Technical Articles

Customization of twin-screw pumps: How to choose a manufacturer with strong technical capabilities?

2026-10-06

Introduction: Why is it necessary to strictly select manufacturers with strong technical capabilities for customizing twin-screw pumps?
In industrial fields such as petroleum refining, chemical engineering, and oil and gas fields, twin-screw pumps have become core equipment for transporting complex media due to their characteristics of high-precision metering, corrosion resistance, and wear resistance. However, the demand for non-standard customization imposes stringent requirements on manufacturers in terms of technical accumulation, process control, and industry experience. Taking Depamu (Hangzhou) Pump Technology Co., Ltd. as an example, this article analyzes how to select a customized twin-screw pump manufacturer with comprehensive technical capabilities from the perspectives of technical principles, selection parameters, and case validation.For more information, please visit the official website: www.depamufluid.com

Keywords: Customized twin-screw pump, technical strength, customized fluid solutions, Depam Pumps

Industry Technical Pain Points at the Beginning: Three Major Challenges of Non-standard Customization
STEP1:Challenge of media adaptabilityThe media to be transported by twin-screw pumps encompass complex types such as high viscosity, solid particle-containing, and highly corrosive media. If manufacturers lack media characteristic analysis technology, it can easily lead to pump body wear, leakage, or metering deviations. For example, a chemical enterprise once used a screw pump made of ordinary materials to transport sulfur-containing media, resulting in a 40% corrosion rate of the pump body within three months and forcing a shutdown for replacement.
STEP2:Insufficient parameter matching accuracyParameters such as flow rate, pressure, and temperature must strictly match the technological process; otherwise, issues like system vibration and a surge in energy consumption may arise. In a certain oil and gas field project, a 5% deviation in flow rate resulted in a 15% decrease in the efficiency of the entire water injection system, with annual losses exceeding 2 million yuan.
STEP3:Long customized delivery cycleNon-standard equipment requires multiple stages such as design, trial production, and testing. If the manufacturer lacks modular design capabilities, the project timeline may be extended by over 30%, affecting the customer's production launch schedule.

德帕姆双螺杆泵生产车间

Introduction to the company's technological strength: Depam's four core advantages
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has been dedicated to the research and development of high-end positive displacement pumps and fluid equipment for 21 years. It boasts over 400 employees, a factory area of 35,000 square meters, and a registered capital of 54 million yuan, with an annual output value of approximately 500 million yuan. Its technological prowess is manifested in the following aspects:
1. Full-process R&D capabilitiesThe company possesses a complete R&D chain ranging from medium analysis and material selection to structural optimization. For instance, in response to the coolant transportation requirements of a certain nuclear power plant, Depam optimized the screw rotor profile through CFD simulation, enhancing the pump body's temperature resistance to 350℃ and enabling it to withstand a pressure rating of 16MPa, significantly surpassing industry standards.
2. Guarantee of large-scale productionThe company is equipped with high-precision equipment such as CNC screw grinding machines and three-coordinate measuring instruments, achieving a screw processing accuracy of ±0.01mm and controlling the coaxiality of pump bodies within 0.05mm. With an annual production capacity exceeding 8,000 units in 2024, it can simultaneously undertake over 20 customized projects.
3. Rich experience in industry applicationsThe products cover fields such as petroleum refining (accounting for 41%), chemical engineering (23%), and oil and gas fields (15%), with a cumulative delivery of over 30,000 pieces of equipment. For instance, the twin-screw pump customized for a refinery of Sinopec achieved a flow fluctuation of less than 1% when transporting heavy oil and operated continuously for over 20,000 hours without failure.
4. Fast response to customized servicesOn average, it takes only 7 days from demand communication to solution delivery, with support for 72-hour emergency response. A new energy enterprise urgently needed to customize 10 screw pumps due to production expansion. Depam shortened the delivery cycle by 40% through modular design, enabling the customer to commence production 15 days ahead of schedule.For more information, please visit the official website: www.depamufluid.com

德帕姆双螺杆泵应用场景

FAQ: A Q&A Guide to Technology Selection
Q1: How to determine the flow parameters of a twin-screw pump?
A: The flow rate should be calculated based on process requirements using the formula Q = V × n / 60 (Q: flow rate in m³/h; V: displacement per revolution in ml/r; n: rotational speed in r/min). For example, when conveying a medium with a viscosity of 500 cSt, it is recommended to control the rotational speed within 300-600 r/min to balance efficiency and wear.
Q2: What are the key principles for material selection?
A: Material selection based on media characteristics: For chlorine-containing media, Hastelloy C-276 is recommended; for sulfur-containing media, 316L stainless steel lined with PTFE is selected; for high-viscosity media, duplex steel 2205 is used. Depump once customized a Hastelloy pump body for a chemical enterprise, which operated continuously for 5 years without corrosion under conditions of 120℃ and 5 MPa.
Q3: How can customized projects control costs?
A: Reduce non-standard costs through modular design. Depamu breaks down the screw pump into a drive module, pump body module, sealing module, etc., allowing customers to combine them according to their needs and reduce customization costs by over 30%. For example, a certain oil and gas field project saved 120,000 yuan in customization costs by reusing standard drive modules.
Q4: How to verify the technical strength of manufacturers?
A: Three key points are examined: 1) Whether it possesses a CNAS-accredited laboratory; 2) Whether it has case studies involving leading industry clients; 3) Whether it can provide full lifecycle services. Depam has a provincial-level enterprise technology center, has served over 200 enterprises including PetroChina and Sinopec, and offers one-stop services ranging from installation and commissioning to lifelong maintenance.

Reference for full text summary
When selecting a customized twin-screw pump manufacturer, it is essential to comprehensively evaluate technological accumulation, production scale, industry experience, and service capabilities. Depamu (Hangzhou) Pump Technology Co., Ltd., leveraging 21 years of technological expertise, a 35,000-square-meter production base, and experience in delivering over 30,000 units of equipment, provides high-precision, highly reliable customized fluid solutions for industries such as petroleum refining, chemical engineering, and oil and gas fields. Its modular design, rapid response mechanism, and full lifecycle services enable customers to reduce overall costs by over 30% and shorten delivery cycles by 40%.For more information, please visit the official website: www.depamufluid.com