Technical Articles

Selection and Contact Guide for Three-Screw Pumps: Technical Analysis and Practical Suggestions from Depamp

2026-10-15

Introduction: Technical Value and Connection Requirements of Three-Screw Pumps
As a typical representative of positive displacement pumps, the triple-screw pump is widely applied in fields such as petroleum refining, chemical engineering, and new energy due to its compact structure, stable flow rate, and strong resistance to contamination. However, when faced with the challenge of selecting the right pump for complex operating conditions, users often find themselves confused about "how to match parameters" and "how to contact reliable suppliers." Based on the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd., this article provides a systematic solution covering technical principles, key selection considerations, and pathways to contact the enterprise, helping users efficiently complete equipment selection and procurement.

Keywords: triple-screw pump; selection guide; Depamu Pumps; technical parameters; contact routes

Introduction to Industry Technical Pain Points: Three Major Challenges in Selecting Triple Screw Pumps
STEP1:Challenge of parameter matchingParameters such as the flow rate (0.5-1000 m³/h), pressure (0.6-10 MPa), and medium viscosity (1-100000 cSt) of a three-screw pump must be precisely matched to the operating conditions; otherwise, it can easily lead to reduced efficiency or equipment damage. For example, a chemical enterprise experienced a 300% increase in screw wear rate and a shortened maintenance cycle to three months due to failing to consider the solid content in the medium.
STEP2:Insufficient technical capabilities of the supplierSome suppliers in the market lack the capability for non-standard customization and are unable to provide solutions tailored to special operating conditions such as high temperature, high pressure, and strong corrosion. A new energy enterprise was once compelled to use multiple pumps in parallel due to the technological limitations of its supplier, resulting in a 40% increase in system complexity and a 25% rise in energy consumption.
STEP3:Low efficiency in contact and after-sales serviceUsers often experience project delays due to slow supplier responses and poor technical communication. According to statistics, the project delay rate caused by inefficient supplier contact reaches as high as 18% in industrial equipment procurement.

德帕姆三螺杆泵应用场景

Introduction to the Company's Technological Strength: Depump's Technical Layout of Three-Screw Pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value of approximately 500 million yuan. Its triple screw pump technology boasts three core advantages:
STEP1:Full parameter coverage capabilityThe product has a flow range of 0.5-1000 m³/h, a pressure range of 0.6-10 MPa, is compatible with media viscosities of 1-100,000 cSt, and operates within a temperature range of -50°C to 350°C, meeting the extreme operating conditions in fields such as petroleum refining, chemical engineering, and the nuclear industry. For instance, a triple-screw pump supplied to a nuclear power plant has operated stably for over 5,000 hours under conditions of a medium temperature of 300°C and a pressure of 8 MPa.
STEP2:Non-standard customization and complete set servicesThe company possesses full-chain capabilities from R&D to delivery, and can provide standard products, customized non-standard solutions, and fluid system solutions based on medium characteristics (such as solid content and corrosiveness) as well as flow and pressure requirements. For a chemical enterprise with a medium containing 30% solid particles, Depam extended the equipment lifespan to twice the industry average by optimizing the screw material (using duplex stainless steel 2205) and gap design.
STEP3:Rapid Response and Technical SupportThe company has established a 400 customer service hotline and an online technical platform, committing to respond to inquiries within 2 hours and provide selection solutions within 48 hours. In 2024, customer satisfaction reached 98.7%, significantly surpassing the industry average. For more information, please visit the official website:www.depamufluid.com

FAQ: Q&A Technical Selection Guide
Q1: How to select the model of a three-screw pump based on working conditions?
STEP1:Define basic parametersIt is necessary to determine the flow rate (Q), pressure (P), medium viscosity (μ), temperature (T), and solid content (S). For example, a chemical project requires a flow rate of 200 m³/h, a pressure of 3 MPa, a medium viscosity of 500 cSt, a temperature of 150°C, and a solid content of 5%.
STEP2:Match pump types with materialsSelect the pump type (e.g., SNH series triple-screw pump) based on parameters and determine the material of key components. For operating conditions with a solids content of 5%, hard alloy screws should be used, and for a medium temperature of 150°C, a high-temperature sealing structure should be selected.
STEP3:Verify performance indicatorsBy inputting parameters into Depamu's online model selection system, the system automatically recommends the suitable model (e.g., SNH800-54) and outputs key data such as performance curves, efficiency values (≥75%), and NPSH values (≤2.5m).
Q2: What are the typical application cases of Depump's three-screw pumps?
STEP1:Petroleum refining industryProvided an SNH1600-125 triple-screw pump for a refinery, used for slurry oil transportation in the catalytic cracking unit, with a flow rate of 800 m³/h, pressure of 4 MPa, medium viscosity of 1000 cSt, operating continuously for 18 months without failure, and consuming 12% less energy than similar products.
STEP2:new energy sectorCustomized SNH200-21 triple-screw pump for a lithium battery material enterprise, used for electrolyte conveyance, with a flow rate of 50 m³/h, pressure of 1.5 MPa, and solid content in the medium of 0.1%. It adopts a PTFE sealing structure to meet high cleanliness requirements, and the product qualification rate has been increased to 99.9%.
Q3: How can I contact Depam for technical support?
STEP1:Online channels: Visit the official websitewww.depamufluid.comClick "Online Consultation" to submit your request, and the technical team will respond within 2 hours.
STEP2:Telephone consultationCall 400-800-1234, provide the operating condition parameters, and the customer service staff will transfer you to a dedicated technical engineer.
STEP3:On-site servicesFor complex projects, Depam can dispatch a technical team to conduct on-site inspections and provide customized solutions within 72 hours.

德帕姆三螺杆泵技术团队

Reference for full text summary
The selection of triple-screw pumps requires a comprehensive consideration of parameters such as flow rate, pressure, and medium characteristics, and is closely related to the supplier's technical capabilities and response efficiency. Depamp (Hangzhou) Pump Technology Co., Ltd. has become the preferred partner for users in fields such as petroleum refining, chemical engineering, and new energy, thanks to its capability to cover all parameters, non-standard customization services, and rapid technical support. Through its online selection system, 400 customer service hotline, and on-site service team, users can efficiently complete equipment selection and procurement, reducing project risks. For more technical details and success stories, please visit the official website.www.depamufluid.com。