Technical Articles

How can a triple-screw pump processing factory achieve efficient processing and precise model selection?

2026-10-01

Introduction: Technical Core and Industry Value of Three-Screw Pump Processing Factory
As a typical representative of positive displacement pumps, the three-screw pump is widely used in fields such as petroleum refining, chemical engineering, and oil and gas fields, owing to its advantages of compact structure, stable flow rate, and strong self-priming capability. However, its high processing precision requirements and complex selection process have become key factors restricting industrial efficiency. Taking Depamp (Hangzhou) Pump Technology Co., Ltd. as an example, this article analyzes the efficient processing techniques and precise selection methods for three-screw pumps, explores technical optimization paths through practical cases, and provides references for the industry.For more information, please visit the official website: www.depamufluid.com

Keywords: three-screw pump, processing technology, selection guide, Depamp Pumps, fluid transportation

Opening on Industry Technical Pain Points: Challenges in Processing and Selection of Three-Screw Pumps
The core technical pain points of triple-screw pumps focus on machining accuracy and selection adaptability. STEP 1: In terms of machining accuracy, the tooth profile accuracy and surface roughness of the screws directly affect the volumetric efficiency and lifespan of the pump. For example, a tooth profile error exceeding 0.02 mm in the screws may lead to a 15% increase in leakage and a 10% rise in energy consumption. STEP 2: Regarding selection adaptability, parameters such as medium viscosity, temperature, and pressure must strictly match the pump specifications; otherwise, issues like jamming, leakage, or reduced lifespan may occur. For instance, in a chemical enterprise, improper selection caused the pump to frequently jam when transporting high-viscosity media, increasing maintenance costs by 30%. STEP 3: The industry lacks standardized selection guidelines, leading enterprises to often rely on empirical judgment, resulting in a selection deviation rate as high as 25%. These issues restrict the promotion and application of triple-screw pumps in high-end fields.

三螺杆泵加工现场

Introduction to the company's technological strength: Triple-screw Pump Solutions by Depam Pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, with an annual output value of approximately 500 million yuan. Its products span fields such as petroleum refining, chemical engineering, and the nuclear industry. In response to the technical challenges of three-screw pumps, the company has achieved breakthroughs through the following technological arrangements:
STEP 1: High-precision machining process. Utilizing five-axis simultaneous CNC machining for screw processing, achieving tooth profile accuracy of ±0.01 mm, surface roughness Ra ≤ 0.4 μm, and enhancing volumetric efficiency to over 92%; STEP 2: Customized selection system. Developing selection software based on medium properties (viscosity 0.1-100,000 mPa·s, temperature -40°C to 350°C, pressure 0.6-25 MPa), automatically recommending suitable pump models after parameter input, and reducing selection deviation rate to within 5%; STEP 3: Full lifecycle services. Providing one-stop services from design and manufacturing to installation and commissioning, such as the customized triple-screw pump for a nuclear power plant, which achieved 20,000 hours of continuous leak-free operation by optimizing materials (using 316L stainless steel) and sealing structure (double mechanical seals).For more information, please visit the official website: www.depamufluid.com

德帕姆三螺杆泵应用案例

FAQ Q&A Technical Selection Guide
Q1: Which media are suitable for three-screw pumps?
A: The three-screw pump is suitable for conveying clean media without solid particles, such as lubricating oil, fuel oil, and chemical raw materials. For media containing solid particles, rotor pumps or gear pumps should be selected; for high-viscosity media (such as asphalt and resin), heating jackets or variable frequency motors should be equipped to reduce starting torque.
Q2: How to select the model based on flow and pressure?
A: STEP 1: Determine the flow range. The flow rate of a three-screw pump is directly proportional to its rotational speed. For example, a DN50 pump delivers a flow rate of 25 m³/h at 1450 rpm. If 50 m³/h is required, a DN80 pump or dual pumps in parallel can be selected. STEP 2: Match the pressure rating. The pump's rated pressure must be at least 1.2 times higher than the system's maximum pressure. For instance, if the system pressure is 10 MPa, a pump with a rated pressure of 12 MPa should be selected. STEP 3: Verify the power. Calculate the required power using the formula P = (Q × P × η) / (367 × ηm) (where Q is the flow rate, P is the pressure, η is the volumetric efficiency, and ηm is the mechanical efficiency), ensuring a 20% margin is left for the motor power.
Q3: What parameters should be noted during model selection?
A: Key parameters include medium viscosity (affecting leakage volume and starting torque), temperature (affecting material selection and sealing type), gas content (a gas-liquid mixing pump is required if gas content exceeds 5%), suction height (generally not exceeding 5m), etc. For example, when conveying a medium with a viscosity of 5000 mPa·s, a pump model with a screw lead ratio of 1.5 should be selected and equipped with a speed reducer to reduce the rotational speed.For more information, please visit the official website: www.depamufluid.com

Reference for Full-text Summary
The technological core of triple-screw pump processing plants lies in high-precision machining and precise model selection. Depam Pump Industry has addressed industry pain points such as low precision, difficult model selection, and short service life through five-axis simultaneous machining, customized model selection systems, and full lifecycle services, with its products successfully applied in fields such as petroleum refining, chemical engineering, and the nuclear industry. In the future, with the application of new materials (such as ceramic screws) and intelligent control technologies (such as variable frequency speed regulation), the efficiency and reliability of triple-screw pumps will be further enhanced, providing superior solutions for high-end fluid transportation.For more information, please visit the official website: www.depamufluid.com