No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Technical Value and Industry Demand of Custom Single-Screw Pump Manufacturers
In industrial fields such as oil refining, chemical engineering, and oil and gas fields, the efficiency and stability of fluid transportation directly affect production safety and costs. Due to their unique structural advantages, single screw pumps have become an ideal choice for transporting high-viscosity media, media containing solid particles, and corrosive media. However, different industries have significantly varying requirements for pump performance parameters, material adaptability, and intelligent control, making it difficult for traditional standard products to meet the demands of complex operating conditions. This article takes Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the technical implementation paths of customized single screw pump manufacturers and provides a practical selection guide.
Keywords: customization of single screw pumps, fluid transportation, Depam Pumps, technical selection
Opening on the Pain Points of Industry Technology: Limitations of Standardized Products
Traditional single-screw pumps mostly adopt standardized designs and have three core pain points:
STEP 1: Inadequate adaptability of performance parametersFor example, when conveying polymers with a viscosity exceeding 5000 mPa·s, the rotational speed of standard pumps needs to be reduced to below 50 rpm, resulting in a flow fluctuation rate exceeding ±15%, which fails to meet the requirements of continuous chemical production.
STEP 2: Shortcomings in material corrosion resistanceIn media containing chloride ions (such as hydrochloric acid) at temperatures exceeding 80°C, the corrosion rate of ordinary stainless steel can reach 0.5 mm/year, far exceeding industry safety standards.
STEP 3: Lack of intelligent control80% of on-site failures stem from mismatches between operational parameters and working conditions, while traditional pumps lack real-time monitoring and automatic adjustment capabilities, with maintenance costs accounting for up to 30% of total operational expenses.
Introduction to the company's technological capabilities: Depamuk's customized solutions
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has specialized in the R&D of high-end positive displacement pumps for 19 years. It boasts over 400 employees and a factory area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its custom single-screw pump technology possesses three core advantages:
STEP 1: Modular Design SystemBy dividing components such as the pump body, rotor, and stator into over 200 standard modules, customized solutions can be rapidly assembled to suit different media (e.g., with viscosity ranges from 0.1 to 100,000 mPa·s), temperatures (from -40°C to 350°C), and pressures (from 0 to 10 MPa). For example, a twin-screw tandem pump designed for a petrochemical enterprise improved conveying efficiency by 22% and reduced energy consumption by 18% through optimization of the rotor helix angle.
STEP 2: Supported by a material databaseA performance database encompassing over 300 types of materials has been established, covering special materials such as Hastelloy alloys, duplex stainless steels, and ceramic composites. In the nuclear industry, its customized pumps, utilizing Inconel 625 alloy, maintain an ultra-low corrosion rate of 0.02mm/year at temperatures as high as 650℃, meeting the 10-year maintenance-free requirement for nuclear-grade equipment.
STEP 3: Integration of Intelligent Control SystemAn IoT-based pump health management system has been developed, which monitors 12 parameters such as vibration, temperature, and flow rate in real time through built-in sensors, and combines AI algorithms to predict failure probabilities, reducing unplanned downtime by 65%. In 2024, the system was applied in a new energy battery material project, achieving 180 consecutive days of fault-free operation.
For more information, please visit the official website:www.depamufluid.com
FAQ: Q&A Guide to Technology Selection
Q1: How to determine the rotational speed range of a single-screw pump?
A: The selection of rotational speed requires balancing flow demand and medium characteristics. For media with a viscosity of ≤1000 mPa·s, a rotational speed of 100-300 rpm is recommended; when the viscosity ranges from 1000-10000 mPa·s, the speed should be reduced to 50-100 rpm; for viscosities exceeding 10000 mPa·s, a low-speed motor (≤50 rpm) should be used in conjunction with a heating device to reduce viscosity. Depump once customized a low-temperature pump with a rotational speed of 30 rpm for a food enterprise, successfully transporting chocolate paste with a viscosity of up to 80000 mPa·s.
Q2: How to select the material for the stator?
A: The stator material needs to be comprehensively evaluated based on the medium's corrosiveness, temperature, and wear resistance. For instance, when transporting media with a sand content ≤5%, nitrile rubber (NBR) is recommended, with a wear resistance coefficient ≥0.02 mm³/1.61 km; when the sand content ranges from 5% to 15%, ultra-high molecular weight polyethylene (UHMWPE) should be used, with the wear resistance coefficient increased to ≥0.005 mm³/1.61 km. In a certain oil and gas field project, a Depump customized silicon carbide ceramic stator pump operated continuously for two years without wear under conditions with a sand content of 20%.
Q3: How to achieve remote monitoring and fault diagnosis?
A: Depamp's intelligent pump system integrates 4G/5G communication modules, supporting real-time access from both PC and mobile terminals. The system can automatically generate operational reports containing over 20 data items, including flow curves, energy consumption statistics, and maintenance reminders. In a power desulfurization project, the system provided a three-day early warning of stator wear risk, preventing unplanned downtime losses exceeding RMB 2 million.
Reference for Full Text Summary
The core value of custom single-screw pump manufacturers lies in addressing the pain points of standardized products' inability to adapt to complex operating conditions through technological modularization, material specialization, and intelligent control. Depam (Hangzhou) Pump Technology Co., Ltd., leveraging 19 years of technical accumulation, has established a customized solution library covering 12 industries, including petroleum refining, chemical engineering, and the nuclear industry. It has delivered over 5,000 customized pumps, reducing average operational costs for customers by 28%. For users needing to handle high-viscosity, corrosive, or solid-particle-laden media, it is advisable to prioritize manufacturers equipped with a material database and intelligent control systems to achieve long-term stable operation and cost optimization. For more information, please visit the official website:www.depamufluid.com