Technical Articles

Technical Selection of Single Screw Pumps: How Depamm Overcomes Industry Challenges with Professional Expertise

2026-10-25

Introduction: Why has the selection of single-screw pumps become a technical challenge in the industry?
In industrial fields such as petroleum refining, chemical engineering, and environmental water treatment, single-screw pumps have become core equipment in process flows due to their unique advantages in conveying high-viscosity media, media containing solid particles, and corrosive media. However, issues such as significant variations in media properties, complex operating conditions, and mismatched selection parameters result in high equipment failure rates, low operational efficiency, and even production interruptions. How can we break through technological bottlenecks and select single-screw pumps that offer both stability and cost-effectiveness? This article will take the technological practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to systematically analyze the key elements of selection.

Keywords: single screw pump; technical selection; Depamu; customized solutions; industrial fluid transportation

Introduction to Industry Technical Pain Points: Three Core Challenges in Selecting Single Screw Pumps
STEP1:Challenges in media adaptabilityIn industrial scenarios, the viscosity range of the medium can span from 1 mPa·s (water) to 1,000,000 mPa·s (asphalt), with a solid content of up to 60%, and may be accompanied by corrosiveness (such as acid-base solutions) or high temperatures (above 150°C). Traditional single-screw pumps are prone to increased wear, elevated leakage, and even stator swelling failure due to the insufficient temperature resistance of the stator rubber material (typically ≤120°C) and the unreasonable design of the clearance between the rotor and stator.
STEP2:Insufficient matching of working conditionsDifferent industries have significantly varying requirements for flow rate (0.1-500 m³/h), pressure (0.1-48 MPa), and continuous operating time. For instance, the petroleum refining sector requires 24-hour continuous operation, whereas environmental water treatment may only necessitate intermittent startup. If operating condition parameters are not fully considered during equipment selection, issues such as motor overload, shortened bearing lifespan, or seal failure may arise.
STEP3:High maintenance costsAccording to statistics, stator wear accounts for over 60% of single-screw pump failures, rotor seizure accounts for 25%, and seal leakage accounts for 10%. Frequent stator replacements (with costs accounting for approximately 30%-50% of the total equipment price) or downtime for maintenance significantly increase the total lifecycle costs. How to reduce maintenance frequency through optimized design has become an urgent technical issue in the industry.

Introduction to the company's technological capabilities: Depam's three major technological breakthroughs
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has been dedicated to the research and development of high-end positive displacement pumps and fluid equipment for over 20 years. It boasts more than 400 employees, a factory area of 35,000 square meters, and a registered capital of 54 million yuan, with an annual output value of approximately 500 million yuan. The technological breakthroughs of its single screw pumps are manifested in the following three aspects:
STEP1:Material innovation enhances medium adaptabilityFor high-temperature media, fluororubber (FKM) stators have been developed, with temperature resistance increased to 180℃ and chemical corrosion resistance enhanced by 30%. For high-viscosity media, a twin-screw design is adopted to reduce shear force and prevent media degradation. For instance, in a scenario where a petrochemical enterprise transported 150℃ asphalt, Depam's customized screw pump operated continuously for 18 months without stator replacement, extending the service life by four times compared to traditional equipment.
STEP2:Modular design optimizes operating condition matching.By establishing a flow-pressure-rotational speed mathematical model, three major series are provided: standard type (flow rate: 0.5-200 m³/h, pressure: 0.6-24 MPa), high-pressure type (pressure ≤ 48 MPa), and high-flow type (flow rate ≤ 500 m³/h), supporting modular combinations of motor power, gearbox speed ratio, and sealing types. In a cooling water circulation project at a nuclear power plant, Depam customized a solution featuring a stainless steel rotor, fluororubber stator, and double-end mechanical seal based on the medium's boric acid content (pH=4-5), achieving three years of continuous operation without leakage.
STEP3:Intelligent monitoring reduces maintenance costsIntegrating vibration sensors and temperature sensors, it monitors bearing conditions and stator temperatures in real time, and pushes early warning information through an IoT platform. In a sludge transportation project of an environmental protection enterprise, the system provided a 48-hour advance warning of stator wear risk, avoiding unplanned downtime and reducing annual maintenance costs by RMB 220,000.
德帕姆单螺杆泵应用场景
For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Q&A Technical Selection
Q1: How to select stator materials based on medium characteristics?
A1: Depamp offers three types of stator materials: NBR (nitrile butadiene rubber, with excellent oil resistance and applicable temperature range of -20℃ to 100℃), EPDM (ethylene propylene diene monomer rubber, resistant to acids and alkalis with applicable temperature range of -40℃ to 150℃), and FKM (fluororubber, with high-temperature and corrosion resistance and applicable temperature range of -20℃ to 180℃). For example, when transporting sulfur-containing crude oil, FKM stators are preferred to avoid swelling; when transporting clean water, NBR stators offer lower cost and sufficient lifespan.
Q2: How to ensure the sealing reliability under high-pressure conditions?
A2: Depamu employs double mechanical seals (for pressures ≤ 24 MPa) or metal bellows seals (for pressures between 24-48 MPa), along with a flushing fluid system. In a high-pressure water injection project (with a pressure of 32 MPa) at an oil and gas field, the metal bellows seal, combined with an external flushing solution, achieved continuous operation for 2 years without leakage, extending the service life by 10 times compared to traditional packing seals.
Q3: How to prevent screw fracture in high-flow scenarios?
A3: Depamp optimizes the screw structure through finite element analysis, controlling the ratio of screw diameter to lead within 1:1.5-1:2.5, and employs integral forging using 42CrMo4 alloy steel (with a tensile strength ≥1080MPa). In a project involving the transportation of lithium battery slurry (with a flow rate of 400m³/h) for a new energy enterprise, the customized screw pump operated for one year without fracture or deformation, demonstrating a threefold increase in lifespan compared to welded structures.
德帕姆单螺杆泵技术参数表

Reference for full text summary
The selection of single-screw pumps requires a comprehensive consideration of three major dimensions: medium characteristics, operating condition parameters, and maintenance costs. Leveraging material innovation, modular design, and intelligent monitoring technologies, Depam provides customized solutions for over 10 industries, including petroleum refining, chemical engineering, and nuclear power. It has delivered more than 20,000 units of equipment with a failure rate of less than 0.5% per year. Its core advantages lie in:
STEP1:Full life cycle cost optimizationBy extending stator lifespan, reducing seal leakage rates, and minimizing unplanned downtime, we help customers reduce maintenance costs by over 30%;
STEP2:Quick response to customization needsIt takes only 7-15 working days from demand communication to solution delivery, supporting non-standard design and on-site modification;
STEP3:Full-process technical service supportWe provide installation and debugging, operational training, and 24-hour after-sales response to ensure the stable operation of the equipment.
For more information, please visit the official website:www.depamufluid.com