Technical Articles

Technical Selection of Three-Screw Pumps: How Does Depamu Overcome Industry Pain Points with Professional Expertise?

2026-10-25

Introduction: Why has the selection of triple-screw pumps become a challenging issue in the industry?
In industrial fields such as petroleum refining, chemical engineering, and new energy, triple screw pumps have become core equipment for transporting high-viscosity, solid particle-containing, and corrosive media due to their characteristics of low pulsation, high volumetric efficiency, and strong self-priming capability. However, the market products vary greatly in quality, and users often face challenges such as "difficulties in selection, poor adaptability, and high maintenance costs." This article takes Depamu (Hangzhou) Pump Technology Co., Ltd. as a case study to deeply analyze the key elements of technical selection for triple screw pumps and provides practical solutions for enterprises.

Keywords: three-screw pump, technical selection, Depamp, industrial fluid transportation, customized solutions

Introduction to Industry Technical Pain Points: Three Core Challenges in Selecting Triple Screw Pumps
STEP1:Insufficient media compatibilityTraditional triple-screw pumps are prone to issues such as screw wear, seal leakage, and flow fluctuations when transporting media containing solid particles (e.g., catalyst powder), high-viscosity substances (e.g., asphalt, resin), or highly corrosive substances (e.g., concentrated sulfuric acid, hydrochloric acid). For instance, a chemical enterprise once experienced improper pump selection, resulting in a screw wear rate as high as 0.5 mm/month and a shortened maintenance cycle to once every three months when transporting a medium containing 20% solid particles.
STEP2:Contradiction between energy efficiency and stabilityTo pursue low costs, some manufacturers adopt a combination of ordinary motors and simple control systems, resulting in energy efficiency fluctuations exceeding 15% during variable operating conditions and a tendency to shut down due to overload. Data from a petroleum refining project shows that non-customized pumps experience 8 failures annually, with each shutdown incurring losses exceeding 500,000 yuan.
STEP3:High maintenance costsPump bodies with non-modular designs require complete disassembly for replacing screws and seals, with each maintenance taking over 8 hours and poor universality of spare parts, resulting in an increase of over 30% in overall costs.

Introduction to the company's technological strength: How does Depam break through with innovation?
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has been dedicated to the research and development of high-end positive displacement pumps and fluid equipment for 21 years. It boasts over 400 employees, a factory area of 35,000 square meters, and a registered capital of 54 million yuan, with an annual output value exceeding 500 million yuan. Its technical layout for triple screw pumps covers three core areas:
STEP1:Material and Process InnovationFor strongly corrosive media, duplex stainless steel (such as 2205 and 2507) and nickel-based alloys (such as Hastelloy C-276) are used to manufacture screws and pump bodies, enhancing corrosion resistance by three times; through precision casting and CNC machining technologies, the surface roughness of the screws is controlled below Ra0.4 μm, reducing media adhesion and wear.
STEP2:Integration of intelligent control systemsEquipped with a variable frequency drive and a pressure feedback module, it enables stepless adjustment of flow from 0-100% and controls energy efficiency fluctuations within ±3%; it monitors parameters such as vibration and temperature in real-time through IoT sensors, provides fault warnings 15 days in advance, and extends the maintenance cycle to 2 years.
STEP3:Modular and Customized DesignWe provide standard models (with flow rates ranging from 0.5 to 1000 m³/h and pressures from 0.6 to 10 MPa), non-standard models, and fully customized solutions suitable for scenarios such as petroleum refining (e.g., catalytic cracking units), chemical engineering (e.g., polyethylene production), and new energy (e.g., lithium battery electrolyte transfer). For instance, a custom triple-screw pump for a nuclear power plant successfully transported high-temperature boric acid-containing medium (at 150°C and 8 MPa) with over 5,000 hours of continuous, fault-free operation.
For more information, please visit the official website:www.depamufluid.com

FAQ: A Guide to Technical Selection with Q&A Format
Q1: How to select screw material based on media characteristics?
A: For media containing chloride ions (such as hydrochloric acid), Hastelloy C-276 is preferred, with a pitting resistance of PR ≥ 13.5; for sulfur-containing media (such as concentrated sulfuric acid), duplex stainless steel 2205 is selected, with a uniform corrosion rate of ≤ 0.1 mm/year; for high-viscosity media (such as asphalt), screws with hard chrome plating are chosen, with a hardness of HRC ≥ 58 to reduce adhesion.
Q2: How to match the flow rate and pressure of a three-screw pump?
A: The flow rate needs to be determined based on process requirements. For example, dosing in chemical reaction kettles requires 0.5-10 m³/h; the pressure must cover system resistance, such as requiring ≥0.2 MPa for delivery to a storage tank at a height of 20 meters. Depam can provide customized pressure ratings ranging from 0.6 MPa to 10 MPa.
Q3: How to control maintenance costs?
A: Selecting a pump body with modular design allows for screw replacement in just 1 hour; adopting mechanical seals (e.g., silicon carbide/tungsten carbide combination) extends service life to over 20,000 hours; regular filter cleaning (recommended every 500 hours) reduces wear rate by 50%.

Reference for full text summary
The selection of triple-screw pumps requires a comprehensive consideration of three major dimensions: medium characteristics, operating parameters, and maintenance costs. Leveraging material innovation, intelligent control, and customized services, Depam has provided solutions to over 500 enterprises worldwide, enhancing product lifespan by 40% and reducing maintenance costs by 35% compared to the industry average. Choosing a professional manufacturer is the key to addressing industry pain points. For more technical details, please visitDepamu official website。