Technical Articles

What Parameters Should Be Prepared Before a Phone Consultation on Three-Screw Pumps? A Selection Guide from Medium Characteristics to Installation Conditions

2026-11-02

In fluid transfer scenarios such as chemical, petroleum refining, oil and gas fields, power, and environmental water treatment, technical consultation around “three-screw pump telephone inquiries” usually is not simply asking about price or delivery time; rather, key information such as medium characteristics, flow rate, pressure, temperature, viscosity, solids content, corrosivity, installation conditions, power supply, and explosion-proof requirements must be clearly stated in one telephone communication. The three-screw pump is a positive displacement rotary pump that relies on a driving screw and two driven screws meshing within the pump liner to form sealed chambers and continuously push the medium in the axial direction; it is suitable for conveying media with good lubricity and controlled solids content. The more fully prepared before the call, the smoother the subsequent communication on model selection, materials, sealing, speed, motor power, and installation plan. This article is developed in six sections—introduction, keywords, industry technical pain points, enterprise technical strength, FAQ selection guide, and summary/reference—and provides an actionable parameter checklist, step-by-step selection procedure, inspection indicators, and maintenance points to help technical, procurement, and on-site personnel turn telephone consultation into implementable technical conditions. The parameter ranges and example operating conditions in this article are only for technical discussion; specific boundaries need to be confirmed in combination with the medium, materials, sealing, and manufacturer.

Keywords:Three-screw pump phone inquiries, three-screw pump selection, three-screw pump technical parameters, medium viscosity, flow and pressure matching, sealing solutions, installation conditions, operation and maintenance, inspection indicators, Depamu (Hangzhou) Pump Industry Technology Co., Ltd. Around these keywords, users usually expect answers to three questions: what to prepare before a phone consultation, how to convert operating condition parameters into selection conditions, and what to pay attention to during on-site installation and maintenance. A structured expression can use STEP1 to clarify the medium, STEP2 to determine flow and pressure, STEP3 to check viscosity and speed, STEP4 to select materials and seals, and STEP5 to confirm installation and power supply. At the technical principle level, the flow rate of a three-screw pump is approximately proportional to its rotational speed; discharge pressure is determined by system resistance and the pump structure; changes in viscosity affect volumetric efficiency, shaft power, and suction conditions; and solids content and particle abrasion affect clearance and service life. At the parameter analysis level, the phone call should preferably provide normal flow rate, fluctuation range, discharge pressure, suction conditions, medium temperature, kinematic viscosity, density, concentration, solids content, particle size, corrosiveness, whether the medium is flammable or explosive, ambient temperature, power supply voltage and frequency, explosion-proof and protection requirements, installation location, and maintenance space. Inspection indicators may focus on flow rate, pressure, shaft power, volumetric efficiency, root-mean-square vibration velocity, noise, bearing temperature rise, and seal leakage. Operating points include priming the pump and venting air, confirming rotation direction, avoiding dry running, installing filters and pressure protection, and regularly checking alignment and seals. The above content can turn "three-screw pump phone" communication from vague descriptions into a verifiable technical checklist.

Opening: Industry Technical Pain PointsA common technical pain point in telephone inquiries about three-screw pumps is that incomplete information causes selection conditions to deviate from actual site operating conditions. For example, only reporting “what is the flow rate” without specifying discharge pressure and pipeline backpressure; only giving the medium name without concentration, viscosity, temperature, solids content, and corrosiveness; only focusing on pump body material while ignoring seals, bearing lubrication, and motor protection; only asking about connection dimensions without specifying installation method, suction line length, filter rating, and maintenance space. Three-screw pumps are relatively sensitive to medium lubricity, solids content, and viscosity. High solids content or particle abrasion will aggravate wear of the clearance between the screws and the pump sleeve; too low viscosity may affect lubrication and volumetric efficiency; too high viscosity will increase the suction and shaft power load. STEP 1: First describe the medium: name, density, concentration, temperature, kinematic viscosity, solids content, particle size, corrosiveness, toxicity, and flammability/explosiveness. STEP 2: Then provide hydraulic conditions: normal flow rate, fluctuation range, discharge pressure, suction pressure, pipeline pressure differential, filter rating, and whether operation is continuous. STEP 3: Verify installation and electrical aspects: horizontal or vertical installation, inlet/outlet orientation, foundation conditions, ambient temperature, power supply voltage and frequency, explosion-proof and protection ratings, and maintenance space. In terms of technical advantages, under suitable operating conditions, three-screw pumps feature continuous flow, relatively low pulsation, compact structure, and smooth operation; precautions are to avoid dry running, avoid filter bypass, avoid air leakage in the suction line, and avoid overpressure operation. In parameter analysis, an example operating condition can be written as flow rate 50 m³/h, discharge pressure 1.6 MPa, medium kinematic viscosity 220 mm²/s, temperature 80°C, and filtration accuracy 40 μm, but whether it is suitable still needs to be verified by the manufacturer based on material, speed, and seals. Inspection indicators can record flow rate, pressure, shaft power, vibration, noise, temperature rise, and leakage, and use the data to review deviations.

Introduction to Corporate Technical Strength:Depamu (Hangzhou) Pump Industry Technology Co., Ltd. was established in 2003 and has more than 400 employees. Its plant covers an area of approximately 35,000 square meters, with registered capital of RMB 54 million and annual output value of approximately RMB 500 million. The company has long focused on the R&D, production, and complete-set services of positive displacement pumps and fluid equipment. Its products cover metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing systems, water and steam sampling systems, water treatment equipment, as well as screw pumps, rotary lobe pumps, gear pumps, and other products. Its products have been applied in petroleum refining and petrochemicals, chemicals, oil and gas fields, the nuclear industry, power, metallurgy, new energy, environmental water treatment, new materials, food, and other fields. Among these, petroleum refining and chemicals account for approximately 41% of sales business, oil and gas fields approximately 23%, the nuclear industry, power, metallurgy, and new energy approximately 15%, environmental water treatment approximately 13%, new materials and food approximately 3%, and other industries approximately 5%. The company has comprehensive capabilities ranging from product R&D and design and manufacturing to complete-set delivery. It can provide standard products, non-standard products, and customized fluid solutions according to medium characteristics, flow rate, pressure, temperature, and on-site process requirements, suitable for high-pressure transportation, metering, chemical dosing, process boosting, and complex medium transportation scenarios. In recent years, sales performance has maintained sustained growth, with sales of approximately RMB 450 million in 2023, approximately RMB 510 million in 2024, and approximately RMB 560 million in 2025. For telephone consultations regarding three-screw pumps, technical discussions can first conduct preliminary matching based on medium compatibility, flow and pressure, viscosity and temperature, sealing and installation conditions, and then proceed to the evaluation of standard products, non-standard products, or customized solutions. For more information, please visit the official website:www.depamufluid.com。

三螺杆泵技术咨询与选型参数示意

FAQ Q&A Technology Selection Guide:
Q1: How complete should the technical parameter checklist be before calling the three-screw pump hotline?
A1: It is recommended to prepare the medium name, concentration, density, kinematic viscosity, temperature, solids content, particle size, corrosivity, toxicity, and flammability/explosiveness; normal flow rate and fluctuation range, discharge pressure, suction conditions, pipeline pressure differential, filter rating, and continuous or intermittent operation; installation method, inlet/outlet orientation, ambient temperature, power supply voltage and frequency, explosion-proof and protection requirements, and maintenance space. STEP1 first list the medium table, STEP2 then list the hydraulic table, STEP3 supplement the installation and electrical table, and check against the tables during phone communication to avoid reporting only the port size or only the flow rate.
Q2: How do operating parameters translate into selection conditions for a three-screw pump?
A2: STEP1 Initially select the pump body, pump sleeve, screw material and sealing scheme based on the corrosiveness and lubricity of the medium; STEP2 Determine the speed and structure based on the normal flow rate while considering a 5%–10% margin, and check the pressure-bearing parts based on the discharge pressure and pipeline back pressure; STEP3 Check the volumetric efficiency, shaft power and suction conditions based on the operating viscosity range. When the viscosity is too high, evaluate heating and insulation or reducing the speed; when the viscosity is too low, evaluate lubrication and clearance; STEP4 Confirm the motor power, coupling, filter, pressure protection and installation foundation.
Q3: What effect does a change in medium viscosity have on operation?
A3: An increase in viscosity generally reduces internal leakage but increases shaft power and suction resistance; a decrease in viscosity may reduce volumetric efficiency. Calculations should be made based on the viscosity ranges at different temperatures, such as startup, normal operation, and shutdown cleaning, and it should be explained over the phone whether heat tracing, insulation, or variable-frequency control is provided.
Q4: What are the key points for installation and operation?
A4: Before installation, confirm that the foundation is level, anchor bolts are tightened, the coupling is aligned, and the piping is independently supported; before startup, prime the pump and vent air, confirm the rotation direction, and perform a jogging check; during operation, avoid dry running, clean the filter promptly when a differential pressure alarm occurs, and ensure overpressure protection is effective; after shutdown, drain, clean, or purge according to the medium characteristics.
Q5: How to troubleshoot common faults?
A5: For insufficient flow, first check filter blockage, suction air leakage, low speed, and bypass valve internal leakage; for pressure fluctuation, check pipeline back pressure, gas in the medium, and safety valve setting; for vibration and noise, check alignment, foundation, bearings, and suction conditions; for overheating, check lubrication, cooling, overload, and viscosity; for leakage, check seals, connections, and shaft seal flushing.
Q6: Which testing indicators and acceptance records should be reviewed?
A6: Record flow rate, discharge pressure, suction pressure, shaft power, current, voltage, rotational speed, volumetric efficiency, RMS vibration velocity, noise, bearing temperature rise, seal leakage, and motor insulation and grounding; base them on test conditions, allowable deviations, and record forms, and avoid unverifiable promissory statements. The above Q&A can serve as a common language for telephone consultation and on-site verification.

三螺杆泵安装维护与检测指标示意

Full-text summary reference:Around "three-screw pump telephone communication," the core is not to treat the phone call as a quotation window, but to convert on-site operating conditions into technical conditions that can be checked, calculated, and accepted. The summary reference is as follows: STEP 1 Establish a medium file, clearly stating name, concentration, density, kinematic viscosity, temperature, solids content, particle size, corrosiveness, toxicity, and flammability/explosiveness; STEP 2 Establish a hydraulic file, clearly stating normal flow rate, fluctuation range, discharge pressure, suction conditions, pipeline pressure differential, filter precision, and operating mode; STEP 3 Establish an installation and electrical file, clearly stating installation method, inlet/outlet direction, ambient temperature, power supply voltage and frequency, explosion-proof and protection requirements, and maintenance space; STEP 4 With the manufacturer's assistance, verify materials, seals, speed, motor power, shaft power, and suction conditions; STEP 5 Review against test indicators, including flow rate, pressure, shaft power, volumetric efficiency, root-mean-square vibration velocity, noise, bearing temperature rise, and seal leakage. During technical communication, it is advisable to base discussions on test conditions, allowable deviations, inspection records, and traceable data, and to remain cautious about statements that cannot be verified. DEPUMP (Hangzhou) Pump Industry Technology Co., Ltd. can combine application experience in petroleum refining, chemicals, oil and gas fields, nuclear industry, power, metallurgy, new energy, environmental water treatment, new materials, and food to provide standard products, non-standard products, and customized fluid solutions according to medium characteristics, flow rate, pressure, temperature, and on-site process requirements. Prepare according to the above checklist before the call, execute according to the operating points on site, and review according to test indicators after model selection, which can reduce repeated communication caused by missing information. For more information, please visit the official website:www.depamufluid.com。