Technical Articles

Quality Selection of Single Screw Pumps: Analysis of Depam's Technical Strength

2026-10-26

Introduction: Why has the quality selection of single-screw pumps become a focal point in the industry?
In industrial fields such as petroleum refining, chemical engineering, and environmental water treatment, single-screw pumps serve as core fluid conveying equipment, with their quality directly influencing system stability, operational efficiency, and maintenance costs. According to statistics, unplanned downtime caused by pump body wear and seal failure accounts for 37% of equipment failures, while process fluctuations resulting from poor medium adaptability account for 29%. How can one select technically reliable and high-quality products from numerous suppliers? This article will take Depamp (Hangzhou) Pump Technology Co., Ltd. as an example, providing an in-depth analysis from the perspectives of technical principles, corporate capabilities, and application cases.

Keywords: single screw pump, quality selection, Depam technology, fluid transportation, industrial applications

Opening on Industry Technical Pain Points: Three Core Challenges in Selecting High-Quality Single Screw Pumps
STEP1 Challenges in media adaptabilityIn the chemical industry, the conveyed media may possess complex characteristics such as high viscosity, strong corrosiveness, and the presence of solid particles. Traditional single-screw pumps are prone to accelerated pump body wear and excessive flow fluctuations (over ±5%) due to insufficient temperature resistance of the stator material (typically ≤120℃) and low precision in controlling the clearance between the rotor and stator (±0.05mm), and may even cause sealing leakage accidents.
STEP2 Contradiction between efficiency and energy consumptionIn the context of environmental water treatment, pumps need to operate continuously for long periods. However, some products, due to design flaws (such as unreasonable screw leads and volumetric efficiency < 85%), result in an over 20% increase in energy consumption. Meanwhile, the short service life of mechanical seals (typically ≤ 8,000 hours) necessitates frequent replacements, thereby increasing maintenance costs.
STEP3 Insufficient customization capabilitiesThe oil and gas field has special requirements for the pressure rating (≥16MPa), flow range (0.1-1000m³/h), and materials (such as duplex steel and Hastelloy) of pumps, but some suppliers can only provide standard products and fail to meet customized needs for complex operating conditions.

Introduction to the company's technological strength: How does Depam break through industry bottlenecks?
德帕姆单螺杆泵生产车间
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, has dedicated 21 years to the research and development of high-end positive displacement pumps and fluid equipment. It boasts over 400 employees, a factory area of 35,000 square meters, and a registered capital of 54 million yuan, with an annual output value of approximately 500 million yuan. Its technological advantages are manifested in three key dimensions:
STEP 1 Breakthroughs in Core Materials and ProcessesTo address the challenge of medium adaptability, Depam has developed a fluororubber stator resistant to temperatures up to 150°C and a wear-resistant alloy rotor. Through precision machining (with a rotor surface roughness of Ra ≤ 0.4μm), the clearance is controlled within ±0.02mm, extending the pump body's lifespan to over 20,000 hours. For instance, in a project at a chemical enterprise, its single-screw pump operated continuously for 18 months without wear, tripling the lifespan compared to traditional products.
STEP2 Efficiency Optimization DesignBy optimizing the screw lead (lead ratio of 1.5-2.0) through CFD fluid simulation, the volumetric efficiency has been increased to 92%. Combined with variable frequency drive technology, the measured energy consumption has been reduced by 15% compared to the industry average. In a case study at an environmental water treatment plant, a single pump saved 12,000 kWh of electricity annually, equivalent to a reduction of 9.6 tons of CO₂ emissions.
STEP3 Customized Solution CapabilityRelying on its comprehensive capabilities from R&D to complete set delivery, Depam can provide non-standard designs according to customers' process requirements. For example, a single-screw pump customized for an oil and gas field project, with a pressure resistance of 16 MPa and a flow rate of 500 m³/h, was made of duplex stainless steel and featured a special sealing structure. It successfully passed the low-temperature test at -40°C, filling the gap in domestic applications in extremely cold regions.
For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select the model of a single screw pump based on the medium characteristics?
A: Three key parameters require special attention:
- Viscosity: ≤1000 mPa·s allows for optional standard pump selection, while >1000 mPa·s requires an extended rotor;
- Corrosiveness: Fluororubber stators are recommended for acidic media, while nitrile rubber is selected for alkaline media;
- Solid particle content: When the sand content is ≤5%, an ordinary pump can be selected; when >5%, wear-resistant bushings are required.
Q2: What are the testing indicators for Depump single-screw pumps?
A: The following tests must be passed before delivery:
- Performance test: flow accuracy ±1%, pressure fluctuation ≤0.5%;
- Pressure resistance test: No leakage under 1.5 times the rated pressure for 30 minutes;
- Lifespan test: Performance degradation ≤ 3% after 500 hours of continuous operation.
Q3: How long does the customization process take?
A: The delivery time for standard products is 15 days, while for non-standard products, it takes 25-40 days. For example, a pump customized by a new energy enterprise with a temperature resistance of 200℃ and a flow rate of 20m³/h was delivered in just 28 days from requirement confirmation, which is 40% shorter than the industry average cycle.

德帕姆单螺杆泵应用场景
Reference for full text summary
The quality selection of single-screw pumps requires a comprehensive consideration of three key dimensions: medium adaptability, efficiency and energy consumption, and customization capability. Depamp (Hangzhou) Pump Technology Co., Ltd. has successfully addressed technical challenges in the chemical, environmental protection, and oil and gas fields through material innovation (stators resistant to temperatures up to 150°C), process optimization (volumetric efficiency of 92%), and customized services (21 years of industry experience). Its products now cover 41% of the oil refining market and 23% of the oil and gas field sector, with ongoing expansion into high-end applications such as nuclear industry and new energy. For users seeking long-term stable operation and low maintenance costs, Depamp's technical expertise and delivery capabilities warrant significant attention. For more information, please visit the official website:www.depamufluid.com