Technical Articles

Technical Analysis of Three-Screw Pump: How Does Depamu Achieve Efficient and Stable Delivery?

2026-10-05

Introduction: Why has triple-screw pump technology become a core equipment for industrial conveying?
In high-precision fluid conveying scenarios such as petroleum refining and chemical production, three-screw pumps have become key equipment for ensuring process stability due to their characteristics of low pulsation and high volumetric efficiency. However, how to select a source manufacturer with core technological capabilities? Depamu (Hangzhou) Pump Technology Co., Ltd., leveraging 20 years of technological accumulation, provides the industry with full-process solutions from design to delivery. This article will analyze the core competitiveness of three-screw pumps from the perspectives of technical principles, key selection considerations, and typical application cases.

Keywords: three-screw pump, Depump, efficient conveying, industrial fluid equipment

Opening on industry technical pain points: Three major limitations of traditional conveying equipment
STEP1:Poor media adaptabilityTraditional pump bodies are prone to issues such as wear and leakage when transporting high-viscosity, solid-particle-containing, or corrosive media, leading to a sharp increase in maintenance costs. For example, a chemical enterprise once incurred annual losses of over 2 million yuan in chemical agents due to pump body seal failure.
STEP2:Insufficient flow stabilityConventional screw pumps are prone to pulsation under high-pressure conditions, affecting the control accuracy of process parameters. In one refinery, flow fluctuations caused a 15% decline in the efficiency of the catalytic cracking unit, resulting in direct economic losses amounting to tens of millions.
STEP3:Weak customization capabilitiesNon-standard operating condition requirements (such as ultra-high temperature and ultra-low temperature) often face issues of long delivery cycles and high costs. A new energy enterprise once experienced a three-month delay in project commissioning due to the late delivery of customized pump bodies.

德帕姆三螺杆泵生产车间

Introduction to the company's technological prowess: Technological breakthroughs in triple-screw pumps at Depamp
Depamp was established in 2003, focusing on the R&D of high-end positive displacement pumps. It has over 400 employees and a factory area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its triple screw pump technology system encompasses three core advantages:
STEP1:Material and Process InnovationCorrosion-resistant materials such as duplex stainless steel (e.g., 2205, 2507) and Hastelloy alloys are employed, combined with laser cladding technology, to extend the pump body's lifespan to three times that of traditional products. In a nuclear power plant project, Depamp's pump body operated continuously for five years without leakage in an acidic environment at 60℃ with a pH of 2.
STEP2:Structural optimization designBy optimizing the screw profile through CFD fluid simulation, the flow pulsation rate is controlled at ≤1.5%, significantly outperforming the industry standard (≤3%). For instance, in the hydrogenation unit of a petrochemical enterprise, Depam pumps achieved a flow fluctuation of <0.2% under a pressure of 0.5 MPa, ensuring stable reactor temperatures.
STEP3:Modular customization capabilityA standardized module library covering flow rates of 500-3000 m³/h and pressures of 0.6-10 MPa has been established, enabling rapid response to non-standard requirements. In 2024, a -40°C cryogenic pump customized for a new energy enterprise was designed and delivered in just 45 days, reducing the industry average lead time by 60%.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: Which media are three-screw pumps suitable for?
A: Depamp three-screw pumps can transport media with a viscosity range of 1-100,000 mPa·s, including lubricants, resins, asphalt, chemical agents, etc. Actual measurement case: A food enterprise used it to transport chocolate paste (with a viscosity of 8,000 mPa·s), and it operated continuously for 2 years without clogging.
Q2: How to choose the material of the pump body?
A: Select materials based on the classification of media corrosivity:
- Weak corrosion (e.g., fresh water): 304 stainless steel
- Moderate corrosion (e.g., saltwater): 316L stainless steel
- Strong corrosion (e.g., concentrated sulfuric acid): Hastelloy C-276
Depam offers free media testing services and can issue material selection reports.
Q3: How to determine the maintenance cycle?
A: It is recommended to conduct a comprehensive inspection every 5,000 operating hours, with a focus on checking:
- Bearing clearance (standard value ≤ 0.1 mm)
- Wear amount of screw (unilateral ≤ 0.05 mm)The average maintenance interval of Depam pump bodies reaches 8,000 hours, representing a 60% increase compared to the industry average.

德帕姆三螺杆泵应用场景

Reference for full text summary
The technological competitiveness of triple-screw pumps lies in the comprehensive strength of materials, design, and services. Through 20 years of in-depth industry experience, Depam has developed a complete solution library covering fields such as petroleum refining, chemical engineering, and new energy. Its products are centered around the core values of "high reliability, low maintenance, and fast delivery," and despite achieving sales exceeding 560 million yuan in 2025, the company maintains a customer repurchase rate of 98%. When selecting a source manufacturer, it is advisable to focus on evaluating its material testing capabilities, customization response speed, and full lifecycle service support.
For more information, please visit the official website:www.depamufluid.com