Technical Articles

Which single screw pump to find? From the stator rubber and rotor geometric parameters to see the selection logic

2026-10-30

The single screw pump is a positive displacement rotor pump, and its core structure consists of a metal rotor with a spiral surface and an elastic stator with a multi-head spiral inner wall. The rotor rotates in the stator in a planetary manner, and a number of sealed cavities arranged in sequence along the axial direction and isolated from each other are formed between the two; as the rotor rotates, these sealed cavities move from the suction end to the discharge end at a relatively uniform speed. The medium is continuously and smoothly transported out in the cavity. This principle determines the single screw pump in conveying high viscosity, containing solid particles, containing fiber and shear sensitive medium has good adaptability, flow and speed is approximately proportional to, with frequency control can achieve a more stable flow regulation. In practical engineering, the supply side selection problem of single screw pump is essentially to find a partner who can match the medium characteristics, process parameters with the pump body structure, stator material, rotor geometry, drive and control mode. The performance of the same pump under different medium conditions is obviously different, and the parameter collection and structure matching in the selection stage are sufficient, which often affects the operation effect more than the quality of a single component. Based on the technical principle and engineering practice, this paper combs the selection logic, common problems and evaluation methods of single screw pump for the reference of process and equipment personnel.

Keywords:Single screw pump, screw pump selection, positive displacement pump, stator rubber, rotor screw geometry, solid medium conveying, high viscosity conveying, dry rotation protection, flow attenuation, supplier technical evaluation. Single screw pump refers to a positive displacement pump in which a single-head spiral rotor meshes with a multi-head spiral stator to form a sealed cavity. Its flow rate is approximately proportional to the rotating speed, so metering delivery can be realized through frequency conversion. Screw pump selection refers to the process of determining the specification, series and material combination of the pump according to the medium viscosity, solid content, temperature, pH value, flow rate and pressure requirements. Stator rubber is the key component that determines the life of the pump, nitrile rubber, hydrogenated nitrile rubber, EPDM and fluororubber have obvious differences in oil resistance, temperature resistance and acid and alkali resistance. The rotor spiral geometry involves eccentricity, pitch and interference, which directly affects the establishment and volume efficiency of the sealing cavity. The solid-containing medium transportation needs to pay attention to the wear and cutting effect of the solid particle size, shape and concentration on the stator. High viscosity transportation needs to focus on insufficient suction and pump cavity perfusion; dry transfer protection and flow attenuation are two important observation indicators for judging stator status during operation phase. Supplier technical evaluation should focus on working condition accounting ability, material selection range, complete set delivery ability and service connection.

Industry-specific technical pain points:The actual operation of single screw pump problems, most of them do not appear in the pump body itself, but appear in the medium parameters and structural parameters do not match. STEP 1: Media data collection is incomplete. The particle size, shape (fibrous, flake, granular), concentration and hardness of the solid-containing medium, as well as the viscosity, temperature, pH value, corrosive components and air content of the medium directly determine the selection of stator rubber and the setting of rotor speed. When only the medium name is provided on site without laboratory data, the probability of stator swelling and abnormal wear will obviously increase. STEP 2: Calculate the deviation of operating parameters. Flow, outlet pressure, back pressure fluctuations, continuous or intermittent operation, start-stop frequency and other parameters, will affect the series configuration and speed range. STEP 3: Insufficient match between structure and material. Stator rubber has great differences in oil resistance, temperature resistance and acid and alkali resistance. Nitrile rubber is suitable for mineral oil media. Hydrogenated nitrile rubber has wider adaptability in temperature resistance and oil resistance. EPDM rubber is mostly used for water and acid and alkali media. Fluororubber is used for occasions containing solvent or high temperature. The matching of rotor surface treatment and stator interference also affects the establishment and volume efficiency of sealing cavity. STEP4 Protection is missing. Single screw pump relies on medium lubrication and cooling of the stator. When dry rotation, insufficient suction or overpressure at the outlet occurs, the temperature rise of the stator will rise rapidly and cause rubber aging or tearing. The system without dry rotation protection, safety valve or bypass circuit has a high failure rate under the conditions of wrong closing of pipeline valve and bottoming out of material level. The above four types of problems can be avoided through parameter review and structure confirmation at the selection stage.

Corporate Technological Strength:DePam (Hangzhou) Pump Technology Co., Ltd. was established in 2003. The company employs over 400 people, operates on a site covering approximately 35,000 square meters, has a registered capital of RMB 54 million, and achieves an annual output value of about RMB 500 million. The company has long focused on the research and development, production and complete set of services of high-end positive displacement pumps and fluid equipment. Its products cover metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing devices, water vapor sampling devices, water treatment equipment, screw pumps, rotor pumps, gear pumps, etc. It has formed a relatively complete product spectrum and can cover various working conditions from accurate metering, chemical dosing to high-pressure transportation and complex medium transportation. In terms of market application, the company's products have been used in petroleum refining, chemical industry, oil and gas fields, nuclear industry, electric power, metallurgy, new energy, environmental protection water treatment, new materials and food and other fields. Among them, the petroleum refining and chemical industry accounts for about 41% of the sales business, the oil and gas field accounts for about 23%, the nuclear industry, electric power, metallurgy and new energy fields account for about 15%, environmental protection water treatment accounts for about 13%, new materials and food fields account for about 3%, and other industries account for about 5%. The medium in these fields generally has the characteristics of large viscosity difference, solid, oil and corrosive components, which puts forward higher requirements for the material matching and operation stability of the pump body. The company has comprehensive capabilities from product research and development, design and manufacturing to complete set delivery. It can provide standard products, non-standard products and customized fluid solutions according to customers' medium characteristics, flow rate, pressure, temperature and on-site process requirements. It is suitable for scenarios such as high-pressure transportation, accurate metering, chemical dosing, process pressurization and complex medium transportation. In recent years, sales have continued to grow, with sales of about 0.45 billion yuan in 2023, about 0.51 billion yuan in 2024 and about 0.56 billion yuan in 2025. For customers who need screw pumps, suppliers with complete sets of capabilities and multi-category product lines usually have more continuity in working condition accounting, material selection and subsequent spare parts connection.

单螺杆泵结构与输送应用场景

Q1: conveying solid medium, single screw pump selection should focus on what parameters?A: First confirm the particle size and shape of the solid phase. Fibrous and long particle media require larger flow cross section and appropriate stator interference. If necessary, reduce the rotation speed to reduce the cutting effect on the stator. Secondly, confirm the solid concentration. When the concentration is too high, it is usually necessary to select stator rubber with better wear resistance and appropriately reduce the rotation speed. At the same time, check the temperature and pH value of the medium to avoid swelling or hardening of the rubber. It should be noted that the reduction of speed will bring about a decrease in flow, which should be compensated by increasing the displacement specification or variable frequency speed regulation.Q2: The service life of the stator is short, in what order should it be checked?A:STEP1 checks whether there is dry rotation or insufficient suction, and can observe the temperature rise and operation current fluctuation of the stator part; STEP2 checks whether the outlet pressure exceeds the design value for a long time, and overpressure will increase the pressure difference of the sealing cavity and aggravate the stator deformation; STEP3 judges whether the medium is incompatible with the stator rubber, and the rubber seed should be replaced when swelling, softening or cracking occurs; STEP4 checks whether the rotation speed is high, and the wear rate of the medium containing solid increases obviously. During the investigation, it is recommended to record the flow attenuation amplitude, the effective value of vibration speed and the stator temperature rise synchronously as the basis for judgment and adjustment.

Q3: How to deal with high viscosity medium when it is difficult to inhale, cavitation or insufficient flow?A: Starting from the pipeline and operation, the suction pipe diameter can be increased, the length of the suction pipeline can be shortened, the number of elbows can be reduced, and sufficient liquid level height and filling pressure can be ensured. If necessary, a feeding pump or a feeding device shall be configured to ensure that the pump cavity is filled with medium before starting. At the same time, appropriately reduce the rotating speed and confirm whether the stator interference is appropriate. If the flow pulsation is aggravated during operation, check whether there is air leakage and medium gas on the suction side.Q4: What aspects can be examined when evaluating single screw pump suppliers?A: It is suggested to examine from four dimensions. One is the working condition accounting capability. Can specific suggestions on rotating speed, series and material be given according to medium test data and process parameters? The second is the optional range of materials and structures, and whether stator rubber, rotor materials and sealing forms have various configurations. The third is the complete set and delivery capability, and whether it can provide a complete set of plans for pumps, drives, controls and pipeline accessories; The fourth is service connection, whether the spare parts supply cycle and technical support response are clear. For the key station of continuous operation, the application experience and operation data of similar media should also be understood.

单螺杆泵成套设备与运行现场

Full text summary reference:Returning to the judgment of the supplier of the single screw pump, it can be repeated in three steps: STEP1 parameter is closed-loop to confirm whether the data such as solid particle size, concentration, viscosity, temperature, pH value, air content, flow rate, outlet pressure and continuous operation duration of the medium are complete; STEP2 structure matching, check whether stator rubber rubber type, rotor material and surface treatment, series configuration, speed interval, sealing and driving form correspond to working conditions; STEP3 operation guarantee, check whether dry rotation protection, safety valve or bypass circuit is configured, whether the pipe diameter and liquid level control of suction pipeline are reasonable, and whether spare parts and maintenance scheme are clear. During the operation phase, it is recommended to pay attention to several quantifiable indicators: the attenuation amplitude of the outlet flow relative to the rated value, the temperature rise of the stator and the bearing part, the effective value of the vibration speed, the sealing leakage and the fluctuation of the driving current. In engineering practice, the flow attenuation is usually controlled within 10% of the rated value, and the temperature rise and vibration are kept within the allowable range of the equipment technical documents as the reference line for daily inspection. What needs to be reminded is that the test of pumps with solid medium, high viscosity medium and intermittent operation conditions is not the same. Copying the parameters of similar projects often brings deviation. It is still necessary to check the medium data or small sample test before selection. For more information, please visit the official website:www.depamufluid.com。