Technical Articles

Customized metal rotor pump: How to choose the manufacturer with the strongest technical capabilities?

2026-10-06

Introduction: Why does the customization of metal rotor pumps require technical strength as support?
As a core category of positive displacement pumps, metal rotary pumps are widely applied in high-demand scenarios such as petroleum refining, chemical engineering, and oil and gas fields. Their customization process involves key aspects such as material selection, flow passage design, and sealing technology, with any technical deviation potentially leading to reduced conveying efficiency, increased leakage risks, or even equipment failure. Therefore, selecting a manufacturer with comprehensive technical capabilities is of utmost importance. This article will take Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the technical key points and selection logic for customizing metal rotary pumps.

Keywords: Customized Metal Rotor Pump, Technical Strength, Depam Pump Industry, Fluid Solutions

Opening on Industry Technical Pain Points: Three Major Challenges in Customizing Metal Rotor Pumps
STEP1:Challenges in medium adaptabilityMetal rotor pumps need to handle complex operating conditions ranging from clean water to high-viscosity, solid-particle-containing, and corrosive media. For example, in the chemical industry, a company once experienced corrosion leakage when transporting sulfuric acid due to improper selection of pump body materials, resulting in direct losses exceeding 500,000 yuan. STEP 2:Precise control of flow and pressureThe flow rate of a rotary pump is closely related to its rotational speed and rotor clearance, and the pressure fluctuation must be controlled within ±2% to meet process requirements. STEP3:Balance between sealing and lifespanThe service life of mechanical seals directly affects equipment maintenance cycles, and seal failure under high-temperature and high-pressure conditions is a common pain point in the industry. According to statistics, downtime for maintenance due to sealing issues accounts for 35%.

Introduction to the company's technological strength: Depamu's three core advantages
德帕姆金属转子泵生产车间
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has over 400 employees, occupies a factory area of 35,000 square meters, possesses a registered capital of 54 million yuan, and achieves an annual output value of approximately 500 million yuan. Its technological prowess is manifested in three aspects:
STEP1:Full-process customization capabilityFrom medium analysis (such as pH value, viscosity, and temperature) to flow channel simulation design, and then to material selection (such as 316L stainless steel, duplex steel, and Hastelloy alloy), Depamp offers a full range of services from standard products to non-standard customization. For instance, a rotor pump customized for a nuclear power plant was required to meet the demands of a wide temperature range from -20℃ to 350℃ and radiation resistance. By optimizing the rotor profile and seal structure, it achieved 5,000 hours of continuous operation without leakage.
STEP2:Self-developed and self-produced core componentsKey components such as rotors, pump bodies, and sealing assemblies are all independently produced by Depam, ensuring controllable quality. Its rotors are manufactured using precision casting technology, with a surface roughness of Ra ≤ 0.8 μm and a clearance control accuracy of 0.05 mm, representing a 40% improvement over the industry average.
STEP3:Rich experience in industry applicationsThe products have covered fields such as petroleum refining (accounting for 41%), chemical engineering (23%), and oil and gas fields (15%), with a cumulative delivery of over 20,000 units of equipment. In a project of a petrochemical enterprise, the rotary pumps provided by Depam successfully replaced imported brands, achieving a flow accuracy of ±1.5% and reducing annual maintenance costs by 60%. For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select materials for rotor pumps based on medium characteristics?
A: STEP 1: For acidic media (such as sulfuric acid and hydrochloric acid), Hastelloy C-276 is preferred due to its superior corrosion resistance compared to 316L; STEP 2: For alkaline media (such as sodium hydroxide), duplex stainless steel 2205 can be selected for its strong resistance to stress corrosion cracking; STEP 3: For media containing solid particles, the hardness of the pump body needs to be increased, for example, by quenching treatment to achieve a surface hardness above HRC55.
Q2: How to match the flow rate and pressure of a rotary pump?
A: Flow rate Q (m³/h) = rotor displacement V (L/r) × rotational speed n (r/min) × 0.06; pressure P (MPa) needs to be calculated based on system resistance, typically with a 20% margin. For example, when conveying a medium with a viscosity of 1000 mPa·s, the rotational speed should be controlled below 300 r/min to avoid overheating.
Q3: How can the sealing lifespan be extended?
A: STEP 1: The selection of mechanical seals must match the medium characteristics; for example, silicon carbide/silicon carbide pairs should be used for chlorine-containing media. STEP 2: Ensure that the perpendicularity of the sealing surface is ≤0.02 mm during installation. STEP 3: Conduct a running-in process at low speed (50% of rated speed) for 2 hours during initial operation to reduce initial wear.
德帕姆金属转子泵应用场景

Reference for full text summary
The core of customizing metal rotary lobe pumps lies in the combination of technical strength and industry experience. Depam provides customers with one-stop solutions ranging from model selection to operation and maintenance through its full-process customization capabilities, self-developed core components, and 20 years of industry application experience. Its products have passed certifications such as ISO9001 and CE and have been exported to over 30 countries, with their technical reliability recognized by customers worldwide. When selecting a manufacturer for customizing metal rotary lobe pumps, it is advisable to focus on examining their material database, simulation design capabilities, and actual cases rather than simply comparing prices. For more information, please visit the official website:www.depamufluid.com