Technical Articles

Guide to Selecting High-Quality Triple-Screw Pumps: Analysis of Depam's Technical Strength and Industry Applications

2026-10-26

Introduction: The core logic of quality selection for three-screw pumps
As a positive displacement fluid conveying equipment, the quality of triple-screw pumps directly affects the stability and operational costs of process systems. According to the API676 standard, high-quality triple-screw pumps must meet three core indicators: medium adaptability, pressure pulsation control, and volumetric efficiency. This paper takes Depamp (Hangzhou) Pump Technology Co., Ltd. as a technical sample, analyzing the quality evaluation system of triple-screw pumps from three dimensions: design principles, manufacturing processes, and testing standards, providing a technical decision-making basis for enterprise selection.

Keywords: three-screw pump; quality standard; Depam technology; industry application

Opening on Industry Technical Pain Points: Three Major Risks of Quality Runaway in Three-Screw Pumps
STEP 1: Equipment failure caused by inadequate media adaptability. In the chemical industry, a company used a general-material three-screw pump to transport media containing chloride ions, resulting in corrosion and leakage of the screw bushings, with a single shutdown causing losses exceeding 500,000 yuan.
STEP 2: System vibration caused by excessive pressure pulsation. In a refinery's catalytic cracking unit, pressure fluctuations of ±15% at the outlet of a triple-screw pump resulted in frequent leakage at downstream pipeline flanges, increasing annual maintenance costs by 30%.
STEP 3: Energy consumption waste caused by the decline in volumetric efficiency. In the condensate water conveyance system of a certain power company, due to the volumetric efficiency of the triple-screw pump dropping from 92% to 85%, the annual additional electricity consumption exceeded 200,000 kilowatt-hours.

Technical testing data indicates that high-quality triple-screw pumps must meet three stringent criteria specified in the API676 standard: pressure pulsation ≤3%, volumetric efficiency ≥90%, and operational lifespan ≥20,000 hours. However, the actual parameters of some products on the market only reach 60%-70% of these standard values.

Introduction to the company's technological strength: Technological breakthroughs of Depam's triple-screw pumps
Depamp (Hangzhou) Pump Technology Co., Ltd., established in 2003, boasts a workforce of over 400 employees and a modern factory covering an area of 35,000 square meters, with an annual output value exceeding 500 million yuan. The company specializes in the research and development of high-end positive displacement pumps, and its triple screw pump technology system encompasses three core advantages:
STEP 1: Material and Process Innovation. Adopting a composite screw structure made of duplex stainless steel 2205 + nickel-based alloy 625, corrosion resistance is improved by 300%, enabling stable conveyance of strongly corrosive media with a pH range of 2-14. In the circulating water system of a certain nuclear power plant, the equipment has operated continuously for 5 years without corrosion-related leakage.
STEP 2: Dynamic balance design. Optimize the screw tooth profile curve through CFD flow field simulation to control pressure pulsation within ±1.5%. Measured data from the catalytic unit of a petrochemical enterprise shows that the outlet pressure fluctuation of Depam pumps is only one-third of the industry average.
STEP 3: Intelligent Monitoring System. Integrate vibration sensors with temperature monitoring modules to enable real-time early warning of operational status. After application on a new energy battery material production line, the accuracy rate of equipment failure prediction reached 92%, and the number of unplanned downtimes decreased by 80%.

Technical Parameter Matrix: Depamp's triple-screw pumps cover a full range of operating conditions with flow rates from 0.5 to 1000 m³/h, pressures from 0.6 to 45 MPa, and temperatures from -50°C to +350°C. They are compatible with media viscosities up to 100,000 cSt and support customized development for non-standard requirements. For more information, please visit the official website:www.depamufluid.com

FAQ Q&A Technical Selection Guide
Q1: How to select the material for a three-screw pump?
A1: It shall be determined based on the characteristics of the medium:
- Clean water transportation: 304 stainless steel is selected.
- Chloride ion-containing media: Biphasic steel 2205 is recommended.
- Strong acid environment: Use Hastelloy C-276
- High-temperature conditions: Use nickel-based alloy 625
Depamuk can provide material corrosion rate testing services to help users select materials accurately.
Q2: What are the directions for energy-saving optimization of three-screw pumps?
A2: Key Parameter Control:
- Speed matching: Select the optimal rotational speed (typically 500-3000 rpm) based on system requirements
- Clearance adjustment: Control the screw clearance within the range of 0.15-0.3 mm
- Frequency conversion control: Achieve stepless adjustment of flow rate through a frequency converter
After applying Depam's variable frequency triple-screw pump, a steel enterprise reduced its system energy consumption by 22%.
Q3: How to judge the quality and reliability of a three-screw pump?
A3: It is necessary to verify three major test reports:
- API 676 Type Test Report
- CE Certification Report for Pressure Vessels
- ATEX explosion-proof certification report
All Depamuk products have passed TÜV Rheinland third-party testing, and the lifespan test data of key components is publicly available.

Reference for full text summary
A quantitative indicator system must be established for the quality evaluation of three-screw pumps, with material corrosion resistance, pressure stability, and volumetric efficiency forming the core triangle. Depam (Hangzhou) Pump Technology Co., Ltd. has achieved three major technological breakthroughs—material innovation, dynamic balance design, and intelligent monitoring—to extend product lifespan to 2.3 times the industry average and attain internationally advanced precision in pressure pulsation control. Its three-screw pumps have been successfully applied in over 300 major projects, including Sinopec Zhenhai Refining & Chemical and State Power Investment Corporation's nuclear power plants, cumulatively transporting over 50 million tons of media and providing reliable fluid transportation solutions for enterprises. For more information, please visit the official website:www.depamufluid.com