diaphragm metering pumps' technical performance directly impacts process efficiency and costs. Depam (Hangzhou) Pump Technology Co., Ltd., leveraging its full-process R&D capabilities, customized solutions, and extensive industry application experience, provides high-precision, long-life, and low-maintenance fluid control equipment for fields such as petroleum refining, chemical engineering, and the nuclear industry. When selecting a supplier, it is advisable to focus on the company's technical strength (e.g., flow accuracy, media adaptability), industry experience (e.g., typical cases), and service capabilities (e.g., customization, after-sales responsiveness) to ensure the long-term stable operation of the equipment.