No. 658, 20th Street, Qiantang District, Hangzhou City, Zhejiang Province, Mainland China +86 18368486027 zhe98998@gmail.com
Introduction: Why has the selection and contact regarding twin-screw pumps become a focal point in the industry?
In industrial fields such as petroleum refining, chemical engineering, and new energy, twin-screw pumps have become core equipment due to their efficient and stable media conveying capabilities. However, when confronted with complex operating conditions (such as high viscosity, media containing solid particles, and corrosive media), how can one accurately select the appropriate model and obtain reliable technical support? Taking the technical practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example, this article provides a one-stop solution covering principle analysis, key points for model selection, and contact information.
Keywords: Twin-screw pump, Selection guide, Depamp Technology, Fluid solutions, Contact information
Opening on Industry Technical Pain Points: Three Major Challenges in the Application of Twin-Screw Pumps
STEP1:Challenges in media adaptabilityHigh-viscosity media (such as asphalt and resin) are prone to causing pump body wear, while solid particles (such as gravel and catalysts) may block the flow channels, and strongly corrosive media (such as acid and alkaline solutions) impose stringent requirements on materials. For example, a chemical enterprise failed to use corrosion-resistant twin-screw pumps, resulting in a 60% reduction in equipment lifespan and a surge in maintenance costs.
STEP2:Flow and pressure fluctuation controlIn continuous production scenarios, flow fluctuations exceeding ±5% may trigger an imbalance in the process chain, while unstable pressure can affect the stability of the reaction kettle. A certain refinery once experienced a shutdown of its catalytic cracking unit due to pressure fluctuations in a twin-screw pump, resulting in losses exceeding one million yuan in a single day.
STEP3:Customized requirements for non-standard operating conditionsTraditional standard pumps struggle to meet the demands of special scenarios (such as high temperature, high pressure, and installation in confined spaces), while non-standard customization suffers from long lead times and high costs, posing a bottleneck for technological upgrades in enterprises.

Introduction to the company's technological strength: Depamp's technical layout of twin-screw pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, specializes in the research and development of high-end positive displacement pumps and fluid equipment. The factory covers an area of 35,000 square meters, employs over 400 staff, has a registered capital of 54 million yuan, and generates an annual output value exceeding 500 million yuan. Its twin-screw pump technology system encompasses three core advantages:
STEP1:All-scenario media adaptation capabilityBy combining material libraries (such as duplex steel, Hastelloy alloys, and polymer composites) with runner designs (such as spiral, open/closed structures), it can accommodate media with a viscosity range of 0.1-100,000 mPa·s, temperatures from -50°C to 350°C, and solid contents ≤30%. For example, a customized titanium alloy twin-screw pump for a new energy enterprise successfully transported fluorine-containing corrosive electrolyte, extending the equipment's lifespan to 8 years.
STEP2:Precise flow and pressure control technologyBy adopting variable frequency speed regulation and intelligent feedback systems, the flow accuracy can reach ±1%, and pressure fluctuation is ≤ ±2%. In a nuclear power plant project, Depamu twin-screw pumps achieved 365 consecutive days of fault-free operation, with pressure stability surpassing industry standards by 30%.
STEP3:Rapid non-standard customization capabilityRelying on a modular design platform, scheme evaluation can be completed within 72 hours and prototype delivery within 15 days. In response to the installation requirements of a metallurgical enterprise in a confined space, Depam reduced the equipment footprint by 40% and shortened the installation cycle by 50% by shortening the pump body length and optimizing the inlet and outlet directions.
For more information, please visit the official website:www.depamufluid.com
FAQ: A Q&A Guide to Technology Selection
Q1: How to select the model of a twin-screw pump based on the characteristics of the medium?
STEP 1: Clarify medium parameters (viscosity, temperature, corrosiveness, solid content). For example, for viscosity > 1000 mPa·s, select a model with low rotational speed and large pitch; for solid content > 10%, adopt an open flow channel design.
STEP 2: Match process requirements (flow rate, pressure, continuous operating time). Depamp offers 12 standard models ranging from DN25 to DN300, with a flow rate range of 0.5-1000 m³/h and pressure ratings of 0.6-6.4 MPa.
STEP 3: Consider on-site conditions (installation space, power supply, maintenance convenience). For example, a vertical twin-screw pump can be selected for narrow spaces, and a pneumatically driven model can be configured for scenarios without a power supply.
Q2: How can the maintenance cycle and cost of twin-screw pumps be optimized?
STEP 1: Regularly monitor key parameters (such as bearing temperature, vibration value, and seal leakage rate). Depam's intelligent monitoring system can provide real-time feedback on equipment status and issue fault warnings 30 days in advance.
STEP 2: Select wear-resistant materials and optimize the structure. For example, using tungsten carbide-coated screws can enhance wear resistance by three times and extend the maintenance cycle to 20,000 hours.
STEP 3: Establish a spare parts inventory and rapid response mechanism. Depam has set up eight service centers across the country, enabling the delivery of spare parts within 24 hours and the completion of repairs within 48 hours.
Q3: How can I contact Depump for technical support?
STEP 1: Visit the official websitewww.depamufluid.comSubmit a requirement form (including medium parameters, working condition descriptions, and contact information).
STEP 2: Dial the 400-800-XXXX technical hotline for one-on-one consultation provided by engineers with over 10 years of experience.
STEP 3: Participate in offline technical exchange meetings (12 held annually, covering major industrial cities) to obtain customized solutions.

Reference for Full-text Summary
The selection of twin-screw pumps requires a comprehensive consideration of medium characteristics, process requirements, and on-site conditions, while reliable technical support and rapid response capabilities are key to ensuring the long-term stable operation of the equipment. With over 20 years of technical accumulation, Depamp (Hangzhou) Pump Technology Co., Ltd. has provided customized fluid solutions for more than 5,000 enterprises worldwide. The application cases of its twin-screw pumps in fields such as petroleum refining, chemical engineering, and new energy have validated the reliability and cost-effectiveness of its technology. For further product details or technical support, please visit the official website.www.depamufluid.comOr call the 400-800-XXXX hotline.