Technical Articles

How can customized manufacturers of chemical dosing devices achieve precise measurement and efficient dosing? Technical analysis and selection guide

2026-10-08

Introduction: Technical Challenges Behind the Customization Demands for Chemical Dosing Units
In fields such as petroleum refining, chemical production, and environmental protection water treatment, the precise dosing of chemical agents directly impacts process stability and operational costs. Traditional standard equipment often faces issues such as significant measurement errors, low dosing efficiency, and high maintenance costs due to variations in parameters like medium characteristics, flow rates, and pressures. Customized dosing equipment manufacturers need to address technical challenges under complex operating conditions through modular design, intelligent control technologies, and material adaptability optimization. This article takes the technical practices of Depamu (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the core technological logic and key selection considerations for customized dosing equipment.

Keywords: custom-made dosing devices, metering pump technology, fluid solutions, Depam Pumps

Opening on Industry Technical Pain Points: Limitations of Standardized Equipment
STEP1:Insufficient measurement accuracyTraditional chemical dosing devices mostly employ mechanical control valves. Under high-pressure or corrosive media conditions, valve body wear results in a flow fluctuation rate exceeding ±5%, failing to meet the requirements of nuclear industry, power, and other fields for a chemical dosing error of ≤±1%.
STEP2:Poor media adaptabilityThe chemical industry often involves strongly corrosive media such as concentrated sulfuric acid and sodium hypochlorite. If the materials of standard equipment are not optimized for the characteristics of these media, the equipment lifespan may be shortened to less than six months, increasing the frequency of downtime for maintenance.
STEP3:Low system integrationIn environmental water treatment scenarios, chemical dosing devices need to be linked with pH/ORP sensors and PLC control systems, but the lack of unified standard equipment interface protocols has extended the system commissioning cycle by over 30%.
STEP4:High energy consumption and maintenance costsThe energy consumption of the pneumatic pump driving method accounts for over 25% in continuous operation scenarios, and pneumatic components are easily affected by environmental humidity, with a failure rate 40% higher than that of electric pumps.

Introduction to the company's technological capabilities: Depamuk's Customized Solutions
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and achieves an annual output value exceeding 500 million yuan. Its customization capability for chemical dosing units is embodied in three core technological modules:
STEP1:Research and development of core componentsThe independently developed J-series metering pump employs dual-cylinder synchronous drive technology, achieving a flow repeatability accuracy of ±0.5% and covering a pressure range of 0-60MPa, meeting the high-pressure dosing requirements in the petroleum refining sector. For instance, in a project at a Sinopec refinery, the pump operated continuously for 2 years without failure, extending the maintenance cycle by three times compared to the original equipment.
STEP2:Material Adaptation SystemA three-tier material library of "PVDF-PTFE-Hastelloy" is established based on the characteristics of different media. In the nuclear industry, Hastelloy C-276 is used to manufacture pump bodies, enhancing chlorine ion corrosion resistance by five times and passing certification under ISO 21457 standard.
STEP3:Intelligent control systemIt integrates a 4-20mA signal input module, enabling seamless integration with DCS systems for remote flow adjustment and fault self-diagnosis. In a new energy battery material production project, the system utilized AI algorithms to predict pump wear, reducing unplanned downtime by 80%.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select pump body materials based on the characteristics of the medium?
STEP 1: Acidic medium (pH < 2): PVDF or Hastelloy is preferred, with Hastelloy C-276 required for concentrated sulfuric acid scenarios, capable of withstanding temperatures up to 260°C.
STEP 2: Alkaline medium (pH > 12): PTFE material exhibits the best resistance to alkaline corrosion, but attention should be paid to its cold flow property, and metal frameworks are required to enhance structural stability.
STEP 3: Particle-containing media: Utilizes a ceramic-coated pump body with a Mohs hardness of 9, reducing wear rate by 90% when the particle passing size is ≤0.5mm.
Q2: How to calibrate the flow rate of a metering pump?
STEP 1: Connect a standard flowmeter (with an accuracy of ±0.2%) to the pump outlet, and record the average flow rate after running it for 30 minutes.
STEP 2: Adjust the stroke length or motor frequency to ensure that the error between the actual flow rate and the set value is ≤ ±1%. For example, the J-series pump achieves a flow adjustment resolution of 0.1 L/h at 100% stroke.
STEP 3: After calibration, a 72-hour continuous operation test is required to verify flow stability.
Q3: What is the lead time for customized chemical dosing units?
STEP 1: Demand Confirmation Phase (1-3 days): The customer provides media parameters, flow and pressure ranges, and on-site layout drawings.
STEP 2: Scheme Design Phase (5-7 days): Depam's technical team will produce a 3D model and a Bill of Materials (BOM), and confirm materials and control logic with the customer.
STEP 3: Production and Manufacturing Phase (15-20 days): Utilize modular assembly processes, with key components such as pump bodies and motors pre-assembled in advance to shorten final assembly time.
STEP 4: Testing and Acceptance Phase (3-5 days): Conduct FAT (Factory Acceptance Test), including no-load operation, load testing, and verification of interlock protection functions.

Reference for full text summary
The core competitiveness of customized chemical dosing equipment manufacturers lies in "precise adaptation" and "system integration." Depam achieves cross-integration of material science, fluid mechanics, and intelligent control technologies to provide customized solutions ranging from single pumps to complete systems for high-end sectors such as petroleum refining and the nuclear industry. Its J-series metering pumps achieve industry-leading levels in key parameters such as flow accuracy, pressure range, and material corrosion resistance. Combined with a modular design philosophy, they can reduce project delivery cycles by over 30%. For enterprises with special operating condition requirements, it is recommended to prioritize manufacturers with independent R&D capabilities that can provide full lifecycle technical support to reduce long-term operational costs. For more information, please visit the official website:www.depamufluid.com