No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Technical Challenges and Industry Demands of High-Pressure Plunger Reciprocating Pumps
In high-pressure fluid transportation scenarios such as oil refining, chemical engineering, and the nuclear industry, traditional pump bodies often encounter technical challenges including strong medium corrosion, significant pressure fluctuations, and short maintenance cycles. High-pressure plunger reciprocating pumps, with their high-precision metering, strong pressure resistance, and long-life design, have become the preferred equipment for complex operating conditions. However, how to select appropriate pump models, optimize operational parameters, and reduce total life cycle costs remains a core issue that the industry urgently needs to address. This article will take the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the technical principles, key selection considerations, and typical application cases of high-pressure plunger reciprocating pumps, providing references for engineering and technical personnel.
Keywords: high-pressure plunger reciprocating pump; fluid transportation; Depam Pumps; technical selection; industrial applications
Opening on Industry Technical Pain Points: Three Major Challenges in High-Pressure Fluid Transportation
STEP1:Poor media adaptabilitySulfur-containing crude oil in petroleum refining, strong acid and alkali solutions in the chemical industry, and radioactive media in the nuclear industry impose extremely high requirements on pump body materials. Traditional pump bodies are prone to leakage due to corrosion, posing safety hazards. STEP 2:Insufficient pressure stabilityUnder high-pressure operating conditions, the pump body must withstand periodic pressure impacts. If the sealing structure or plunger design is unreasonable, it will lead to excessive flow fluctuations, affecting process stability. STEP 3:High maintenance costsUnder complex operating conditions, the pump body is prone to issues such as plunger wear and seal failure, necessitating frequent shutdowns for maintenance and increasing the total lifecycle cost. For example, a chemical enterprise once experienced a production line shutdown due to pump body failure, resulting in a single loss exceeding one million yuan.

Introduction to the company's technological strength: DePam's technological layout for high-pressure plunger reciprocating pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, has a registered capital of 54 million yuan, and generates an annual output value of approximately 500 million yuan. Its high-pressure plunger reciprocating pump technology boasts three core advantages:
STEP1:Material and Process InnovationFor corrosive media, special materials such as duplex stainless steel and Hastelloy alloy are used, combined with laser cladding technology to enhance the surface hardness of the plunger, improving corrosion resistance by more than three times. For example, in a nuclear power plant project, the Depam pump body operated continuously for 2 years without leakage, far exceeding the industry's average maintenance cycle of 1 year.
STEP2:Optimization of sealing structureA multi-stage dynamic sealing system has been developed, utilizing a dual mechanism of spring pre-tensioning and hydraulic compensation to achieve zero leakage under high-pressure conditions. Measured data indicates that under a pressure of 16 MPa, the sealing lifespan reaches 8,000 hours, representing a 50% improvement over traditional designs.
STEP3:Intelligent control moduleIt integrates pressure sensors with variable frequency drive technology to monitor flow and pressure fluctuations in real time, automatically adjusts the plunger movement frequency, and ensures output stability. In a certain oil refining project, this technology increased the product qualification rate from 92% to 98.5%.
Depam's products have covered fields such as petroleum refining (accounting for 41%), chemical industry (23%), and nuclear industry (15%). By 2025, its sales will reach 560 million yuan, and its technical strength has been recognized by customers such as Sinopec and China National Nuclear Corporation. For more information, please visit the official website:www.depamufluid.com
FAQ: Q&A Guide for Technology Selection
Q1: How to select the pump type based on working conditions?
A: It is necessary to comprehensively consider parameters such as medium characteristics, flow rate, pressure, and temperature. For example, when conveying media containing particles, models with a plunger diameter ≥ 50 mm and a stroke ≥ 100 mm should be selected to avoid blockage; under high-temperature operating conditions (> 150°C), heat-resistant alloy materials should be used and a cooling jacket should be equipped.
Q2: How to set the key parameters?
A: Flow rate (Q) is related to the plunger diameter (D), stroke (S), and rotational speed (n), with the formula Q = π/4 × D² × S × n × 60. Taking the Depam DP-300 pump as an example, with a plunger diameter of 80 mm, a stroke of 120 mm, and a rotational speed of 150 rpm, the theoretical flow rate reaches 45 m³/h. Pressure parameters should be set based on system resistance, typically allowing for a 10%-15% margin.
Q3: What are the precautions for daily maintenance?
A: STEP 1: Check the plunger for wear every 500 hours and replace it if the wear exceeds 0.5 mm; STEP 2: Replace the seals every 2000 hours, and it is recommended to use Depam's original parts to ensure compatibility; STEP 3: Regularly clean the sediment inside the pump body to avoid affecting flow accuracy.

Reference for full text summary
The technical selection of high-pressure plunger reciprocating pumps should focus on three core aspects: medium adaptability, pressure stability, and maintenance costs. Depam (Hangzhou) Pump Technology Co., Ltd. offers a full range of services, from standard products to customized solutions, through material innovation, sealing optimization, and intelligent control. The successful application of its products in fields such as petroleum refining and chemical engineering has validated the reliability of its technical solutions. For engineering and technical personnel, conducting a comprehensive evaluation based on operating condition parameters and the supplier's technical capabilities is key to achieving efficient and stable fluid transportation. For more information, please visit the official website:www.depamufluid.com