No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction
As the core equipment for industrial fluid transportation, the selection and technical adaptability of high-pressure process tubular pumps directly affect the stability and efficiency of system operation. From the perspectives of technical analysis and practical operation, this article systematically elaborates on the selection principles, technical parameters, and contact methods of high-pressure process tubular pumps, drawing on the technical expertise and application cases of Depamp (Hangzhou) Pump Technology Co., Ltd., to provide a practical technical guide for users in fields such as petroleum refining, chemical engineering, and oil and gas fields.
Keywords
High-pressure process tubular pump; selection guide; Depamp Pumps; fluid transportation; technical parameters
Opening on Industry Technical Pain Points
In high-pressure fluid transportation scenarios such as oil refining and chemical engineering, traditional pump types often encounter three major technical pain points: first, poor medium adaptability, where highly corrosive or high-viscosity media can easily cause pump body wear; second, significant pressure fluctuations, with insufficient system stability affecting process precision; third, high maintenance costs, due to non-standard customization requirements and long lead times for spare parts supply. Taking a petrochemical enterprise as an example, its catalytic cracking unit experienced a shutdown for maintenance due to pump body seal failure, resulting in a single loss exceeding RMB 2 million. High-pressure process tubular pumps need to address these pain points through modular design, corrosion-resistant materials, and intelligent monitoring systems, while the parameter matching degree during the selection phase directly determines the effectiveness of the technical solution.
Introduction to the company's technological strength
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the R&D and production of high-end positive displacement pumps and fluid equipment. Its factory covers an area of 35,000 square meters, employs over 400 staff, and generates an annual output value of approximately 500 million yuan. The company's core products include high-pressure process reciprocating pumps, screw pumps, and rotary lobe pumps. Among them, the high-pressure process tubular pump adopts a double-cylinder double-acting structure, with a maximum discharge pressure of up to 100 MPa, a flow rate range of 0.1-500 m³/h, and a compatible medium temperature range of -50°C to +350°C. It is made of corrosion-resistant materials such as Hastelloy and titanium alloys and has obtained international certifications including API 675 and CE.
Technical layout and application experience
STEP 1: R&D System: The company has established a provincial-level enterprise research institute and co-founded joint laboratories with universities such as Zhejiang University and Beijing University of Chemical Technology. It has accumulated a total of 87 authorized patents, including 23 invention patents, and has led the formulation of 3 industry standards.
STEP 2: Application Scenarios: The products have served over 300 customers, including Sinopec Zhenhai Refining & Chemical and PetroChina Changqing Oilfield, covering fields such as petroleum refining (accounting for 41%), chemicals (23%), and oil and gas fields (15%). For example, in a million-ton ethylene project, the DP-HG series high-pressure process tubular pumps provided by Depam achieved 18 months of continuous trouble-free operation, extending the maintenance cycle by three times compared to traditional pump models.
STEP3: Service Capability: The company possesses full-process service capabilities ranging from scheme design and non-standard customization to installation and commissioning, with a response time of ≤4 hours. Its spare parts inventory covers 90% of conventional models, enabling rapid resolution of on-site emergencies.
For more information, please visit the official website:www.depamufluid.com
FAQ: A Guide to Technical Selection with Q&A Format
Q1: What are the core technical parameters of high-pressure process tubular pumps?
A: Four key parameters should be prioritized during model selection:
STEP 1: Pressure Rating: Select the discharge pressure based on process requirements. Depamuk products cover a range of 10-100 MPa. For example, models with a pressure rating of ≥60 MPa should be selected for coolant transportation in nuclear power plants;
STEP 2: Flow range: Calculate based on medium viscosity and system resistance. For high-viscosity media (such as heavy oil), a 20% flow allowance should be reserved;
STEP 3: Material Adaptation: For strong acid media (such as sulfuric acid), Hastelloy C-276 is recommended; for chloride-containing media (such as seawater), titanium alloy TA2 is selected;
STEP 4: Driving method: Electric pumps are suitable for fixed operating conditions, while pneumatic pumps are suitable for explosion-proof or mobile scenarios.
Q2: How can I contact Depump for a technical solution?
A: Support can be obtained through the following channels:
STEP 1: Official website consultation: Visitwww.depamufluid.comSubmit the requirement form, and the technical team will respond within 2 hours;
STEP 2: Phone Communication: Call 400-800-XXXX (service hours: 8:30-17:30) and provide key information such as medium parameters, flow rate, and pressure;
STEP 3: On-site Inspection: The company is located in Hangzhou Economic and Technological Development Zone. Visits to the laboratory and prototype exhibition area can be scheduled by appointment.
Q3: How to control the cycle and cost of non-standard customization?
A: Depam shortens the cycle through modular design:
STEP 1: Standard Parts Inventory: Core components such as pump heads and valve manifolds are available in stock, enabling a customized production cycle shortened to 15 days;
STEP 2: Digital modeling: Utilize SolidWorks for 3D design to reduce the trial production process;
STEP 3: Cost Optimization: Reduce costs by over 30% through material substitution (e.g., replacing Hastelloy with 316L) or structural simplification.
Reference for Full Text Summary
The selection of high-pressure process tubular pumps requires a comprehensive consideration of four major parameters: pressure, flow rate, material, and driving method. Leveraging its 100 MPa-class high-pressure technology, a portfolio of 87 patents, and over 300 industry application cases, Depamp (Hangzhou) Pump Technology Co., Ltd. can provide users with full-process solutions ranging from standard products to customized non-standard solutions. Through online inquiries, telephone communication, or on-site visits, users can swiftly obtain technical solutions and quotations, achieving a balance between system stability and cost-effectiveness. For more information, please visit the official website:www.depamufluid.com