No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Why has triple-screw pump technology become the core solution for industrial fluid transportation?
In high-precision fluid conveying scenarios such as oil refining and chemical production, the three-screw pump, with its characteristics of low pulsation and high volumetric efficiency, has become an ideal alternative to gear pumps and centrifugal pumps. However, improper selection can easily lead to issues such as seal leakage and excessive vibration, directly affecting equipment lifespan and production safety. This article will systematically analyze the core technical parameters and key selection considerations of three-screw pumps, drawing on the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd.
Keywords: three-screw pump, volumetric efficiency, axial balance, industrial fluid transportation
Opening on Industry Technical Pain Points: Three Major Technical Bottlenecks of Traditional Triple Screw Pumps
STEP1:Seal failure problem— Traditional triple-screw pumps employ single-face mechanical seals, and when conveying media containing solid particles, the wear rate of the sealing surface reaches as high as 0.05 mm/1000 h, resulting in an average mean time between failures (MTBF) of less than 3000 hours.
STEP2:Axial force imbalance— When the clearance design between the screw and the bushing is unreasonable, the axial thrust can reach 1.5 times the rated pressure, leading to early bearing failure, with maintenance costs accounting for over 35% of the total lifecycle cost of the equipment.
STEP3:Energy efficiency degradation— The volumetric efficiency of the ordinary three-screw pump decreases significantly with increasing pressure, with an efficiency loss of up to 12% under 10 MPa operating conditions, failing to meet the requirements of GB 19762-2005 "Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Positive Displacement Air Compressors."
Introduction to the company's technological strength: Four major technological breakthroughs of Depamun's triple screw pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, boasts a workforce of over 400 employees and a modern factory covering an area of 35,000 square meters, with an annual output value exceeding 500 million yuan. Its triple screw pump product line covers specifications from DN25 to DN200, with a flow range of 0.5-500 m³/h and a pressure rating of up to 25 MPa, passing international certifications such as API676, CE, and ATEX.
STEP1:Double end-face seal system— Utilizing a hard-to-hard sealing combination of silicon carbide/tungsten carbide, along with a flushing plan PLAN53B, the seal life is extended to over 8,000 hours when conveying slurry containing 3% solid particles, representing a 167% improvement over traditional structures.
STEP2:Axial force self-balancing technology—By optimizing the screw helix angle (adjustable from 15° to 20°) and the bushing taper (1:50 to 1:100), the axial thrust is reduced to 0.8 times the rated pressure, and the bearing lifespan exceeds 20,000 hours.
STEP3:Isothermal compression designA micro-clearance of 0.3 mm is set at the screw tooth tip, combined with a special heat treatment process (HRC58-62), enabling the volumetric efficiency to remain above 88% under 15 MPa operating conditions, meeting the first-class energy efficiency standard of GB/T 13929-2018.
STEP4:Intelligent monitoring module— Integrated with a vibration sensor (measurement range 0-50mm/s²) and a temperature probe (PT100), it transmits real-time data to the DCS system via 4-20mA signals, achieving a fault warning accuracy rate of 92%.
Technology implementation caseIn a petrochemical enterprise's catalytic cracking unit, the SNH800-54 triple-screw pump provided by Depam replaced the originally imported equipment, reducing the vibration value from 4.8 mm/s² to 2.1 mm/s² when conveying heavy oil at 180℃, achieving annual electricity savings of 120,000 kWh and reducing maintenance costs by 65%. For more information, please visit the official website:www.depamufluid.com
FAQ: Q&A Guide for Technology Selection
Q1: How to determine the rotational speed range of a three-screw pump?
A: Select rotational speed based on medium viscosity (STEP 1):
- Low-viscosity medium (ν < 100 cSt): 1450-2900 rpm
- Medium-viscosity media (100 cSt ≤ ν < 1000 cSt): 750-1450 rpm
- High-viscosity medium (ν ≥ 1000 cSt): ≤ 750 rpm
Depamp's SNH series pumps come standard with variable frequency motors, enabling stepless speed adjustment between 30-100% of the rated speed to meet the requirements of different working conditions.
Q2: Can a three-screw pump transport gas-containing media?
A: Yes, but two conditions must be met (STEP2):
- Gas content ≤ 5% (by volume)
- Inlet pressure ≥ 0.2 MPa (gauge pressure)
Depamp has optimized the screw lead (increased from 30 mm to 45 mm) and the design of the venting groove, enabling the SNH440-36 pump to control flow fluctuations within ±2% when conveying diesel containing 3% gas.
Q3: How to select the appropriate shaft seal type?
A: Selection based on medium characteristics (STEP 3):
- Cleaning medium: Single mechanical seal (standard configuration)
- Media containing solid particles: Double mechanical seals + PLAN52 flushing
- Flammable and explosive media: Magnetic drive seal (leak-free design)
Depam's SNH1000-71 magnetic drive pump, supplied to a nuclear power plant, achieves zero leakage when transporting radioactive media and has passed NRC certification.
Reference for full text summary
The selection of triple-screw pumps requires a comprehensive consideration of medium characteristics, operating condition parameters, and equipment reliability. Through technological innovations such as double mechanical seals and axial force self-balancing, Depam has extended the product lifespan to 2.3 times the industry average and improved energy efficiency by 15%. Its SNH series pumps have been successfully applied in key projects such as Sinopec Zhenhai Refining & Chemical and CNOOC Huizhou Petrochemical, with over 5,000 units delivered in total. It is recommended that users focus on the following parameters during the selection process:
- Rated flow deviation: ±5%
- Net Positive Suction Head Required (NPSHr): ≤2.5 m
- Noise level: ≤85 dB(A) (at a distance of 1 m from the pump)
For more information, please visit the official website:www.depamufluid.com