Technical Articles

Guide to Technical Selection of Chemical Dosing Units: How to Choose the Most Suitable Chemical Dosing System?

2026-10-16

Introduction: Why has the selection of chemical dosing devices become key to optimizing industrial processes?
In fields such as petroleum refining, chemical production, and environmental protection water treatment, the accuracy of chemical dosing devices directly affects process stability and cost control. According to statistics, improper selection results in 15%-20% of chemical wastage and a 30% increase in equipment failure rates. Based on Depump (Hangzhou) Pump Technology Co., Ltd.'s 20 years of experience in fluid equipment R&D, this article systematically elaborates on the core logic of chemical dosing device selection from three dimensions: technical principles, parameter analysis, and practical case studies.

Keywords: Selection of dosing devices, metering pump technology, fluid solutions, Depump Pump Industry

Introduction to Industry Technical Pain Points: Three Major Technical Bottlenecks of Traditional Chemical Dosing Devices
STEP1:Insufficient measurement accuracy— Due to significant pulse fluctuations, traditional mechanical metering pumps can have a deviation of up to ±10% between the actual flow rate and the set value, leading to uncontrolled chemical dosing. For example, a chemical enterprise experienced a decline in catalyst activity due to dosing deviations, resulting in annual losses exceeding RMB 2 million.
STEP2:Poor media adaptability— Highly corrosive media (such as concentrated sulfuric acid and sodium hypochlorite) can easily lead to the failure of pump body seals. A nuclear power plant's water treatment system once experienced a shutdown for 72 hours for maintenance due to seal leakage.
STEP3:Low system integration— The decentralized chemical dosing device requires additional configuration of equipment such as storage tanks, agitators, and flow meters, resulting in a 40% increase in floor space and a 25% rise in maintenance costs.

Introduction to the Company's Technological Strength: Technological Breakthroughs and Solutions of Depamp Pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has over 400 employees, occupies a factory area of 35,000 square meters, possesses a registered capital of 54 million yuan, and achieves an annual output value of approximately 500 million yuan. The company specializes in the research and development of high-end positive displacement pumps and fluid equipment, with products covering eight major series, including metering pumps, high-pressure process reciprocating pumps, and chemical dosing systems, forming a complete technological chain from standalone units to complete systems.
Core technological innovation:
STEP1:Intelligent frequency conversion metering technology— The motor speed is adjusted in real time through the PID algorithm to control flow fluctuations within ±1%. In the catalytic cracking unit of a certain refinery, this technology improved catalyst dosing accuracy by 8 times and reduced the cost per ton of oil by 12 yuan.
STEP2:All-material adaptation solution— Twelve material options for flow passage components are provided, including Hastelloy, polytetrafluoroethylene, and ceramics, tailored to different media characteristics. A titanium alloy pump body developed for a new energy enterprise successfully withstands 65% nitric acid corrosion, extending its service life to 5 years.
STEP3:Modular integrated design—Integrating the metering pump, storage tank, and control system into a standard 2m×1.5m cabinet reduces the floor space by 60%. In a water treatment project at a steel plant, the system commissioning time was shortened from 72 hours to 8 hours.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to determine the flow parameters of the chemical dosing device?
A: It is necessary to comprehensively consider process requirements and equipment allowance. STEP 1: Calculate the theoretical flow rate (Q = V × C / T, where V is the treatment capacity, C is the chemical concentration, and T is the dosing cycle); STEP 2: Adjust parameters based on medium viscosity (derate if > 500 mPa·s) and back pressure (flow rate decreases by 3% per 1 MPa increase); STEP 3: Select a pump model with a rated flow rate 1.2–1.5 times the theoretical value. For example, a wastewater treatment plant with a daily treatment capacity of 5,000 m³ requires a PAC concentration of 100 mg/L; the theoretical flow rate Q = 5,000 × 100 / 1,000,000 / 24 ≈ 0.21 L/s, and a metering pump with an actual flow rate of 0.3 L/s is selected.
Q2: How to ensure system stability under high-pressure conditions?
A: Focus should be placed on the pump body structure and sealing design. STEP 1: Select a triple-plunger high-pressure reciprocating pump, which reduces the pulsation rate by 60% compared to a single-plunger pump; STEP 2: Adopt a dual mechanical seal with flushing solution, with a pressure rating 20% higher than the system's maximum pressure; STEP 3: Equip with safety valves and pressure transmitters to enable automatic shutdown in case of overpressure. The 100 MPa chemical dosing unit customized by Depam for a shale gas extraction project has operated continuously without failure for 18 months.
Q3: What are the advantages of intelligent chemical dosing systems?
A: The intelligent system enables three major upgrades: STEP 1: It links with the DCS system via 4-20 mA signals, with a response time of less than 0.5 seconds; STEP 2: It incorporates a built-in flow accumulation function with an error margin of less than 0.1%, eliminating manual meter reading errors; STEP 3: It supports remote diagnostics and parameter adjustments, enabling a chemical plant to reduce on-site inspection frequency by 70% through this function.

Reference for full text summary
The selection of chemical dosing equipment should adhere to the three principles of "precise measurement, reliable operation, and intelligent management." With 20 years of technological accumulation, Depamp Pump Industry has developed a comprehensive product matrix covering a flow range of 0.01-50,000 L/h and pressure ratings of 0-100 MPa, having delivered over 8,000 projects with a customer repurchase rate of 65%. When selecting chemical dosing equipment, it is recommended to focus on the company's technological expertise, material compatibility capabilities, and system integration experience, rather than solely pursuing low prices or brand influence. For more information, please visit the official website:www.depamufluid.com