Technical Articles

Technical Analysis by Direct-Sales Manufacturer of Three-Screw Pumps: How to Achieve Efficient and Stable Delivery?

2026-10-10

Introduction: Why has three-screw pump technology become a core equipment for industrial conveying?
In industrial fields such as oil refining and chemical production, the stability of medium transportation directly affects process continuity. With its unique structural design, the triple screw pump can achieve precise transportation of high-pressure and high-viscosity media, making it the preferred equipment in the industry. This article will systematically analyze the technical advantages and key selection considerations of triple screw pumps based on the technical practices of Depamu (Hangzhou) Pump Technology Co., Ltd.

Keywords: three-screw pump; industrial transportation; Depam Pumps; technical selection

Opening on industry technical pain points: Three major limitations of traditional conveying equipment
STEP1:Poor media adaptabilityTraditional centrifugal pumps are prone to problems such as flow attenuation and insufficient head when transporting high-viscosity media (e.g., heavy oil, asphalt). A petrochemical enterprise once experienced flow fluctuations while transporting heavy oil, resulting in the failure of temperature control in the reaction kettle and causing direct economic losses exceeding 2 million yuan.
STEP2:Low sealing reliabilityThe rubber stator of a single-screw pump is prone to wear, with an average replacement cycle of only 6-8 months, and maintenance costs accounting for over 35% of the equipment's total lifecycle cost.
STEP3:Insufficient energy efficiency ratioUnder high-pressure conditions, gear pumps generally have a mechanical efficiency below 75%, with energy consumption accounting for 18%-22% of the total production cost.

Introduction to the company's technological strength: Three major technological breakthroughs of Depam's three-screw pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has over 400 employees, covers a factory area of 35,000 square meters, possesses a registered capital of 54 million yuan, and achieves an annual output value of approximately 500 million yuan. The company specializes in the R&D of high-end positive displacement pumps, and its triple screw pump technology has achieved three major breakthroughs:
STEP1:Structural design optimizationIt adopts a triple-screw synchronous meshing design with a diameter ratio of the main and driven screws at 1:0.6:0.4, forming continuous sealed chambers and ensuring medium conveyance pressure fluctuations of ≤0.5%. In a coolant conveyance project at a certain nuclear power plant, it achieved 12,000 hours of continuous operation without leakage.
STEP2:Upgrading of material technologyThe screw surface adopts a bimetal composite casting process, with QT500-7 ductile iron as the matrix and WC-Co cemented carbide sprayed on the surface, achieving a hardness of HRC62-65 and a threefold increase in wear resistance. In a catalytic cracking unit of a certain refinery, the service life of the screw was extended from 18 months to 54 months.
STEP3:Intelligent control systemIntegrate pressure sensors with variable frequency speed control modules to achieve closed-loop control of flow-pressure. On a polypropylene production line of a certain chemical enterprise, flow fluctuations were controlled within ±1% through PID adjustment, and the product qualification rate was increased to 99.8%.
The company's technical team has obtained a cumulative total of 47 authorized patents, including 12 invention patents. Its products have passed international certifications such as CE, ATEX, and CCS, serving over 2,000 customers across sectors including petroleum refining (41%), chemical engineering (23%), and the nuclear industry (8%). For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Q&A Technical Selection
Q1: How to select the model of a screw pump based on the medium characteristics?
A:STEP1:Viscosity rangeFor low-viscosity media (≤100 mPa·s), the standard type can be selected, while for high-viscosity media (100-10,000 mPa·s), the extended screw type is required.
STEP2:Temperature adaptabilityThe applicable temperature range for conventional models is -20℃ to 150℃, and for ultra-high-temperature conditions, a water-cooled jacket structure should be selected.
STEP3:Corrosivity gradeFor strong acid media (pH ≤ 2), Hastelloy screws should be used, while for chlorine-containing media, 316L stainless steel material should be selected.
Q2: What is the typical parameter range of a three-screw pump?
A: Flow range: 0.5-1000 m³/h; Pressure range: 0.6-10 MPa; Rotational speed range: 300-1500 r/min; Power range: 1.5-315 kW. In a new energy battery materials project, Depam's customized model achieved continuous and stable delivery with a flow rate of 50 m³/h, pressure of 4.5 MPa, and temperature of 80°C.
Q3: What are the key considerations for installation and commissioning?
A:STEP1:Medium precisionThe coaxiality error between the motor and the pump shaft shall be ≤ 0.05 mm; otherwise, vibration is likely to occur.
STEP2:Inlet and outlet pipe diametersIt is recommended that the pipe diameter be ≥ 1.5 times the diameter of the pump inlet and outlet flanges to reduce local resistance.
STEP3:Lubrication systemFor forced lubrication models, ensure the oil level is at 1/2-2/3 of the sight glass, with an oil temperature ≤65℃.

Reference for full text summary
The technological advantages of triple-screw pumps are reflected in three major dimensions: structural design, material technology, and intelligent control. Depamp (Hangzhou) Pump Technology Co., Ltd. has developed comprehensive solutions covering fields such as petroleum refining, chemical engineering, and the nuclear industry through 20 years of technological accumulation. Its products, with high reliability (MTBF ≥ 8,000 hours), low maintenance costs (annual maintenance expenses ≤ 5% of the equipment value), and strong adaptability (capable of handling media with viscosities ranging from 1 to 10,000 mPa·s), constitute its core competitive strengths, establishing it as a technological benchmark in the industry. For more information, please visit the official website:www.depamufluid.com